Jump to content
Gibson Brands Forums

How to install Epiphone Casino pickguard


RobertoCarlosMX

Recommended Posts

Hello all,

 

I'd like to install the pickguard on my Epiphone Inspired Revolution Casino. In fact I like to install the screw that the original Lennon's Casino has.

 

That screw doesn't come with the guitar so I don't know what can I use to replace it. I also need the "screw cover" I don't know how to call it, is the part that cover the screw.

 

e32133f58259eafe885a0e0c2326a15e.jpg

 

Any suggestion?

 

Does anybody has some experience doing this?

 

Regards.

Link to comment
Share on other sites

Roberto, are you asking about the pick guard bracket? That's the only thing that I can think of that isn't provided for on a IR Casino. Like this?

pgbracket_zps949e78aa.jpg

 

Or the other style, with hidden pg attachment, what's called a 335bracket? That's what I did on my Casino, I like it better with no face screw.

IMG_3436-1.jpg

335bracket_zpsc393b7f4.jpg

gibbyblock.jpg

 

If it's the later, you'll have to have the guard made by someone like Terrapin. The ready-made guards have the screw hole already, for the first type. Something to watch out for on Casino pick guards. The pickup placement on Casinos, over the years, has varied widely. What might fit on one, may not fit on the next one. At Terrapin, for instance, you can download a full-size template and actually fit it to your particular guitar. Mark it for any adjustments and mail it to them. You'll get the correct fit.

 

All of this info is good only if I've assumed correctly what you are after. If not, stand by. Someone else will be along to take a crack at it.

Link to comment
Share on other sites

Roberto, are you asking about the pick guard bracket? That's the only thing that I can think of that isn't provided for on a IR Casino. Like this?

pgbracket_zps949e78aa.jpg

 

Hello Tweed2... Nice to see you again...

 

There are two black cylinders that protect or cover the screw in your first photo. Something like that is what I'm looking for!!!

 

Regards.

Link to comment
Share on other sites

Those black pieces are spacers that go between the pickguard and the guitars body (the hole below the fretboard), so that when you screw the pickguard down, there is no contact between it and the finish. You could try using a small black rubber washer. A normal sized pickguard screw, as found on a Tele/Strat should do the job for you.

 

Steve.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...