L8_4thesh0w Posted June 27, 2014 Share Posted June 27, 2014 Can any one tell me anything about the Epiphone EJ 212? Epiphone does not even mention it on their website. I got the most info from Wiki(yikes). I have seen several posts on it and oldest was '09. Sadly, they all have more questions than answers. Most of those who have/had one seem to like them very much, myself included. Mine needs a good setup though. Quote Link to comment Share on other sites More sharing options...
TommyK Posted July 13, 2014 Share Posted July 13, 2014 Epiphone has offered 12 string versions of many of it's models; Hummingbird, J200, etc. The 12 string is kind of a niche market, so there are not a lot of them around of any variation. 12's have a bad habit of imploding. I'm not sure if it's due to the basic design of the acoustic guitar not being conducive to applying upwards of 8 or 9 strings. or just being less forgiving for being misused or abused. True there have been harp guitars with a gazillion strings, but they were built like battleships. Today's demanding guitarist expects a certain volume and tone in modern guitars which demands they be lightly built. Congrats on your 12. I've often thought of procuring one, but never have had the opportunity to purchase whilest having the finances to afford one. Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted July 13, 2014 Author Share Posted July 13, 2014 Epiphone has offered 12 string versions of many of it's models; Hummingbird, J200, etc. The 12 string is kind of a niche market, so there are not a lot of them around of any variation. 12's have a bad habit of imploding. I'm not sure if it's due to the basic design of the acoustic guitar not being conducive to applying upwards of 8 or 9 strings. or just being less forgiving for being misused or abused. True there have been harp guitars with a gazillion strings, but they were built like battleships. Today's demanding guitarist expects a certain volume and tone in modern guitars which demands they be lightly built. Congrats on your 12. I've often thought of procuring one, but never have had the opportunity to purchase whilest having the finances to afford one. Thanks, I got it to replace an Ovation 12string Electric Pacemaker(acoustic) I let go of years before. It is Samick made and very well crafted. I am using Martin XLs and am afraid I might lose too much volume if I go even lighter. May try some John Pearse Silks. Action seems high at the nut. Even so it is easier to play than I remember the other one being. The main questions I have about it are the years it was manufactured and price range when new. I know from other posts it at least spanned 1994-1999. Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted August 8, 2014 Author Share Posted August 8, 2014 If anyone has questions about the Epiphone EJ212 - Jumbo 12-string, I've gotten some info on this lesser-known guitar. According to a source at Customer Service this model was produced from 1994 to 1998... although I have seen another owner's post who says his is a 1999. 1999 EJ212 This is to a different post for a 1994 model which was made with a plain(no inlay) bridge. 1994 EJ212 MSRP for the 1997 model, the one I picked up at a pawn shop, was $879. I have wondered if I paid too much but this is no longer a concern as it seems to be one of Epi's rarer models. I do not know the total production numbers but the few serial numbers I have seen are very low - 0001, 0002, etc., which leads me to believe there may have been only a few made each month. Serial numbers read: S 9xxx00xx - where S=Samick(Korea), 1st 2 digits=year, next 2 digits=month, last 4 digits=production for that month. It may be suffixed with CE which denotes models with cutaway and electronics, which would be likely to increase its value. Here is some additional info I found on Wikipedia which lists available colors as Ebony, Natural or Vintage Sunburst which may add an additional E or VS to the serial number. The Natural is not specified in the serial number. Epiphone EJ Series Guitars I trust this info may be useful to anyone interested in one of these guitars and am happy to post it. I love my EJ212! Quote Link to comment Share on other sites More sharing options...
Bender 4 Life Posted August 8, 2014 Share Posted August 8, 2014 i WANT one......never knew such an animal even existed! as far as needing a setup....PLEASE go a page or 3 back in this forum and check out my topic on the "JDL (JLD?) Bridge Dr." device. this little $22 unit saved my EJ200.....has the strings as low as on an American Deluxe Strat, with NO buzz.....and actually improved the sound, just like the ad said it would. it's an easy install (no hatchets involved ) and it absolutely WORKS ! Edit.....found & bumped the old thread... guess that makes me a , necrobumper! is that a new dance or an old crime? Quote Link to comment Share on other sites More sharing options...
milod Posted August 8, 2014 Share Posted August 8, 2014 I've played 12 strings of one sort or another for around 50 years - but seldom as a "main" guitar. Usually I'd de-tune it to D (standard) 'stedda E (standard). Worked well capo up 2 frets. And I still used the lightest strings I could find. Some of the older 12s had a floating bridge and tailpiece as on an archtop. I tended to trust that more than the prettier pin bridge, but... Down to 2 12s now, one a standard AE with solid top and lam back and sides, and one an all-lam acoustic I added a mag pup to. Both pretty well built cheapies - and I bought cheapies on the assumption that something's likely to go wrong. I've a hunch that especially the lam top may last better. Thing with detuning a bit, regardless of string gauge, is that to keep any decent action I think you're going to want to ensure your technique is more parallel to the top, and that keeps the buzz down. Back in the mid '70s I almost could have been said to be playing mine more as an autoharp where there's no choice but to play parallel to the plane of the strings. My understanding is that Kottke plays with his 12s detuned one way or another, and I figure he's pretty good at playing the thing. BTW, sometimes I envy guys in more crowded areas where there are more guitar options. Then again, I'd probably not have the cash for gasoline were I to have those options - and instruments. <grin> m Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted August 8, 2014 Author Share Posted August 8, 2014 I literally could not help myself. I walked in and there she was sitting on a stand in the middle of the aisle saying, "Take me, take me!" What else could I do? The real attraction is it seems, to me anyway, to be somewhat more substantial than the Alvarez or Takemine and other stuff you usually see and the jumbo size and shape has some projection. Play on fellas folks! Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted October 27, 2014 Author Share Posted October 27, 2014 Finally got some good pics. Needs a good cleaning... next string change. Now the only question left unanswered is how many were produced in total? ϵβ Quote Link to comment Share on other sites More sharing options...
DennisB643 Posted October 29, 2014 Share Posted October 29, 2014 I've played 12 strings of one sort or another for around 50 years - but seldom as a "main" guitar. Usually I'd de-tune it to D (standard) 'stedda E (standard). Worked well capo up 2 frets. And I still used the lightest strings I could find. Some of the older 12s had a floating bridge and tailpiece as on an archtop. I tended to trust that more than the prettier pin bridge, but... Down to 2 12s now, one a standard AE with solid top and lam back and sides, and one an all-lam acoustic I added a mag pup to. Both pretty well built cheapies - and I bought cheapies on the assumption that something's likely to go wrong. I've a hunch that especially the lam top may last better. Thing with detuning a bit, regardless of string gauge, is that to keep any decent action I think you're going to want to ensure your technique is more parallel to the top, and that keeps the buzz down. Back in the mid '70s I almost could have been said to be playing mine more as an autoharp where there's no choice but to play parallel to the plane of the strings. My understanding is that Kottke plays with his 12s detuned one way or another, and I figure he's pretty good at playing the thing. BTW, sometimes I envy guys in more crowded areas where there are more guitar options. Then again, I'd probably not have the cash for gasoline were I to have those options - and instruments. <grin> m I played them back in the 70's and yes we would always tune them down a step to D and then capo at the 2nd fret. I could be wrong about this but the Taylor Kottke model (which I've heard him play several times in concert) is recommended to be tuned down to C#...that's how he got that low rumbling sound. I see so many on Ebay with imploded bodies where the neck joins and it's a shame. I have been looking to add one again (sold my Guild F412 in 83') but I just can't trust the ones on ebay. Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted October 29, 2014 Author Share Posted October 29, 2014 I played them back in the 70's and yes we would always tune them down a step to D and then capo at the 2nd fret. I could be wrong about this but the Taylor Kottke model (which I've heard him play several times in concert) is recommended to be tuned down to C#...that's how he got that low rumbling sound. I see so many on Ebay with imploded bodies where the neck joins and it's a shame. I have been looking to add one again (sold my Guild F412 in 83') but I just can't trust the ones on ebay. This thing is built. Take a close look at the last photo, especially just inside the sound hole and you'll see what looks like part of a 2x4. I included the side and 3/4 shots to show there is absolutely no belly bulge and no bridge separation. I have it tuned to standard pitch and it has been since the day I got it. I have no doubt it will hold up well. ϵβ Quote Link to comment Share on other sites More sharing options...
milod Posted October 29, 2014 Share Posted October 29, 2014 I does look well-designed and crafted. So, I'd add, was the old Stella available in the early '60s. That was my first 12. Trapeze tailpiece stedda a bridge/tailpiece that would by nature have a degree of torque to exert on the top. 12s are interesting creatures. Yeah, I think too many were under-engineered at the time when there was a lot of demand. m Quote Link to comment Share on other sites More sharing options...
Cougar Posted October 29, 2014 Share Posted October 29, 2014 I literally could not help myself. I walked in and there she was sitting on a stand in the middle of the aisle saying, "Take me, take me!" From your photos, that's quite understandable. Quote Link to comment Share on other sites More sharing options...
rct Posted October 29, 2014 Share Posted October 29, 2014 I literally could not help myself. No kiddin! I don't even want a 12 string and I want that thing! rct Quote Link to comment Share on other sites More sharing options...
milod Posted October 29, 2014 Share Posted October 29, 2014 Yeah... I look at it and think... Wow. Then I think, "I wonder what Gary Davis would have thought of it..." Too big a box for me to be comfortable with but then... so are my two dread 12s. This ... wow. m Quote Link to comment Share on other sites More sharing options...
cliffmac Posted October 30, 2014 Share Posted October 30, 2014 I saw the pics and wow truly never wanted one till now Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted October 30, 2014 Author Share Posted October 30, 2014 Thanks all for your wonderful comments! She is a bit on the ample side so I do "choke up" a little from the back end. Just let it hang off my right side a bit more. One thing I definitely prefer over the old Pacemaker is the balance. The roundback bowl just makes them really neck heavy. The Epi is much better in that respect. Actually tuned it down to D today. A first for me on any guitar. Still trying to get used to it but thought I might as well try. The old fingers are getting a little stiff these days. Wouldn't mind trying out the CE model with the cutaway and electronics maybe sometime if one popped up. Looking into getting an under saddle type pup for this one. Thanks again! ϵβ Quote Link to comment Share on other sites More sharing options...
DennisB643 Posted November 6, 2014 Share Posted November 6, 2014 Epiphone has offered 12 string versions of many of it's models; Hummingbird, J200, etc. The 12 string is kind of a niche market, so there are not a lot of them around of any variation. 12's have a bad habit of imploding. I'm not sure if it's due to the basic design of the acoustic guitar not being conducive to applying upwards of 8 or 9 strings. or just being less forgiving for being misused or abused. True there have been harp guitars with a gazillion strings, but they were built like battleships. Today's demanding guitarist expects a certain volume and tone in modern guitars which demands they be lightly built. Congrats on your 12. I've often thought of procuring one, but never have had the opportunity to purchase whilest having the finances to afford one. I think you hit the nail on the head. I played 12 string exclusively in the 70's and we used to tune them down a step, but even then they have to be properly cared for (humidified). Unfortunately some of the Epi 12's I see on Ebay have imploded or the neck is severely bowed resulting in lousy action which may (or may not) be able to be corrected by a couple of turns on the truss rod(s). Most are just two risky to buy....that's my take on it anyway... Quote Link to comment Share on other sites More sharing options...
Cougar Posted November 6, 2014 Share Posted November 6, 2014 I love my EJ212! Here's an early 70s Epiphone FT-160 Texan. Probably has about 2 hours of play on it. Bolt-on neck (my luthier/tech says that makes for an easy setup). Anyway, after a setup and new strings, this thing really projects! I love playing this FT-160! . . Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted November 6, 2014 Author Share Posted November 6, 2014 Here's an early 70s Epiphone FT-160 Texan. Probably has about 2 hours of play on it. Bolt-on neck (my luthier/tech says that makes for an easy setup). Anyway, after a setup and new strings, this thing really projects! I love playing this FT-160! Very nice! Looks like it has a good strong neck as well. I love the color and the nickel hardware. '70s weren't all bad like some tend to think. ϵβ Quote Link to comment Share on other sites More sharing options...
milod Posted November 6, 2014 Share Posted November 6, 2014 Cupla points... First: http://www.jldguitar.net/warped_tops/fixtop.html Second... I'm not so sure that a laminate top on 12s may not be a better idea than solid wood, especially if they're not engineered much better than the six-string designs they're modeled after. I have a really cheapie Rogue 12 I added a mag pup to soon after I got it, and it's tuned to standard pitch. Lousy piece in some ways, but played through an amp it does fine, and the neck actually ain't bad at all. Third... I've never had that good luck with silk and steels on a 12 even though my preferences are for very light strings. Finally, IMHO anyone who gets a decently engineered 12 may want to consider mostly playing it either as an electric with an add-on soundhole mag pup, or if it's an AE, as an AE. I think it allows a bit more flexibility of playing, tunings, etc. I do tend to detune a 12 to D standard 'stedda E standard. One of my "trade regrets" is a Hagstrom solidbody 12 I had back in the '70s, purchased used but... far better than it was credited to be. m Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted November 6, 2014 Author Share Posted November 6, 2014 Bender4life bumped an earlier thread about his installation of the JLD device in a 200. Forum Link There's a little more about the situation with my 212 not mentioned in this thread, but I'm good with it anyway... nothing that can't be cured. ϵβ Quote Link to comment Share on other sites More sharing options...
duane v Posted December 10, 2014 Share Posted December 10, 2014 Finally got some good pics. Needs a good cleaning... next string change. Now the only question left unanswered is how many were produced in total? Σß You want to sell her? Quote Link to comment Share on other sites More sharing options...
L8_4thesh0w Posted December 10, 2014 Author Share Posted December 10, 2014 You want to sell her? Sorry, no Duane I couldn't part with her. She's with a Gibson/Epiphone authorized luthier as of Tuesday evening for some minor fret work & a bone nut and saddle. 1st & 2nd frets & nut are a tad high. He says he hasn't seen many of them either. I have yet to see a CE model myself, except for a pic, but if I were a gigging musician I would prefer the cutaway and electronics. I'll keep my fingers crossed that one will pop up for you. It's a great guitar for the money. I doubt anything in its price range could compare. But you probably know that seeing as how you have the real deal with those beauties you have there! Quote Link to comment Share on other sites More sharing options...
DennisB643 Posted December 11, 2014 Share Posted December 11, 2014 Man, that's a pretty guitar... Quote Link to comment Share on other sites More sharing options...
Muddy Dave Posted February 16, 2017 Share Posted February 16, 2017 I just picked up and EJ-212CE VS Serial no. GG07010378. I have read that they were made between 94 and 99. Mine may be a Masterbuilt according to one set of info I read. The rosewood on the fretboard is the same as my'65 Elitist Casino. It needs new strings and a slight adjustment to the neck but other than that it's in fine shape. Some of the design on the pick guard has been scrubbed off. The serial No. without the GG , according to the guitar dater project, says it's USA made. Not much info out there and I'm interested in any and all info I can get. I believe I got a good deal on it at $350.00 CDN with HSC. Any and all information appreciated. Thanks, Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.