mapletop Posted July 27, 2014 Share Posted July 27, 2014 hi saw a gibson 2014 standard plus .i like the wiring it had a bypass,coil split and phaze reverse push pull knobs.does anyone make a wiring harness for all this?or diagram showing how to do this? email me mapletop@hotmail.com Link to comment Share on other sites More sharing options...
Jon S. Posted July 28, 2014 Share Posted July 28, 2014 Email us at service@gibson.com and we can send you a schematic. Link to comment Share on other sites More sharing options...
Andeus Posted July 29, 2014 Share Posted July 29, 2014 Oh that's an interesting modification. Mapletop if you go ahead and do it, tell us how hard it is to do and how much it would cost. Link to comment Share on other sites More sharing options...
mapletop Posted August 5, 2014 Author Share Posted August 5, 2014 ok i will.i think gibsons pbcboard is long shafts and epiphones are short shafts so that might be trouble. Link to comment Share on other sites More sharing options...
Jon S. Posted August 5, 2014 Share Posted August 5, 2014 ok i will.i think gibsons pbcboard is long shafts and epiphones are short shafts so that might be trouble. You would need to replace all the pots unless your guitar has 4 push/pull pots. Link to comment Share on other sites More sharing options...
cdouglas Posted August 20, 2014 Share Posted August 20, 2014 This is what I put into my Epi LP over a year ago and I like it alot. http://douglas2000.com/joomla/jimmy-page-wiring You need pickups with 4 conductors and 4 push/pull pots. Parts were not expensive that I got from Ebay. Iet took me about an hour to wire it and got it right the first time, but I have done projects similar to this before, just not in a guitar. -Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.