scooterx2 Posted January 9, 2015 Share Posted January 9, 2015 Hi all after reading several of the posts on the the forum I've decided to give the min etune a chance before replacing it so that said the first time I charged the battery and replaced it in the unit then tried to tune up the low E and high e wouldn't tune (standard tuning) don't know what I did wrong Ive read the manuals and followed the instructions kind of frustrated with it cause there are no special instructions on what you need to do after changing the the battery any ideas? Link to comment Share on other sites More sharing options...
Searcy Posted January 9, 2015 Share Posted January 9, 2015 What you say the low and high E won't tune do you mean they don't reach the right pitch or they don't try to tune at all. In other words, do the tuners ever move after you install the battery? Link to comment Share on other sites More sharing options...
scooterx2 Posted January 10, 2015 Author Share Posted January 10, 2015 Hi Searcy no it didn't move at all seemed like it was tuning to dadgbd a tuning I had never used in fact I've only used standard turning? Anyway I tuned up manually and today it worked albeit several of the strings tuned a little flat? Link to comment Share on other sites More sharing options...
Searcy Posted January 10, 2015 Share Posted January 10, 2015 One thing I think I have noticed recently is this. If I'm playing at loud volume through an amp and I try to let the Min-eTune tune the guitar with the volume up the extra vibrations caused by the sound from the amp and speakers seem to confuse the system. Link to comment Share on other sites More sharing options...
scooterx2 Posted January 10, 2015 Author Share Posted January 10, 2015 Thanks Searcy for your help I'll make a note for later reference Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.