Gibson Brands Forums: Hercules DJ Control Jogvision - Gibson Brands Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Hercules DJ Control Jogvision Controller Script

#1 User is offline   DJ Phatso 

  • Member
  • Group: All Access
  • Posts: 25
  • Joined: 02-September 15

Posted 03 November 2015 - 11:35 AM

Important: Before proceeding, set the following parameter in the DJControl Jogvision control panel:

- Set MIDI pitch resolution to 7-bits

Decks:

Sync = Sync lock.
Cue = Stutter Cue point (Retrigger playback, hold and press play to continue).
Play = Play/Pause.
SHIFT + Play = Return to beginning of loaded song.

Jog (Vinyl Button On) = Scratch playback (dont push down for pitch bend only).
Jog (Vinyl Button Off) = Pitch bend (push down for stronger pitch bend).

Pitch Fader = Tempo.

Pads - Cue 1-4:

Pad 1 = Set and trigger Hot Cue 1.
Pad 2 = Set and trigger Hot Cue 2.
Pad 3 = Set and trigger Hot Cue 3.
Pad 4 = Set and trigger Hot Cue 4.

Shift + Pad 1 = Delete Hot Cue 1.
Shift + Pad 2 = Delete Hot Cue 2.
Shift + Pad 3 = Delete Hot Cue 3.
Shift + Pad 4 = Delete Hot Cue 4.

Pads - Sample:

Pad 1 = Trigger Sampler 1 (Sampler 5 on Deck B).
Pad 2 = Trigger Sampler 2 (Sampler 6 on Deck B).
Pad 3 = Trigger Sampler 3 (Sampler 7 on Deck B).
Pad 4 = Trigger Sampler 4 (Sampler 8 on Deck B).

Pads - Cue 5-8:

Pad 1 = Set and trigger Hot Cue 5.
Pad 2 = Set and trigger Hot Cue 6.
Pad 3 = Set and trigger Hot Cue 7.
Pad 4 = Set and trigger Hot Cue 8.

Shift + Pad 1 = Delete Hot Cue 5.
Shift + Pad 2 = Delete Hot Cue 6.
Shift + Pad 3 = Delete Hot Cue 7.
Shift + Pad 4 = Delete Hot Cue 8.


Pads - Sample Bank:

Pad 1 = Trigger Gross Beat Slot 1.
Pad 2 = Trigger Gross Beat Slot 2.
Pad 3 = Trigger Gross Beat Slot 3.
Pad 4 = Trigger Gross Beat Slot 4.



Loop Mode:

Loop X 1/2 = Half loop size
LOOP ON = Loop on/off (when you end looping playback resumes from end of loop).
Loop X 2 = Double loop size.

Shift + Loop X 1/2 = Move loop left (when no loop or leap enabled moves playback position).
Shift + Leap on/off = (when you end looping playback resumes from where it would have been without looping).
Shift + Loop X 2 = Move loop right (when no loop or leap enabled moves playback position).

Loop Encoder (Single and Multi mode) = Loop Half/Double size



Fx MODE:

FX 1 = FX1 on/off
FX 2 = FX2 on/off
FX 3 = FX3 on/off


FX Encoder (Single mode) = FX dry/Wet
FX 1/2/3 Buttons + Encoder (Single mode) = Individual FX LFO speed
FX Encoder (Multi mode) = Simultanious FX LFO speed


AIR FX:

AIR Control = LOW pass Filter.
SHIFT + AIR Control = High pass Filter.


Browser:

Browser Knob = Playlist up/down - Directory up/down .
Browser button = Switch betwenn Playlist and Directory.
SHIFT + Browser Knob = Deck Gain

LOAD A = Load track to deck A / Expand - Collapse (when in Directory view)
LOAD B = Load track to deck B

Vinyl Button = Activate scratch mode for Jog wheels.
Mic Button = Activate microphone input (in hardware).
Panel Button = Record
Load/Prepare Button = Automix

Cue Button = Switch monitor cue level to max.
Mix Button = Switch monitor cue mix to 50%.

Other controls as labeled.


--------------------------------------

Changes with v2.43:

- Modifications related to new scripts functions (v2.42)
- Modified LED behavior
- Minor bug fixes

Attached File(s)


0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users