Gibson Guitar Board: Dj Controller Support - Gibson Guitar Board

Jump to content

  • (4 Pages)
  • +
  • 1
  • 2
  • 3
  • 4
  • You cannot start a new topic
  • You cannot reply to this topic

Dj Controller Support

#41 Guest_Ban_*

  • Group: Guests

Posted 11 October 2016 - 07:05 PM

Hi Luis,

I answer bellow.

> Are you using the built-in script for the DJC.4 (StantonDj?)

Yes. I'm not using another script.
I installed Deckadance and a ASIO driver and immediately, connected DJC.4. After a connection, MIDI interface was chosen from the Deckadance.
It's DJC.4 of STANTON to use it of course.

> Are you trying to map it via the MIDI learn function?

No. I'm not using the MIDI learn function.

> Are you creating a MIDI script from scratch?

No. I'm using default script only.


When a script was seen, the command every deck was gathered, and I found out that the command of nothing is mentioned every deck. A strange phenomenon.
Is there a way to initialize setting of DJC.4 body?

Thanks!

Ban
0

#42 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 13 October 2016 - 10:48 AM

There was a bug in the DJC.4 script (...thanks for report it). I have update the script, go to the first post and follow the instructions there to update it.
0

#43 Guest_DJ/JD$_*

  • Group: Guests

Posted 13 October 2016 - 03:42 PM

I'm using a cmd studio 4a which I had previously discovered had a bad internal interface. In hopes of still using it anyway this weekend in a pinch. I have an external umc204 interface and have sound configured correctly for my main outs. Recently began using virtualdj software at another club that allowed me to configure a second out for my headphone cue through my computer's headphone jack. Is this also possible with deckadance as well? I would much rather use it instead of virtualdj but I am having trouble configuring this same setting.
0

#44 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 13 October 2016 - 05:01 PM

It's possible but you will need to use ASIO4ALL for Windows: http://www.stantondj...gs_asio4all.htm
or Agreggator for Mac: http://www.stantondj...ettings_osx.htm
0

#45 Guest_DJ/JD$_*

  • Group: Guests

Posted 14 October 2016 - 01:42 AM

I will try that thanks
0

#46 Guest_ArcaneOblivion_*

  • Group: Guests

Posted 14 October 2016 - 10:56 PM

Numark NS7III Support?
0

#47 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 17 October 2016 - 11:02 AM

View PostArcaneOblivion, on 14 October 2016 - 10:56 PM, said:

Numark NS7III Support?

I'm sorry, this controller isn't going to be supported by DD.
0

#48 User is offline   Conect 

  • Newbie
  • Group: Members
  • Posts: 5
  • Joined: 07-August 16

Posted 22 November 2016 - 02:31 AM

Still no Vestax VCI-400?
1

#49 User is offline   TheMoroney 

  • Member
  • Group: Members
  • Posts: 56
  • Joined: 14-May 15
  • LocationUSA

Posted 30 November 2016 - 01:21 PM

Luis, did you ever get around to fixing the bug in the M-Audio XsessionPro script I pointed out awhile ago?
Author of the Numark DJ2GO script for Deckadance
Author of the Numark Orbit script for Deckadance
Author of the updated version of the script for the M-Audio Xponent
Deckadance user since 2014
FL Studio user since 2013
The Unofficial Numark and M-Audio Script writing person.
0

#50 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 30 November 2016 - 01:28 PM

To be honest I don't remember if I updated the code. In the last release the MIDI script code is (for deck A,B pitch):
case 0x0C:    set(PITCH_A, 1.0 - midiPitchTable[value]); break;
case 0x0F:    set(PITCH_B, 1.0 - midiPitchTable[value]); break;


If it's reversed then the correct code is:
case 0x0C:    set(PITCH_A, midiPitchTable[value]); break;
case 0x0F:    set(PITCH_B, midiPitchTable[value]); break;


Note that you can reverse the crossfader direction in "Preferences->Global Settings->Mixer Settings->Enable crossfader reverse"
0

#51 User is offline   serg 

  • Newbie
  • Group: Members
  • Posts: 2
  • Joined: 01-December 16

Posted 01 December 2016 - 08:21 PM

Hi Luis my name is Sergio and am new to deckadance. Love the program so far. Was wondering if by any chance you have a script for a hercules dj console rmx complete? I tried to use Fortissimos one but it seems to lack some features. Thanks.
0

#52 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 02 December 2016 - 01:19 PM

Hi Sergio, I'm sorry, I don't have any MIDI script for the Hercules RMX.
0

#53 User is offline   serg 

  • Newbie
  • Group: Members
  • Posts: 2
  • Joined: 01-December 16

Posted 03 December 2016 - 09:52 PM

Thanks for the reply Luis. I'm going to try to code it and if I can get all the parameters to function I will post it up if that is ok to do. Thank you.
0

#54 User is offline   manducator 

  • Newbie
  • Group: Members
  • Posts: 5
  • Joined: 06-January 16

Posted 17 January 2017 - 02:58 AM

I can't get my Hercules DJ Console MK2 to work.

Has support stopped for that controller?
0

#55 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 17 January 2017 - 02:23 PM

Yes, I'm sorry. It's not supported since DD 2.50.
0

#56 User is offline   TheMoroney 

  • Member
  • Group: Members
  • Posts: 56
  • Joined: 14-May 15
  • LocationUSA

Posted 23 January 2017 - 05:21 PM

View PostLuis Serrano, on 30 November 2016 - 01:28 PM, said:

To be honest I don't remember if I updated the code. In the last release the MIDI script code is (for deck A,B pitch):
case 0x0C:    set(PITCH_A, 1.0 - midiPitchTable[value]); break;
case 0x0F:    set(PITCH_B, 1.0 - midiPitchTable[value]); break;


If it's reversed then the correct code is:
case 0x0C:    set(PITCH_A, midiPitchTable[value]); break;
case 0x0F:    set(PITCH_B, midiPitchTable[value]); break;


Note that you can reverse the crossfader direction in "Preferences->Global Settings->Mixer Settings->Enable crossfader reverse"

Thanks for the update, I just recently got my main system back up and online, I will go and investigate it to see if it was fixed in any of the updates, if not I will post a updated file with the corrected code.

UPDATE:

Ended up taking a look at some of the midi CC channels using the midi editor function. Turns out the case id for the crossfader was wrong.

The original line of code reads:

case 0x14: set(CROSSFADER, value01); break;

This line in the script file I am going to upload has been edited to read:

case 0x11: set(CROSSFADER, value01); break;

Edited on 1/24/2017 to post edited file.

Attached File(s)


Author of the Numark DJ2GO script for Deckadance
Author of the Numark Orbit script for Deckadance
Author of the updated version of the script for the M-Audio Xponent
Deckadance user since 2014
FL Studio user since 2013
The Unofficial Numark and M-Audio Script writing person.
0

#57 User is offline   DJ Phatso 

  • Member
  • Group: Members
  • Posts: 17
  • Joined: 02-September 15

Posted 25 January 2017 - 12:50 PM

View PostLuis Serrano, on 17 January 2017 - 02:23 PM, said:

Yes, I'm sorry. It's not supported since DD 2.50.


Was this because the mappings we done for the old version or you just felt support for older controllers was not necessary anymore ?

If the first case, I could easily redo the mapping so they are DD2 compliant :)
The Phat one!

Hercules DJ Support Team
0

#58 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 25 January 2017 - 01:01 PM

View PostDJ Phatso, on 25 January 2017 - 12:50 PM, said:

Was this because the mappings we done for the old version or you just felt support for older controllers was not necessary anymore ?

If the first case, I could easily redo the mapping so they are DD2 compliant :)

It's due to the fact that the old mapping was done in C++ and it hasn't been updated to the script format. C++ mappings were removed since 2.50, some of them were translated to scripts but others are in the waiting list. It would be nice to have a script for the Dj console controller, after all, it is the father of the current MIDI controllers ;-).
0

#59 User is offline   TheMoroney 

  • Member
  • Group: Members
  • Posts: 56
  • Joined: 14-May 15
  • LocationUSA

Posted 27 January 2017 - 10:53 PM

Luis, wouldn't most of DJ Phatso's scripts that he wrote on the imageline forums still work in the new versions of deckadance? Also if you get a chance and are able to find any of the c++ code for the xponent it would be a huge help. The script I posted today is as close as I can get it to what I can remember, but I bet I could get it even closer if I had a reference file to work from.
Author of the Numark DJ2GO script for Deckadance
Author of the Numark Orbit script for Deckadance
Author of the updated version of the script for the M-Audio Xponent
Deckadance user since 2014
FL Studio user since 2013
The Unofficial Numark and M-Audio Script writing person.
0

#60 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 449
  • Joined: 30-April 15

Posted 30 January 2017 - 11:29 AM

View PostTheMoroney, on 27 January 2017 - 10:53 PM, said:

Luis, wouldn't most of DJ Phatso's scripts that he wrote on the imageline forums still work in the new versions of deckadance? Also if you get a chance and are able to find any of the c++ code for the xponent it would be a huge help. The script I posted today is as close as I can get it to what I can remember, but I bet I could get it even closer if I had a reference file to work from.

All behringer script controllers has been written by DJ Phatso (...you can check them in the script folders), he has been updating the scripts with major releases changes. Old ImageLine forum scripts will probably work fine with new versions of DD. I'm going to send the xponent source code via private message but take into account that it's going to be somewhat different to MIDI scripts.
0

Share this topic:


  • (4 Pages)
  • +
  • 1
  • 2
  • 3
  • 4
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users