Gibson Brands Forums: Dj Controller Support - Gibson Brands Forums

Jump to content

  • (5 Pages)
  • +
  • « First
  • 2
  • 3
  • 4
  • 5
  • You cannot start a new topic
  • You cannot reply to this topic

Dj Controller Support

#61 User is offline   TheMoroney 

  • Member
  • Group: All Access
  • Posts: 74
  • Joined: 14-May 15
  • LocationUSA

Posted 30 January 2017 - 04:17 PM

View PostLuis Serrano, on 30 January 2017 - 11:29 AM, said:

I'm going to send the xponent source code via private message but take into account that it's going to be somewhat different to MIDI scripts.


Thanks Luis, I got the code. Deffinately a huge help as to seeing what some of the old button functions were. I would say with it, I will be able to update my posted copy of the script to be 80% identical as far as functionality to DD v2.4. I think that the few changes that will be made are going to be ones that most people would agree to be beneficial without removing too much of what they know.
Guest Script Writer (IE, I do not work for Stanton, Gibson, or any of their associated brands, nor do I work any other companies who are in the industry. This also means I do not get any compensation for the scripts I write. All scripts that are written by me and all help given by me is to be acknowledged as one user helping another.)
Author of the Numark DJ2GO script for Deckadance (included in 2.72)
Author of the Numark Orbit script for Deckadance (included in 2.72)
Author of the updated version of the script for the M-Audio Xponent (included in 2.72)
Author of the Akai APK Mini script for Deckadance (included in 2.72)
Author of the Numark Mixtrack 3 script for Deckadance (included in 2.72)
Deckadance user since 2014
FL Studio user since 2013
0

#62 User is offline   DJ Phatso 

  • Member
  • Group: All Access
  • Posts: 20
  • Joined: 02-September 15

Posted 31 January 2017 - 10:23 AM

View PostLuis Serrano, on 30 January 2017 - 11:29 AM, said:

All behringer script controllers has been written by DJ Phatso (...you can check them in the script folders),


Actually, that would be the Hercules scripts ;)

I've started something basic that will work, but I'm no looking to do elaborate scripts for the older products.
The Phat one!

Hercules DJ Support Team
0

#63 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 630
  • Joined: 30-April 15

Posted 31 January 2017 - 11:25 AM

View PostDJ Phatso, on 31 January 2017 - 10:23 AM, said:

Actually, that would be the Hercules scripts ;)

Apologies, I don't know what I was thinking when I wrote that reply #-o. I did the Behringer scripts.

DJ Phatso said:

I've started something basic that will work, but I'm no looking to do elaborate scripts for the older products.

Nice, thanks!
0

#64 User is offline   fxdagenius 

  • Newbie
  • Group: All Access
  • Posts: 2
  • Joined: 23-March 17

Posted 23 March 2017 - 04:16 PM

View PostConect, on 22 November 2016 - 02:31 AM, said:

Still no Vestax VCI-400?

Hello Luis, how is the script for the VCI-400 coming?
Thank you for all your hard work.
FxDaGenius
0

#65 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 630
  • Joined: 30-April 15

Posted 24 March 2017 - 12:08 PM

I'm sorry to say that I haven't finished the VCI-400 script yet :(. It's in the queue but I'm not sure when it will be ready.
0

#66 User is offline   TheMoroney 

  • Member
  • Group: All Access
  • Posts: 74
  • Joined: 14-May 15
  • LocationUSA

Posted 28 March 2017 - 11:20 AM

View Postfxdagenius, on 23 March 2017 - 04:16 PM, said:

Hello Luis, how is the script for the VCI-400 coming?
Thank you for all your hard work.
FxDaGenius

Fxdagenius, if you can map out the controls using the built in mapping tool, and upload the results, I could throw together a script for you, it just wouldn't have any midi out unless I manage to find documentation for how vestax implemented midi. I would also need someone to be willing to test it as I don't own this controller (starting to move more into DVS personally.)
Guest Script Writer (IE, I do not work for Stanton, Gibson, or any of their associated brands, nor do I work any other companies who are in the industry. This also means I do not get any compensation for the scripts I write. All scripts that are written by me and all help given by me is to be acknowledged as one user helping another.)
Author of the Numark DJ2GO script for Deckadance (included in 2.72)
Author of the Numark Orbit script for Deckadance (included in 2.72)
Author of the updated version of the script for the M-Audio Xponent (included in 2.72)
Author of the Akai APK Mini script for Deckadance (included in 2.72)
Author of the Numark Mixtrack 3 script for Deckadance (included in 2.72)
Deckadance user since 2014
FL Studio user since 2013
0

#67 User is offline   Blank_Disk 

  • Newbie
  • Group: All Access
  • Posts: 7
  • Joined: 13-February 16

Posted 14 May 2017 - 03:43 PM

any clue how far in the future we will be seeing support for pioneer equipment, I have an ddj-sx2 and would like a mapping to become available, would map it myselfself but lack of a shift key or modifiers in the midi learn section limits the mapping facility.
Stupidity is another form of natural selection.
0

#68 User is offline   TheMoroney 

  • Member
  • Group: All Access
  • Posts: 74
  • Joined: 14-May 15
  • LocationUSA

Posted 14 May 2017 - 04:07 PM

View PostBlank_Disk, on 14 May 2017 - 03:43 PM, said:

any clue how far in the future we will be seeing support for pioneer equipment, I have an ddj-sx2 and would like a mapping to become available, would map it myselfself but lack of a shift key or modifiers in the midi learn section limits the mapping facility.


Currently there are 2 ways controllers have been getting added to Deckadance. 1, Louis somehow aquires the controller (be it from a manufacturer or Deckadance user) and programs it. Or option 2, I find it somewhere cheap on eBay and program it. Those seem to be the main ways controller code is currently being written. As far as a shift button, I encourage you to download either my mapping for the m-audio xponent or the Numark mixtrack 3 pro. Either of those files will show you how to write code for how to handle a shift button in Deckadance.

Best regards

TheMoroney
Guest Script Writer (IE, I do not work for Stanton, Gibson, or any of their associated brands, nor do I work any other companies who are in the industry. This also means I do not get any compensation for the scripts I write. All scripts that are written by me and all help given by me is to be acknowledged as one user helping another.)
Author of the Numark DJ2GO script for Deckadance (included in 2.72)
Author of the Numark Orbit script for Deckadance (included in 2.72)
Author of the updated version of the script for the M-Audio Xponent (included in 2.72)
Author of the Akai APK Mini script for Deckadance (included in 2.72)
Author of the Numark Mixtrack 3 script for Deckadance (included in 2.72)
Deckadance user since 2014
FL Studio user since 2013
0

#69 User is offline   Geeso 

  • Newbie
  • Group: Members
  • Posts: 5
  • Joined: 01-November 17

Posted 01 November 2017 - 02:49 PM

Hi I have bought deckadance 2.72DVS edition recently for $79 . I have a behringer CMDstudio4A. What is the latest drivers available to download for my controller to work perfectly with deckadance 2.72DVS edition and where can I download it from.
0

#70 User is offline   Geeso 

  • Newbie
  • Group: Members
  • Posts: 5
  • Joined: 01-November 17

Posted 01 November 2017 - 02:49 PM

Hi I have bought deckadance 2.72DVS edition recently for $79 . I have a behringer CMDstudio4A. What is the latest drivers available to download for my controller to work perfectly with deckadance 2.72DVS edition and where can I download it from.
0

#71 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 630
  • Joined: 30-April 15

Posted 01 November 2017 - 03:41 PM

View PostGeeso, on 01 November 2017 - 02:49 PM, said:

Hi I have bought deckadance 2.72DVS edition recently for $79 . I have a behringer CMDstudio4A. What is the latest drivers available to download for my controller to work perfectly with deckadance 2.72DVS edition and where can I download it from.

You can download the latest drivers (USB Audio/MIDI Driver 1.7.0) at the bottom of the following site: https://www.music-gr...P0809/downloads
0

#72 User is offline   Geeso 

  • Newbie
  • Group: Members
  • Posts: 5
  • Joined: 01-November 17

Posted 01 November 2017 - 09:39 PM

That is the same driver I am currently running my controller with I downloaded it from image-line.
0

#73 User is offline   Blank_Disk 

  • Newbie
  • Group: All Access
  • Posts: 7
  • Joined: 13-February 16

Posted 11 November 2017 - 03:59 AM

I recently asked about implementing a shift key, I'm pretty good at picking stuff up but never dabbled with programming, is there an easy way to just add the function to the midi learn editor from the main dd commands file in the actual Deckadance folder?
Stupidity is another form of natural selection.
0

#74 User is offline   Matt2323 

  • Newbie
  • Group: Members
  • Posts: 2
  • Joined: 12-November 17

Posted 18 November 2017 - 12:52 PM

Hi Luis, I have DJ-tech 101 controller which was supported with 2.5 version. I try to rule it with midi learning but i don't know how to rule some functions (i don't know script but i can try...). Sorry for my english, I try to explain functions I need to rule:

1/ how can I rule correctly scratching whith the jog wheel? (it doesn't work for me with midi learning jog scratch function)

2/ I found the midi learning cut function which is very good (i used it inverted) but i need it with button push and release information (otherwise i have to push two times in order to cut and release) if not possible with a button of cdj-101 as the button may not have the release information, i would do it from a classical midi keyboard as i know the release information is available, i also didn't manage to do that with a keayboard.

Thank you so much for your help!
0

#75 User is offline   TheMoroney 

  • Member
  • Group: All Access
  • Posts: 74
  • Joined: 14-May 15
  • LocationUSA

Posted 20 November 2017 - 06:41 PM

View PostMatt2323, on 18 November 2017 - 12:52 PM, said:

Hi Luis, I have DJ-tech 101 controller which was supported with 2.5 version. I try to rule it with midi learning but i don't know how to rule some functions (i don't know script but i can try...). Sorry for my english, I try to explain functions I need to rule:

1/ how can I rule correctly scratching whith the jog wheel? (it doesn't work for me with midi learning jog scratch function)

2/ I found the midi learning cut function which is very good (i used it inverted) but i need it with button push and release information (otherwise i have to push two times in order to cut and release) if not possible with a button of cdj-101 as the button may not have the release information, i would do it from a classical midi keyboard as i know the release information is available, i also didn't manage to do that with a keayboard.

Thank you so much for your help!

The answers to your questions in reverse order.

2. The best suggestion I have would be to look at a couple of other scripts that are included in Deckadance. There is no one way to program something. i know for me, when i have programmed a momentary button before, the code looked a little something like this.

case 0x04:	set(PITCH_BEND_NUDGE_MINUS_A, isDown); break;


its not elegant, bit it worked.

1. as far as programming jog wheels go, there is no exact science that I have found, (Luis and Phatso, please correct me here if you have found a better way to do it). I mostly when programming jog wheels like to make it so that it feels right when I use the controller. Most jog wheels are encoder based so they will all have different values to begin with as far as rotation distance measured. for example, the settings in my Mixtrack 3 script look a bit like this.

case 0x11:  set(JOG_A, value - 64.0, 0.0001, -0.004); break;


And the dj2go script jog wheel settings look like this.

case 0x19:	set(JOG_A, value - 64.0, -0.0001, 0.01); break;


Granted, if I remember correctly, the dj2go script jog wheels are all messed up.


I hope I have helped point you in the right direction as far as looking at how to do this.
Guest Script Writer (IE, I do not work for Stanton, Gibson, or any of their associated brands, nor do I work any other companies who are in the industry. This also means I do not get any compensation for the scripts I write. All scripts that are written by me and all help given by me is to be acknowledged as one user helping another.)
Author of the Numark DJ2GO script for Deckadance (included in 2.72)
Author of the Numark Orbit script for Deckadance (included in 2.72)
Author of the updated version of the script for the M-Audio Xponent (included in 2.72)
Author of the Akai APK Mini script for Deckadance (included in 2.72)
Author of the Numark Mixtrack 3 script for Deckadance (included in 2.72)
Deckadance user since 2014
FL Studio user since 2013
0

#76 User is offline   Matt2323 

  • Newbie
  • Group: Members
  • Posts: 2
  • Joined: 12-November 17

Posted 28 November 2017 - 02:46 PM

View PostTheMoroney, on 20 November 2017 - 06:41 PM, said:

The answers to your questions in reverse order.

2. The best suggestion I have would be to look at a couple of other scripts that are included in Deckadance. There is no one way to program something. i know for me, when i have programmed a momentary button before, the code looked a little something like this.

case 0x04:	set(PITCH_BEND_NUDGE_MINUS_A, isDown); break;


its not elegant, bit it worked.

1. as far as programming jog wheels go, there is no exact science that I have found, (Luis and Phatso, please correct me here if you have found a better way to do it). I mostly when programming jog wheels like to make it so that it feels right when I use the controller. Most jog wheels are encoder based so they will all have different values to begin with as far as rotation distance measured. for example, the settings in my Mixtrack 3 script look a bit like this.

case 0x11:  set(JOG_A, value - 64.0, 0.0001, -0.004); break;


And the dj2go script jog wheel settings look like this.

case 0x19:	set(JOG_A, value - 64.0, -0.0001, 0.01); break;


Granted, if I remember correctly, the dj2go script jog wheels are all messed up.


I hope I have helped point you in the right direction as far as looking at how to do this.


Hi, thank you so much TheMonorey for your reply!!! What I tried is to use Midi learn functions and export the file in order to apply your script advices by modifying the exported file. But the exported file is in .c and the only accepted format is xml when importing the script, so I didn't manage to import. I don't know if this was a logical way to do so.
Well i'm not a programmer, I find it very interesting honestly (I work with programmers) but I unfortunalely have very fiew time to spend on it and my first wish is to play music.
I tried to send back one of the controller (VTT-101, as it is the last which I bought) to the seller as I wanted something directly compatible with the new version of deckadance, but the seller tells me to contact the sofware support :rolleyes: ](*,)

Luis would you have any script dating from 2.5 version (which was comptabible with my hardwares) that could be imported in the last version of Deckadance? My controllers are DJ-Tech VTT-101 and CDJ-101 (which are small but good hardwares) I bought it recently and I bought also Deckadance DVS Edition, I thought there were still compatible. Thank you so much for your help!!!
0

#77 User is offline   pagnix 

  • Newbie
  • Group: All Access
  • Posts: 7
  • Joined: 02-December 17

Posted 27 December 2017 - 01:27 PM

HI I'm more VJ than DJ and owned CDJ-101 for a while.. (I know it's 7 years old but works)
As DD came with it I got another and the DJM-101 as I was asked to do some DJ'ing.
I thought they would continue to be compatible.

Has anyone done the scripts for them DJ-tech CDJ-101 and DJM-101 ?

I may try myself at some point but really busy with Quartz Composer and other work :(
0

#78 User is offline   Luis Serrano 

  • Moderator
  • Group: Gibson Pro Audio
  • Posts: 630
  • Joined: 30-April 15

Posted 27 December 2017 - 01:50 PM

Scripts for the CDJ-101 and DJM-101 are in my TODO list. Like father of these controllers I feel a little bit responsable for them.
0

#79 User is offline   pagnix 

  • Newbie
  • Group: All Access
  • Posts: 7
  • Joined: 02-December 17

Posted 27 December 2017 - 02:20 PM

View PostLuis Serrano, on 27 December 2017 - 01:50 PM, said:

Scripts for the CDJ-101 and DJM-101 are in my TODO list. Like father of these controllers I feel a little bit responsable for them.



They're nice and solid... I use mine with Resolume arena but different jobs need
different tools. Like the Korg Nano controllers. I was asked to do some quartz
composer patches for serato and Mix Emergency. So have a feeling I'll be asking
questions elsewhere in the forum for DD when that gets to my TODO list so know how you
feel. Got asked to learn Python last week too LoL

This post has been edited by pagnix: 27 December 2017 - 02:21 PM

0

#80 User is offline   pagnix 

  • Newbie
  • Group: All Access
  • Posts: 7
  • Joined: 02-December 17

Posted 29 December 2017 - 02:26 PM

View PostLuis Serrano, on 27 December 2017 - 01:50 PM, said:

Scripts for the CDJ-101 and DJM-101 are in my TODO list. Like father of these controllers I feel a little bit responsable for them.



Just ran this off on the midi learn.. Midi channels 1-4 and playlist selection on all 4 decks and load...
pitch slider not working and no loopback

DJ Tech CDJ-101

Attached File(s)


0

Share this topic:


  • (5 Pages)
  • +
  • « First
  • 2
  • 3
  • 4
  • 5
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users