SirBlackmore Posted January 8, 2016 Share Posted January 8, 2016 Hi everybody, I bought recently an ES-335 2015 model, and because it needed some adjustment, I got a 5/16" truss rod key, which was supposed to fit the 335, but it seems to be a bit smaller than the truss rod. So my question is, does anybody know which size would be appropiate for a Memphis ES-335 2015? Thanks a lot. Link to comment Share on other sites More sharing options...
capmaster Posted January 8, 2016 Share Posted January 8, 2016 Hello Sir, and welcome to this nice place. It should be a 5/16" nut indeed. A thight fit is common, and some deposit of finish on the nut makes it even tighter. Carefully wiggling the key onto the nut may help. All of my Gibsons needed that when I layed hands on the truss-rod nut for the first time. And it will take care to remove the key after, too. Hope this helps. By the way, pics of your new guitar would be fine Link to comment Share on other sites More sharing options...
SirBlackmore Posted January 20, 2016 Author Share Posted January 20, 2016 Thank you very much capmaster, now I know I got the right key! ;) Link to comment Share on other sites More sharing options...
SirBlackmore Posted January 20, 2016 Author Share Posted January 20, 2016 And here's the picture Link to comment Share on other sites More sharing options...
kaicho8888 Posted February 12, 2016 Share Posted February 12, 2016 Most truss rod brass nuts have nitro residue that you need to scrape off. I even got one that had the nut filed on one side to fit under the truss rod cover! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.