Arc Anjil Posted November 5, 2016 Share Posted November 5, 2016 Anyone know where to get replacement parts for epi LP's? Specifically a pickup toggle switch, and not one you have to sand out the hole to fit a Switchcraft in. Link to comment Share on other sites More sharing options...
Little Jerry Posted November 5, 2016 Share Posted November 5, 2016 I believe that you are looking for metric sized replacement parts. You will probably find a few sellers on everyone's favorite auction site. You can probably call Epiphone/Gibson customer service and buy directly from them. You will need to verify that the products below work for your guitar, but here's two links that I found with a quick internet search: http://www.ebay.com/itm/NEW-3-Position-Toggle-Switch-for-Epiphone-Les-Paul-Guitars-Chrome-White-Tip/141959523621?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D39823%26meid%3Df2040b8bfd3b4e178a0165a3ca72fd47%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D361534614837 http://www.stewmac.com/Pickups_and_Electronics/Components_and_Parts/Switches/Metric_Toggle_Switch.html As you are considering these parts, I suggest that you also consider upgrading to American made components when the need arises to change out parts on your Epi LP. Although the American parts cost a few more dollars and require the holes to be enlarged in the body of the guitar, I think you'll find the American parts to be of a much higher quality and durability. Good luck! Link to comment Share on other sites More sharing options...
brad1 Posted November 5, 2016 Share Posted November 5, 2016 Anyone know where to get replacement parts for epi LP's? Specifically a pickup toggle switch, and not one you have to sand out the hole to fit a Switchcraft in. Epiphone does not sell replacement parts directly. You can find 3rd parties on Ebay and elsewhere. I have. If you call Epiphone they will tell you the same. Switchcraft makes switches that fit Epis. I have installed several. Link to comment Share on other sites More sharing options...
GILLMAN ROYCE Posted September 11, 2017 Share Posted September 11, 2017 I believe that you are looking for metric sized replacement parts. You will probably find a few sellers on everyone's favorite auction site. You can probably call Epiphone/Gibson customer service and buy directly from them. You will need to verify that the products below work for your guitar, but here's two links that I found with a quick internet search: http://www.ebay.com/itm/NEW-3-Position-Toggle-Switch-for-Epiphone-Les-Paul-Guitars-Chrome-White-Tip/141959523621?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D39823%26meid%3Df2040b8bfd3b4e178a0165a3ca72fd47%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D361534614837 http://www.stewmac.com/Pickups_and_Electronics/Components_and_Parts/Switches/Metric_Toggle_Switch.html As you are considering these parts, I suggest that you also consider upgrading to American made components when the need arises to change out parts on your Epi LP. Although the American parts cost a few more dollars and require the holes to be enlarged in the body of the guitar, I think you'll find the American parts to be of a much higher quality and durability. Good luck! True about U.S> made parts but Gibson/Epi won't sell you any parts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.