Gibson Guitar Board: UPDATED NUMARK ORBIT SCRIPT - Gibson Guitar Board

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic


#1 User is offline   TheMoroney 

  • Member
  • Group: Members
  • Posts: 60
  • Joined: 14-May 15
  • LocationUSA

Posted 02 February 2017 - 09:39 PM

So I have been going through and redoing a lot of my previously written scripts to make them better. Well, here is a new script for the orbit that is better designed. No more having to load Numark color files. All of the colors are now hard coded into the script. To install follow the instructions below.

1. Download Script from link on this page
2. Navigate to C:\Program Files (x86)\Stanton\Deckadance 2\script_files\Numark in file explorer.
3. Open your downloads folder in a new file explorer window.
4. Copy script from downloads folder to C:\Program Files (x86)\Stanton\Deckadance 2\script_files\Numark.
5. Plug controller in to computer.
6. Open Deckadance.
7. Open Deckadance settings.
8. Select Midi Control.
9. For control surface select Numark Orbit.
10. Select appropriate inputs and out puts
11. Done

The Accelerometers on channels 2 and 3 are set up to control Effector x and y parameters.

I hope to post mapping flies soon but the upload quota is too small.

Attached File(s)

Author of the Numark DJ2GO script for Deckadance
Author of the Numark Orbit script for Deckadance
Author of the updated version of the script for the M-Audio Xponent
Deckadance user since 2014
FL Studio user since 2013
The Unofficial Numark and M-Audio Script writing person.

Share this topic:

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users