wolfman2020 Posted February 11, 2017 Share Posted February 11, 2017 Can Someone tell me the best was to hook these up please... Thanks WM I have a set of Tarback pickups with the two separate leads, one lead has 15.75 ohms the other 7.54 ohms. The pickups have a number stamped on the black epoxy that looks like a Tim shaw number. one has 409 681 he other 410 681. I have tim shaw PAFs in a 1985 custom shop les paul and the pickups sound great. they read both around 7.75 ohms. I want to get as close to that PAF sound out of these with the dual leads. I am putting them in a 1976 Gibson LE Explorer and I could use some help on which lead to use, and if possible could someone explain if the higher reading is both coils and the lower just one of the coils or vise versa. or do I use both leads and tie the two inner wires together and the outer ground shielding together. I'm Lost. Here is a Link to the exact pickups on ebay where I got them. Thanks in advance DT http://www.ebay.com/itm/262841722093?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT << link to pics Link to comment Share on other sites More sharing options...
wolfman2020 Posted February 12, 2017 Author Share Posted February 12, 2017 here the pickup Link to comment Share on other sites More sharing options...
wolfman2020 Posted February 12, 2017 Author Share Posted February 12, 2017 I attached a picture of the back of the pickup. any help hooking it up would be appreciated, I don't want to use it coil tapped. one lead reads 15.75 ohms the other 7.65 ohms which one do i use Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.