fdo1951 Posted May 2, 2017 Share Posted May 2, 2017 What kind of Bigsby can l install on my Epiphone Sheraton whitout make other holes? Thanks a lot Filippo Link to comment Share on other sites More sharing options...
kidblast Posted May 2, 2017 Share Posted May 2, 2017 you would want to look at the Vibramate adapter with the Bigsby. this link will show you the chart for compatible adapters: http://www.vibramate.com/vibramate-model-chart.php so for a sherry, this is the vibramate adapter: http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by_Instrument/Archtop_Guitar_Parts/Archtop_Guitar_Bridges_and_Tailpieces/Vibramate_V5_Adapter_for_Bigsby_B5.html and this would be the corresponding bisgby to go with the V5 adapter. http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by_Instrument/Archtop_Guitar_Parts/Archtop_Guitar_Bridges_and_Tailpieces/Bigsby_B5_Vibrato.html or this: (if you can find one Gold plated) is probably ideal as it would make a better fit for break angle to the bridge. http://www.vibramate.com/vibramate-v7-335-install.php Link to comment Share on other sites More sharing options...
fdo1951 Posted May 2, 2017 Author Share Posted May 2, 2017 thank you very much! Link to comment Share on other sites More sharing options...
charlie brown Posted May 2, 2017 Share Posted May 2, 2017 The B-5 above, is (usually) used on Solid Body guitars...SG's, "Slab body" Les Paul's, etc. The B-7 is more common, on Thinline Archtops (Like the Sheraton). There is a Vibramate system, for the B-7, and other Bigsby's as well. http://www.vibramate.com/vibramate-v7-335-install.php Good Luck, with your "mod!" CB Link to comment Share on other sites More sharing options...
gnappi Posted May 2, 2017 Share Posted May 2, 2017 The B-5 above, is (usually) used on Solid Body guitars...SG's, "Slab body" Les Paul's, etc. The B-7 is more common, on Thinline Archtops (Like the Sheraton). There is a Vibramate system, for the B-7, and other Bigsby's as well. http://www.vibramate...335-install.php Good Luck, with your "mod!" CB A B6 doesn't leave holes in the top so it's sell able to bigsby lovers, and those that do not like a trem can take it off. Drill a hole and only a bigsby fan will buy it. With a B6 you can't suspend the git by the arm and bop the body up and down on its own weight, but only serious trem addicts do that :-) Link to comment Share on other sites More sharing options...
kidblast Posted May 2, 2017 Share Posted May 2, 2017 The B-5 above, is (usually) used on Solid Body guitars...SG's, "Slab body" Les Paul's, etc. The B-7 is more common, on Thinline Archtops (Like the Sheraton). There is a Vibramate system, for the B-7, and other Bigsby's as well. http://www.vibramate.com/vibramate-v7-335-install.php Good Luck, with your "mod!" CB Hey CB! Actually the solid block where the unit is installed is probably why Vibramate suggests the V5 for the Sheraton as ONE option. Of course, if you go the Vibramte route, you change nothing, just remove to stop bar. The v7-335 / B7 (http://www.vibramate.com/vibramate-v7-335-install.php) combo I think would in fact be better as it would put the string termination down closer to the bottom of the body, and thus make a more reasonable brake angle over the bridge. the gold gold plated variant which one would want for a sherry.. is +$30.. (I'm tempted..) Link to comment Share on other sites More sharing options...
Dennis G Posted May 2, 2017 Share Posted May 2, 2017 No help with your question, but I put a B7 on my Elitist Casino: Two things, however: 1. This was NOT my first guitar with a Bigsby 2. I knew I'd never sell this guitar, I like it too much Other than that, have at it Link to comment Share on other sites More sharing options...
charlie brown Posted May 2, 2017 Share Posted May 2, 2017 A B6 doesn't leave holes in the top so it's sell able to bigsby lovers, and those that do not like a trem can take it off. Drill a hole and only a bigsby fan will buy it. With a B6 you can't suspend the git by the arm and bop the body up and down on its own weight, but only serious trem addicts do that :-) The B-7 w/Vibramate doesn't require any holes to be drilled. The longer plate, under the B-7 allows for the "anchor" screw. But, the B-6 is a good option, too, should he want to go that route. I just think the B-7 is a bit more stable, less side to side movement. But (maybe?) that's just Me? CB Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.