Gibson Brands Forums: SG Stamped Truss Rod Covers - Gibson Brands Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

SG Stamped Truss Rod Covers SG Std. Basses

#1 User is offline   gsgbass 

  • Advanced Member
  • Group: All Access
  • Posts: 5185
  • Joined: 04-October 10

Posted 06 December 2017 - 07:39 AM

Is there anyway to acquire SG Stamped Truss Rod Covers, for the SG Std. Basses from Gibson? Why was the production of the SG Stamped Truss Rod Covers stopped? It just looks bit classy on a $1300.00 Gibson. You sure pander enough to Les Paul guitars, for parts.
0

#2 User is offline   gearhead 

  • Advanced Member
  • Group: All Access
  • Posts: 696
  • Joined: 29-December 09
  • LocationDallas, Texas

Posted 08 December 2017 - 12:54 PM

If nothing else buy a 2 ply cover and have it engraved. I would guess Gibson might be the only source, you could get an SG guitar truss rod cover for it.
I THINK they are the same size, but you may want to be sure.
I would email Gibson and see what they say.

This post has been edited by gearhead: 08 December 2017 - 12:55 PM

_______________________________________________________________________________
*****************************************************************************************************************
1937 Gibson L50 "Black Special #4"
1978 Gibson Melody Maker D
1996 Epiphone Special II
2002 Epiphone Junior
2003 Epiphone EB0
2007 Epiphone G400 (Gibson 490R & 498T)
2009 Epiphone Junior
2010 Jay Turser JT-200 Pro (SD Invader)
2010 Jay Turser JT-220 (Mighty Mites)
2004 Ibanez SZ720FM (SD- Detonators)
Marshall AVT50H

Marshall AVT150H
Crate BV60H
Line 6 Flextone III
0

#3 User is offline   70Falcon 

  • Newbie
  • Group: All Access
  • Posts: 9
  • Joined: 23-October 17
  • LocationForney, Texas U.S.A.

Posted 08 December 2017 - 01:49 PM

View Postgsgbass, on 06 December 2017 - 07:39 AM, said:

Is there anyway to acquire SG Stamped Truss Rod Covers, for the SG Std. Basses from Gibson? Why was the production of the SG Stamped Truss Rod Covers stopped? It just looks bit classy on a $1300.00 Gibson. You sure pander enough to Les Paul guitars, for parts.


Would an Epiphone SG truss rod cover like the one in the link fit?

http://www.ebay.com/...ke/132416335277

Here's another, but a bit pricey:

http://www.ebay.com/...ke/162785708131

This post has been edited by 70Falcon: 08 December 2017 - 01:50 PM

Otto...
0

#4 User is offline   gearhead 

  • Advanced Member
  • Group: All Access
  • Posts: 696
  • Joined: 29-December 09
  • LocationDallas, Texas

Posted 08 December 2017 - 01:54 PM

Those are different than the Gibson cover. Gibson has 2 screw holes, and the lower screw has a little "tab" that the screw goes through
and the bottom is not flat like the Epi cover.
Attached File  Screenshot_1.jpg (17.18K)
Number of downloads: 11
_______________________________________________________________________________
*****************************************************************************************************************
1937 Gibson L50 "Black Special #4"
1978 Gibson Melody Maker D
1996 Epiphone Special II
2002 Epiphone Junior
2003 Epiphone EB0
2007 Epiphone G400 (Gibson 490R & 498T)
2009 Epiphone Junior
2010 Jay Turser JT-200 Pro (SD Invader)
2010 Jay Turser JT-220 (Mighty Mites)
2004 Ibanez SZ720FM (SD- Detonators)
Marshall AVT50H

Marshall AVT150H
Crate BV60H
Line 6 Flextone III
1

#5 User is offline   70Falcon 

  • Newbie
  • Group: All Access
  • Posts: 9
  • Joined: 23-October 17
  • LocationForney, Texas U.S.A.

Posted 08 December 2017 - 02:58 PM

View Postgearhead, on 08 December 2017 - 01:54 PM, said:

Those are different than the Gibson cover. Gibson has 2 screw holes, and the lower screw has a little "tab" that the screw goes through
and the bottom is not flat like the Epi cover.
Attachment Screenshot_1.jpg


Are the covers different on a 6 string compared to the Bass? Being new to all of this, I had no idea of the differences. Seemed that they were using 3 screws on the guitars I saw being manufactured when I toured the Memphis factory. Of course they don't make SG's there.
Otto...
1

#6 User is offline   gearhead 

  • Advanced Member
  • Group: All Access
  • Posts: 696
  • Joined: 29-December 09
  • LocationDallas, Texas

Posted 08 December 2017 - 06:52 PM

All of the Gibson's I have ever owned had 2 screws.
Here is the cover on my 1978 Melody maker.
It's 2 3/8 inches tall and 1 1/8 inch wide at the bottom of the bell.
Attached File  IMG_20171208_184539 (Medium).jpg (113.59K)
Number of downloads: 6

This post has been edited by gearhead: 08 December 2017 - 06:53 PM

_______________________________________________________________________________
*****************************************************************************************************************
1937 Gibson L50 "Black Special #4"
1978 Gibson Melody Maker D
1996 Epiphone Special II
2002 Epiphone Junior
2003 Epiphone EB0
2007 Epiphone G400 (Gibson 490R & 498T)
2009 Epiphone Junior
2010 Jay Turser JT-200 Pro (SD Invader)
2010 Jay Turser JT-220 (Mighty Mites)
2004 Ibanez SZ720FM (SD- Detonators)
Marshall AVT50H

Marshall AVT150H
Crate BV60H
Line 6 Flextone III
1

#7 User is offline   gsgbass 

  • Advanced Member
  • Group: All Access
  • Posts: 5185
  • Joined: 04-October 10

Posted 10 December 2017 - 07:49 PM

The Epi SG has three mounting screws, and the Gibson SG has two.
0

#8 User is offline   gsgbass 

  • Advanced Member
  • Group: All Access
  • Posts: 5185
  • Joined: 04-October 10

Posted 10 December 2017 - 07:55 PM

View Postgearhead, on 08 December 2017 - 12:54 PM, said:

If nothing else buy a 2 ply cover and have it engraved. I would guess Gibson might be the only source, you could get an SG guitar truss rod cover for it.
I THINK they are the same size, but you may want to be sure.
I would email Gibson and see what they say.


The original SG cover is a 2 ply. White bottom, Black top. because then, I think they just etched, or laser cut out the SG lettering through the top black coat.

Posted Image
0

#9 User is offline   Revolution Six 

  • Only a Gibson !
  • Group: All Access
  • Posts: 585
  • Joined: 07-December 16

Posted 11 December 2017 - 02:46 AM

View Post70Falcon, on 08 December 2017 - 01:49 PM, said:

Would an Epiphone SG truss rod cover like the one in the link fit?

http://www.ebay.com/...ke/132416335277

Here's another, but a bit pricey:

http://www.ebay.com/...ke/162785708131


[biggrin] [biggrin] [biggrin] [biggrin] [biggrin] [biggrin]

Thank you for this joke, I' m dead ! [biggrin]
Posted Image
0

#10 User is offline   gsgbass 

  • Advanced Member
  • Group: All Access
  • Posts: 5185
  • Joined: 04-October 10

Posted 12 December 2017 - 03:41 PM

View PostRevolution Six, on 11 December 2017 - 02:46 AM, said:

[biggrin] [biggrin] [biggrin] [biggrin] [biggrin] [biggrin]

Thank you for this joke, I' m dead ! [biggrin]


I'm at a loss myself.
0

#11 User is offline   gearhead 

  • Advanced Member
  • Group: All Access
  • Posts: 696
  • Joined: 29-December 09
  • LocationDallas, Texas

Posted 19 December 2017 - 08:07 AM

Here is the Gibson part number for an SG Standard truss rod cover.


430-19489

This post has been edited by gearhead: 19 December 2017 - 08:08 AM

_______________________________________________________________________________
*****************************************************************************************************************
1937 Gibson L50 "Black Special #4"
1978 Gibson Melody Maker D
1996 Epiphone Special II
2002 Epiphone Junior
2003 Epiphone EB0
2007 Epiphone G400 (Gibson 490R & 498T)
2009 Epiphone Junior
2010 Jay Turser JT-200 Pro (SD Invader)
2010 Jay Turser JT-220 (Mighty Mites)
2004 Ibanez SZ720FM (SD- Detonators)
Marshall AVT50H

Marshall AVT150H
Crate BV60H
Line 6 Flextone III
0

#12 User is offline   FZ Fan 

  • Jumbo Go Away
  • Group: All Access
  • Posts: 6844
  • Joined: 15-October 13
  • LocationVirginia

Posted 19 January 2018 - 08:52 AM

View Postgearhead, on 19 December 2017 - 08:07 AM, said:

Here is the Gibson part number for an SG Standard truss rod cover.


430-19489


Get ahold of the guy in the post below.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users