Gibson Brands Forums: Explorers, DIY, BYO Epiphone Style - Gibson Brands Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Explorers, DIY, BYO Epiphone Style

#1 User is offline   mihcmac 

  • Advanced Member
  • Group: All Access
  • Posts: 100
  • Joined: 13-December 17
  • LocationHawaii

Posted 22 January 2018 - 05:14 PM

This is my Epiphone based DIY Custom African Mahogany Explorer with P-90's that I built.. Lots and lots and lots of lacquer. :blink:

I replaced the pickups and wiring harness that were labeled Epiphone and used a roller bridge. I also put in 500k pots..So I replaced most of the hardware The tuners felt good so I kept them.

The Explorer kit came routed out for humbuckers so I used Humbucker sized P-90's.

It was a lot of fun to build, even with all my screw-ups it still came out , the neck is fantastic and sounds really great!

I'm interested if anyone is willing to show their Epiphone style BYO or DIY builds....

Attached File(s)


This post has been edited by mihcmac: 23 January 2018 - 11:30 AM

P-90's Rule.... Posted Image
1

#2 User is offline   brad1 

  • Resident Tin Whacker
  • Group: All Access
  • Posts: 5129
  • Joined: 23-January 08
  • LocationNorthern California

Posted 23 January 2018 - 09:21 PM

Looks very nice 👍🏼
Great job!
Life's Distractions/Pleasures:
Guitars: 2006 Epiphone Ebony G400, 1997 Epiphone Cherry SG Junior, 2007 Epiphone Cherry Dot, 1996 Fender Black MIM Traditional Stratocaster, 2008 VM Squier Olympic White SSH Telecaster, 2011 Jackson Gun Metal Gray JS32R Dinky (FR), 2014 Gibson Fireburst Satin SGJ, 2014 Epiphone Wildkat, 2015 Xaviere XV-500 Trans. Green, 2015 Red Flamed G&L Ascari GTS, 2016 Lake Placid Blue Fender Standard Telecaster, 2016 Gibson T LP Studio Faded Fireburst, 1985 George Washburn Dreadnought, 2014 Washburn WD10 SCE Acoustic/Electric, 2005 Ibanez Trans-Blue Burst GSR200 FM Bass
Amps:
VOX AD30VT, Fender Super Champ XD, Orange Micro Terror, Peavey ValveKing II MicroHead , Quilter Toneblock 200, Hughes & Kettner Tubmeister 18 Head, Marshall DSL 15H, Bugera Infinium V22, Acoustic B100 Bass Combo, Cabs: Peavey 112, Hughs & Kettner TM110, Orange PPC108

Drums: 1977 Ludwig 5 Piece Butcher Block, 2015 Roland TD- 1KV.

My Music ----> http://soundcloud.com/bradley-e
0

#3 User is offline   Jeffytune 

  • Advanced Member
  • Group: All Access
  • Posts: 119
  • Joined: 15-November 17

Posted 24 January 2018 - 10:40 AM

So.....is this a kit guitar or did you buy an Epi and rebuild it?
0

#4 User is offline   mihcmac 

  • Advanced Member
  • Group: All Access
  • Posts: 100
  • Joined: 13-December 17
  • LocationHawaii

Posted 24 January 2018 - 12:54 PM

It was a kit that had Epiphone hardware. After examining how the body and neck were shaped it looked more like an Epiphone than a Gibson. Gluing the neck in place was scary because if I didn't do it right the Explorer would have been toast. I was very anxious to start the finishing process.

There are a lot of different guitar kits out there. The ones with set necks are the most difficult. The bolt-on neck kits are easier because you can work on the neck and body separately. Like two separate projects.

This post has been edited by mihcmac: 24 January 2018 - 01:15 PM

P-90's Rule.... Posted Image
0

#5 User is offline   vomer 

  • Advanced Member
  • Group: All Access
  • Posts: 1647
  • Joined: 07-April 08
  • LocationSomerset, UK.

Posted 24 January 2018 - 03:43 PM

Very nice. What did you finish it with?
Paul.


"Aunt Florrie's credenda, all musicians are nice people..."

Posted Image



Epi gear:

1973 EA250.
2004 Sheraton II with TonePros bridge, Bare Knuckle Mississippi Queen, and TV Jones T-90 at the bridge.
PR-200 acoustic.
Valve Junior with mods by Alnicomagnet, Power Scaling, and Celestion Eight 15.
0

#6 User is offline   mihcmac 

  • Advanced Member
  • Group: All Access
  • Posts: 100
  • Joined: 13-December 17
  • LocationHawaii

Posted 24 January 2018 - 05:37 PM

Lots and lots of lacquer. Not something I would want to do again with my environment for painting.. I think I got severe brain damage..

[scared]


The trick finish is "Nitro" like Gibson uses, or Resin is faster which is what Epiphone uses I think..

The basic process is sand it, stain it, sand it, seal it, sand it, finish, sanding in between coats, then sand sand sand and polish out..

This post has been edited by mihcmac: 25 January 2018 - 04:25 PM

P-90's Rule.... Posted Image
1

#7 User is offline   mihcmac 

  • Advanced Member
  • Group: All Access
  • Posts: 100
  • Joined: 13-December 17
  • LocationHawaii

Posted 25 January 2018 - 04:41 PM

Explorers are very fun to play, they are very long guitars but extremely well balanced. Gibson released them in 1958 and took a big dive on them. Not realizing they had designed one of the greatest future shock guitars that everyone and their brother would copy, due to lapse in Gibsons judgment and patent. Any Explorer, that follows the Gibson design closely, that is well made no matter who makes it, holds its value, it is truly an iconic design.

I have recently added a Duesenberg Trem II Tremolo to mine, it requires no mods to the guitar just takes the place of the stop bar.

This post has been edited by mihcmac: 26 January 2018 - 12:33 PM

P-90's Rule.... Posted Image
0

#8 User is offline   vomer 

  • Advanced Member
  • Group: All Access
  • Posts: 1647
  • Joined: 07-April 08
  • LocationSomerset, UK.

Posted 25 January 2018 - 07:34 PM

I asked about the finish as I'm considering trying to do it myself. I have a USACG strat at the moment which is going to go to a finisher because I'm not set up for it yet. Kudos for doing it, I had heard it's a lot of work. Looks like it came out well.

And I do like Explorers, they appeal to the Glam rocker in me, having been an early fan of Sweet and Slade and the like, but now that I'm an old blues noodler I can't really justify one.
Paul.


"Aunt Florrie's credenda, all musicians are nice people..."

Posted Image



Epi gear:

1973 EA250.
2004 Sheraton II with TonePros bridge, Bare Knuckle Mississippi Queen, and TV Jones T-90 at the bridge.
PR-200 acoustic.
Valve Junior with mods by Alnicomagnet, Power Scaling, and Celestion Eight 15.
0

#9 User is offline   mihcmac 

  • Advanced Member
  • Group: All Access
  • Posts: 100
  • Joined: 13-December 17
  • LocationHawaii

Posted 26 January 2018 - 01:26 PM

These finishes are all very toxic and a well ventilated spray booth is the best. In addition you need a respirator. Way more toxic than using spay enamel which will not setup into a hard finish like lacquers.

Lacquer dries really fast but requires lots of coats to achieve a finish thick enough to be sanded smooth and rubbed out.

Nitrocellulose lacquer also dries very quickly and builds up a very hard thick finish faster than lacquer. But with age you may see the spider web cracking that you see typically on old Gibsons.

Polyurethane builds up nice finish quickly and sets up in a few hours in between coats. But takes much longer to cure into a hard finish.

I used lacquer in a covered wide open space that had a mild consistent breeze, I was always up wind of my guitar, but that was not enough even applying very quick thin coats. I had to get a respirator.

It would be easier to finish a bolt on style body that you can lay down flat to get a good flood coats. :rolleyes:

This post has been edited by mihcmac: 26 January 2018 - 03:47 PM

P-90's Rule.... Posted Image
0

#10 User is offline   crust 

  • Epiphone Enthusiast
  • Group: All Access
  • Posts: 4283
  • Joined: 23-May 09
  • LocationBrockton, Massachusetts

Posted 02 February 2018 - 05:39 PM

that thing does appear to be most excellent , to me :) yes , that is what I do think about that :) hey where did you obtain the kit ? I hope you do not mind me asking that :) nice indeed :) peace :) Posted Image
0

#11 User is offline   mihcmac 

  • Advanced Member
  • Group: All Access
  • Posts: 100
  • Joined: 13-December 17
  • LocationHawaii

Posted 03 February 2018 - 02:19 PM

View Postcrust, on 02 February 2018 - 05:39 PM, said:

that thing does appear to be most excellent , to me :) yes , that is what I do think about that :) hey where did you obtain the kit ? I hope you do not mind me asking that :) nice indeed :) peace :) Posted Image


Mine came from BYOGUITAR at the following link. note that kits with bolton neck kits are usually a little easier to build than set necks..

http://www.byoguitar...uitar-Kits.aspx

eBay also has Lots of DIY kits..

https://www.ebay.com...ar+kit&_sacat=0




This post has been edited by mihcmac: 03 February 2018 - 02:22 PM

P-90's Rule.... Posted Image
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users