merseybeat1963 Posted February 2, 2018 Share Posted February 2, 2018 Hi guys.. I have a 1966 Gibson B45-12N 12 String Guitar with Trapeze that needs a replacement for its dark plastic adjustable Bridge. The high E has gone down where there is no clearance front and back and the last supporting wall/surround at the end has gone. So the high E strings sound is not clear especially as I go up past the 12th Fret. Is there a nice simple ready made Bone piece that can go right in to improve things? Adjustable feature ok with me. I asked Stewart McDonald and they dont have anything ?? Any of you guys replaced that on yours? Thanks Link to comment Share on other sites More sharing options...
ksdaddy Posted February 2, 2018 Share Posted February 2, 2018 I bought one on ebay a month ago. I see they're out of stock now, but I would assume they will get some in at some point or maybe someone else has them. Very good replacement. Made in Japan. You will have to notch it to your liking but that's easy enough. The ebay seller I bought this one from is named allsoundstore. Link to comment Share on other sites More sharing options...
aliasphobias Posted February 2, 2018 Share Posted February 2, 2018 I know Philadelphia Luthier Supply carries the Tusq version but they are hit and miss with bone. Worth a try!? Good luck! Link to comment Share on other sites More sharing options...
merseybeat1963 Posted February 8, 2018 Author Share Posted February 8, 2018 I know Philadelphia Luthier Supply carries the Tusq version but they are hit and miss with bone. Worth a try!? Good luck! Thanks. Does a Bone version even exist? Link to comment Share on other sites More sharing options...
merseybeat1963 Posted February 8, 2018 Author Share Posted February 8, 2018 The Adjustable Saddle on the 1966 B45-12N is the same as the ones in the J-160..yes? Thanks Link to comment Share on other sites More sharing options...
merseybeat1963 Posted February 8, 2018 Author Share Posted February 8, 2018 I just ordered it..thanks again : ) Link to comment Share on other sites More sharing options...
merseybeat1963 Posted February 13, 2018 Author Share Posted February 13, 2018 Got it..now how does one install it ? Any advise..thanks Link to comment Share on other sites More sharing options...
aliasphobias Posted February 13, 2018 Share Posted February 13, 2018 Remove old, a few turns each side, alternately. Using calipers or a crescent wrench as a go/no go gauge sand to thickness and reinstall. Btw I would not notch the saddle, only asking for increased tuning problems. The strings will create there own mini notches in short order. You're welcome to message me back channel if more specific or detailed info is required. Link to comment Share on other sites More sharing options...
merseybeat1963 Posted February 15, 2018 Author Share Posted February 15, 2018 Remove old, a few turns each side, alternately. Using calipers or a crescent wrench as a go/no go gauge sand to thickness and reinstall. Btw I would not notch the saddle, only asking for increased tuning problems. The strings will create there own mini notches in short order. You're welcome to message me back channel if more specific or detailed info is required. Hi Allas..Thank you. So to get old one out is just a matter of unscrewing the two Flatheads on each end..yes? Unscrewing all the way or just retracting them? Many Thanks Nick Link to comment Share on other sites More sharing options...
aliasphobias Posted February 15, 2018 Share Posted February 15, 2018 No harm in taking them out all of the way. If the saddle frees enough for removal before them just as good. Link to comment Share on other sites More sharing options...
j45nick Posted February 15, 2018 Share Posted February 15, 2018 Hi Allas..Thank you. So to get old one out is just a matter of unscrewing the two Flatheads on each end..yes? Unscrewing all the way or just retracting them? Many Thanks Nick The two slotted machine screws used to adjust saddle height just screw into threaded bushings let into the top of the guitar. These bushings are effectively barrel bolts shaped like an inverted top hat that are secured on the underside of the bridgeplate with fairly large nuts. You can screw the slot-head adjustment screws out without a problem. Usually, the saddle can be removed when you screw the height adjustment machine scrws out far enough that the saddle is vertically clear of the bridge. The process will be pretty obvious when you start backing out the adjustment screws. Link to comment Share on other sites More sharing options...
OldCowboy Posted February 15, 2018 Share Posted February 15, 2018 Beware the tendency to get over enthusiastic when removing/installing the new saddle - I've seen some of them that have broken off at the ends from being forced. Won't much matter with the original, but you likely want to keep the new one intact. Not a huge job - just take your time until you get the hang of it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.