sbpark Posted September 23, 2018 Share Posted September 23, 2018 Send an email to K&K but didnt get a reply. Want to order an "Acoustic Strap Secure" from StewMac, but not sure if the K&K threads are metric or standard. Thanks! https://www.stewmac.com/Hardware_and_Parts/Endpins_and_Bridge_Pins/Acoustic_Strap_Secure.html Link to comment Share on other sites More sharing options...
MissouriPicker Posted September 24, 2018 Share Posted September 24, 2018 Don't know if this helps you, but when I replaced the LR Baggs Anthem in my J100 with a K & K Pure Mini, the end pin swap was no problem. The Pure Mini slid right in, just as snug as the LR Baggs. Link to comment Share on other sites More sharing options...
sbpark Posted September 24, 2018 Author Share Posted September 24, 2018 Don't know if this helps you, but when I replaced the LR Baggs Anthem in my J100 with a K & K Pure Mini, the end pin swap was no problem. The Pure Mini slid right in, just as snug as the LR Baggs. That's not what I'm referring to. I'm looking to buy a piece that replaces the cover on the end of the end pin that StewMac sells that acts like a strap keeper/retainer, just need to know if it's metric or standard threads. Thanks though! Link to comment Share on other sites More sharing options...
sbpark Posted September 24, 2018 Author Share Posted September 24, 2018 Got a reply from K&K this morning: "We have used both. You can tell by looking at the end surface of the strapnut: if it is flat it is standard, if convex (curved) it is metric." Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.