zombiewuf Posted October 12, 2018 Share Posted October 12, 2018 hello all: This is my first post. I am attempting to wire my classic 57 humbuckers in my 2017 tradional pro. I have done a number of searchs but i always get the same diagrams which really dont tell me a lot. My emerson kit has two 500 k volumes with two push pull 500 k tones i want wire with coil split. the colors are red black white green bare, and i dont know how to wire the jack. any help would be appreciated Link to comment Share on other sites More sharing options...
DiamondJig Posted October 12, 2018 Share Posted October 12, 2018 https://www.seymourduncan.com/wiring-diagrams?meta_params=guitar-options,2-pickups,neck-h,bridge-h,2-volume,2-tone,3-way-toggle,accessory-none https://docs.google.com/gview?embedded=true&url=https%3A%2F%2Fwww.seymourduncan.com%2Fwp-content%2Fuploads%2F2016%2F05%2F2H_3G_2VppSPL_2T.pdf Link to comment Share on other sites More sharing options...
zombiewuf Posted October 12, 2018 Author Share Posted October 12, 2018 thank you i have seen this doesnt tell me a thing i am still lost Link to comment Share on other sites More sharing options...
old guy Posted October 12, 2018 Share Posted October 12, 2018 i dont know how to wire the jack. The Jack is wired like this. The ground gets grounded to the back of the pot, and the hot wire goes to the side of the toggle switch that has 1 post on it. Link to comment Share on other sites More sharing options...
zombiewuf Posted October 13, 2018 Author Share Posted October 13, 2018 The Jack is wired like this. The ground gets grounded to the back of the pot, and the hot wire goes to the side of the toggle switch that has 1 post on it. sorry i guess i am too dense but i have three wires from the switch left one bare one white one black the red is going to middle lug of bridge pot, green to middle of neck volume what am i missing here where to solder the remaining i know bare is ground to pot but where to solder white and black of the swtich and how to connect the jack Link to comment Share on other sites More sharing options...
old guy Posted October 13, 2018 Share Posted October 13, 2018 sorry i guess i am too dense but i have three wires from the switch left one bare one white one black the red is going to middle lug of bridge pot, green to middle of neck volume what am i missing here where to solder the remaining i know bare is ground to pot but where to solder white and black of the swtich and how to connect the jack are you trying to use the existing switch wires or are you running new ones? Link to comment Share on other sites More sharing options...
zombiewuf Posted October 13, 2018 Author Share Posted October 13, 2018 existing Link to comment Share on other sites More sharing options...
old guy Posted October 13, 2018 Share Posted October 13, 2018 existing ok, the black wire from the toggle switch goes to the black wire of the jack. the bare goes to ground the red wire goes to the middle lug of the bridge volume and the white wire to the neck volume middle lug. then your pickup wires should go to the lugs on the right. then the other wire coming from the jack, gets grounded to the back of the pot. Link to comment Share on other sites More sharing options...
zombiewuf Posted October 13, 2018 Author Share Posted October 13, 2018 does the black wire of the jack go the sleeve or the jack tip Link to comment Share on other sites More sharing options...
zombiewuf Posted October 13, 2018 Author Share Posted October 13, 2018 ok it is off to guitar center a beaten man i cannot figure it out...thanks for your help Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.