josephdouce Posted December 3, 2018 Share Posted December 3, 2018 I have recently bought a 2nd hand P93. I am thinking of the below modification to the wiring but am new to this so can someone tell me if there is anything wrong. I am planning to replace all 4 pots with 500k push/pull with the switches pushed in it should act as per the factory configuration The improvements I hope to make are Tone Pull will disable the tone pot completely (bright switch) Neck Pull will disable the pickup (unless someone has a better idea) Mid Pull will reverse the polarity to allow for hum cancelling Bridge Pull will disable the pickup (unless someone has a better idea) This should allow me to have a brighter sound, use only the middle pickup, currently putting it to mid and setting bridge and neck to 0 on volume means three are 3 x 500k in series to ground which causes leakage. Additionally I may change to a 5-Pos switch as I currently cant disable the Mid pickup with this configuration. Link to comment Share on other sites More sharing options...
crust Posted December 14, 2018 Share Posted December 14, 2018 So, did you do that, to that, yet ? Are you satisfied with it, like that, now ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.