Help
Browser:
Browser Knob = Playlist up/down (Blue ring LED) - Directory up/down (Green ring LED) .
Browser button = Switch betwenn Playlist and Directory.
LOAD A = Load track to deck A / Expand - Collapse (when in Directory view)
LOAD B = Load track to deck B
ASSISTANT = Automix
(IMPORTANT!!: Be sure to create an Automix playlist before using).
Decks:
Sync = Sync lock.
SHIFT + SYNC = Sync master
Cue = Cue point
SHIFT + CUE = Return to beginning of loaded song.
Play = Play/Pause.
Vinyl = Scratch On/Off (Default: ON)
SLIP = Snap
Q = Key Lock
Loop section:
Loop In = Loop In
Loop In (Long press) = Loop on/off (4 beat)
SHIFT + Loop In button = Loop Half size
Loop Out = Loop Out
SHIFT + Loop Out button = Loop Double size
FX Section :
Button 1 = FX3 on/off (Reverb)
Knob 1 = FX 3 parameter.
Knob 2 = FX Dry/Wet.
PADS - Hot Cue:
[Inpulse 300]
Pad 1-8 = Set and trigger Hot Cue 1-8.
Shift + Pad 1-8 = Delete Hot Cue 1-8.
[Inpulse 200]
Pad 1-4 = Set and trigger Hot Cue 1-4.
Shift + Pad 1-4 = Delete Hot Cue 1-4.
PADS - Roll Mode:
[Inpulse 300]
Pad 1-8 = Temporary loop ( 1/32 to 4 beat) + Leap (when you end looping playback resumes from where it would have been without looping).
[Inpulse 200]
Pad 1-4 = Temporary loop ( 1/2 to 4 beat) + Leap (when you end looping playback resumes from where it would have been without looping).
PADS - Slicer (Inpulse 300 only):
Pad 1-8 = Trigger Gross Beat Slot A1 - A8 (Gross Beat B1 - B8 on Deck B )
PADS - Sampler:
[Inpulse 300]
Pad 1-8 = Trigger Sampler 1-8 (Same for Deck B )
[Inpulse 200]
Pad 1-4 = Trigger Sampler 1-4 (Same for Deck B )
PADS - Toneplay (Inpulse 300 only):
Pad 1-8 = Trigger + 3 to -4 semi-tone cue points
PADS - FX :
NOTE: In FX mode, the pads sends multiple MIDI messages that affects various parameters in order to create "automatic effects" when pressed.
[Inpulse 300]
Pad 1 = FX2 on/off (Phaser)
Pad 2 = FX2 on/off (Distortion)
Pad 3 = FX2 on/off (Low Pass)
Pad 4 = FX2 on/off (Delay)
Pad 5 = FX2 on/off (Flanger)
Pad 6 = FX2 on/off (Low pass)
Pad 7 = Cue Point + baby scratch
Pad 8 = baby scratch
[Inpulse 200]
Pad 1 = FX2 on/off (Phaser)
Pad 2 = FX2 on/off (Distortion)
Pad 3 = FX2 on/off (Delay)
Pad 4 = baby scratch
PADS - SlicerLoop (Inpulse 300 only - NOT USED) :
PADS - Beatjump (Inpulse 300 only) :
Pad 1-4 = Beat LED Deck A
Pad 5-8 = Beat LED Deck B
Other controls as labeled.
--------------------------------------------------------------------------------
Attached File(s)
-
DD2_Hercules_DJC_Inpulse300_v273.zip (4.93K)
Number of downloads: 0 -
DD2_Hercules_DJC_Inpulse200_v273.zip (3.39K)
Number of downloads: 0
