Gibson Guitar Board: Help to find tremolo Bigsby like.... - Gibson Guitar Board

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Help to find tremolo Bigsby like....

#1 User is offline   CrackLevent 

  • Member
  • Group: Members
  • Posts: 19
  • Joined: 29-April 09

Posted 06 June 2009 - 01:40 AM

Hi Guys,

Iam looking for a tremolo just like Bigsby B5, but not from Bigsby.

Maybe you can help me i would appreciate it a lot.

Best option ever would be, if you could tell me where i can buy a vintage Gibson tremolo.

I need it for my Gibson SG Deluxe 1972


Posted Image

If you look carefully, a bigsby wouldnt fix on it, the holes are too differend.

THX


#2 User is offline   ZIPPER 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 30-December 09

Posted 30 December 2009 - 02:28 AM

HI. I HAVE A OLD 1970-72 BIGSBY THAT SAYS GIBSON. SCREW PAT. LOOK LIKE SQUARE. WILL FIT YOUR GUITAR. EME AT ZIP69@LIVE.COM. MY WORK http://jasondelucia.com/guitars.htm

#3 User is offline   ZIPPER 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 30-December 09

Posted 01 January 2010 - 03:16 AM

[img][/img]http://www.facebook.com/photo.php?pid=30402973&id=1265663669#/photo.php?pid=30402973&id=1265663669&fbid=1178347099928

#4 User is offline   Sigournius 

  • Member
  • Group: Members
  • Posts: 22
  • Joined: 04-January 10

Posted 04 January 2010 - 02:44 PM

on my mid seventies Gibson Bixby the holes have the opposite spacing
narrow near the edge and wider toward the bridge
1.5" bottom spacing 2.75" bridge

#5 User is offline   dickey 

  • Advanced Member
  • Group: Members
  • Posts: 217
  • Joined: 25-August 08

Posted 04 January 2010 - 08:25 PM

Quote

on my mid seventies Gibson Bixby the holes have the opposite spacing
narrow near the edge and wider toward the bridge
1.5" bottom spacing 2.75" bridge

BIXBY?? Did Bill make it himself?

#6 User is offline   Blackie 

  • BANNED
  • Group: Banned
  • Posts: 3673
  • Joined: 13-September 09
  • LocationVirginia Beach

Posted 04 January 2010 - 11:36 PM

You could mount it closer to the bridge......after you get the stop bar out the way.

#7 User is offline   Sigournius 

  • Member
  • Group: Members
  • Posts: 22
  • Joined: 04-January 10

Posted 05 January 2010 - 02:07 PM

BIXBY LIKE TO PUT THEIR NAME ON THE CASTING, NOT 'GIBSON' LIKE THIS ONE.
ANY OF YOU EXPERTS TRY A SCHALER ROLLER BRIDGE? THINKING OF TRYING ONE TO GO WITH THE ROLLER NUT I'M USEING.

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users