Gibson Guitar Board: Gibson P94 set installation question - Gibson Guitar Board

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Gibson P94 set installation question

#1 User is offline   twoonie2 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 06-May 08

Posted 16 December 2009 - 01:51 PM

Hello everyone!

I'm patiently waiting for my set of Gibson P94 pickups that I ordered a few days ago but have a few quick questions..

I noticed in the wiring diagram that it mentions that one of the pickups may need to be wired in reverse if the middle position (with both pickups on) isn't loud enough... I'm dropping these into an SG Supreme - so instead of guessing which way I should be wiring it.. can anyone chime in that has experience installing this particular set of pickups and how they wired them up?


Thanks!!
0

#2 User is offline   twoonie2 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 06-May 08

Posted 22 December 2009 - 01:03 AM

Received a reply from Gibson directly - just thought I'd share the info for anyone else considering a P94 set...

"Hello,

Thank you for writing.  If you use the black lead on one pickup and white lead on the other, you should not have any issues with this.  Thank you for the inquiry!"
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users