Jump to content
Gibson Brands Forums

Orville Les Paul


bonzoboy

Recommended Posts

I just got an email from my buddy,he just received a near mint Orville Les Paul he ordered from an American Collector living in Japan.This guy gave a written guarantee that it would sound just as good or better than a Gibson Les Paul in a side by side comparison or he'll take it back and pay the shipping.He's coming over with it tonight to run it through my JCM 800 2204,that will surely put it to the test as nothing can come close to the sound of a Les Paul through a Marshall.I'll post the verdict tonight or tomorrow.

------------------------------------------------------------------------

Link to comment
Share on other sites

"Orville" IS..or rather WAS, Gibson! Gibson Japan! Same specs, or better. Long neck tenons,

were pretty much standard, on Orville's...LP's SG's and their ES thinline models! Add to that

legendary Japanese workmanship (AKA Pride), and it will be one Hell of a Guitar! "Better" than

USA made Gibsons? Possibly, but certainly as good as...if not better. Again...IMHO, as always.

 

CB

Link to comment
Share on other sites

"Orville" IS..or rather WAS' date=' Gibson! Gibson Japan! [/quote']

 

I'm not sure this is technically correct, CB. Were the Orvilles and ObGs not made by Fujigen for Gibson? They were the precursors to the solid body Elites/Elitists, I believe.

 

I could be mistaken (it's been known to happen), but this is my understanding. Having a nice Elite '57 Goldtop, I have an interest is such things!

 

All that being said, I would expect the Orville in question will prove to be a fabulous guitar.

 

Cheers

Link to comment
Share on other sites

Technically, I suppose so. But, they were made, for the Japanese market, per Gibson authorization, and specs. They were being made, anyway...under various brand names, by Fuji-gen, and the Terada Factories...along with Fender copies. So, Gibson and Fender just let

them do so, under their brand names, for the Japanese, and Far East markets. My MIJ Epiphone '61 SG, with "Gibson" headstock, is just

a later offshoot (Epiphone Japan) version. Their contract, for those Epiphone versions, ran out in 2006.

A bit more information, below:

 

Orville by Gibson

From Wikipedia, the free encyclopedia

Jump to: navigation, search

 

Orville by Gibson guitar headstockOrville by Gibson (Japanese) ????by???? (also known simply as Orville (Japanese) ????) was a brand of guitars that was managed by the Gibson Guitar Corporation for the Japanese market during the late 1980s and most of the 1990s.

 

Contents [hide]

1 History

2 Models

2.1 Electric Guitars

2.2 Electric Bass Guitars

2.3 Acoustic Guitars

3 Serial Numbers

4 Retail Release History

5 Epiphone Japan

5.1 Epiphone Japan Serial Numbers

6 Sources

7 References

8 External links

 

 

[edit] History

During the 1970s and the 1980s, certain Japanese Guitar companies using brand names such as Ibanez, Tokai, Burny, and Greco were making high quality copies of Fender and Gibson guitars. Some brands were sold only on the Japanese market, but other brands, such as Ibanez were exported from Japan. Fender and Gibson opened Japanese branch divisions to make guitars in Japan using the Fender/Squier or Gibson/Epiphone brand names for the Japanese market.

 

Fender established Fender Japan in 1982 and contracted Yamano Gakki (Japanese) ???? and Kanda Shokai (Japanese) ???? to oversee the production and distribution of Fender Japan guitars in cooperation with Fender. Yamano Gakki (Gakki stands for musical instrument company) are one of Japan's largest musical instrument distributors/retailers and Kanda Shokai are one of Japan's largest musical instrument distributors. Gibson established Epiphone Japan in the early 1970s with the production and distribution being managed by Aria in cooperation with Gibson.

 

The Aria and Gibson Epiphone Japan partnership ended by 1986 and in 1987 Yamano Gakki obtained the Gibson and Epiphone dealership in Japan [1]. Yamano Gakki distributed Gibson and Korean Epiphone guitars and also produced a limited range of Epiphone Japan semi acoustic guitars in cooperation with Gibson. In 1988 Yamano Gakki decided to expand the Epiphone Japan model range to include solid body models as well as semi acoustic models.

 

Gibson and Yamano Gakki decided not to use the Epiphone brand name for the expanded model range and so the Orville name was chosen instead. Orville is the first name of the Gibson corporation's founder Orville Gibson. When the Orville by Gibson series was launched in 1988, Gibson was also selling American-made Gibson guitars, Japanese-made Epiphone guitars, and Korean-made Epiphone guitars in Japan. The Orville by Gibson and Orville series were distributed by Yamano Gakki and were priced midway between the American-made Gibson guitars and the Korean-made Epiphone guitars.

 

There were a number of changes to the Orville by Gibson and Orville model range between their beginning in 1988 and their end in 1998 that are shown in the Retail Release History section. The Orville series were discontinued in 1998 due to Gibson and Yamano Gakki deciding to export an expanded Epiphone model range that included solid body and semi acoustic models. Gibson and Yamano Gakki ended their relationship in late 2006.

 

[edit] Models

[edit] Electric Guitars

Les Paul Standard

Les Paul Custom

Les Paul '57 Reissue

Les Paul '59 Reissue

Les Paul Studio Joe Perry Joe Perry (musician)

Les Paul John Sykes John Sykes

SG Doubleneck

SG Custom

SG '62

SG '61 Reissue

Les Paul Junior single cutaway

Les Paul Junior double cutaway

Melody Maker

Firebird

Explorer

Flying V '58 and '74

ES-175

ES-335 Dot

Byrdland

[edit] Electric Bass Guitars

EB-3

Thunderbird

[edit] Acoustic Guitars

J-200

Dove

J-45

J-160E

Hummingbird

Chet Atkins

L-1 Historic Series Robert Johnson (musician)

L-00

[edit] Serial Numbers

There were two Japanese guitar factories involved in all of the Orville by Gibson and Orville production and they were Terada (Japanese) ?? [2] and Fuji-Gen (Japanese) ???? [3]. The Gibson Les Paul Book by Tony Bacon and Paul Day (1993) [1] mentions that both the Orville by Gibson and Orville guitars, including the K Orville guitars (1989-1993) were made in Japan. When the Orville by Gibson series began in 1988, Fuji-Gen were concentrating on making Fender Japan bolt-on neck guitars and so the G serial Orville by Gibson and K Orville set-neck guitars were all made by Terada. Fuji-Gen began making Orville by Gibson guitars in late 1992 and also Orville guitars in 1993 after they established Fuji-Gen Hirooka Inc [4] in November 1991. After opening Fuji-Gen Hirooka Inc, Fuji-Gen resumed large scale set-neck guitar production. After Fuji-Gen were contracted by Yamano Gakki in late 1992, Fuji-Gen were assigned to make most of the Orville by Gibson and Orville solid body guitars and Terada shifted to its more traditional role of mostly making Semi Acoustic guitars .The production of the Terada solid body K Orville guitars and most of the Terada solid body G serial Orville by Gibson guitars were ended in 1993 as a result.

 

Fuji-Gen and Terada used different serial number formats (Orville by Gibson Terada decal box). Terada used a G or J letter at the start of the serial number and Fuji-Gen used a serial number consisting of only numbers and no letters. The Terada G serial number letter basically stood for "Gibson pickups" and the Terada J serial number letter basically stood for "Japanese pickups". When the K Orville guitars were made between 1989 and 1993, Terada were the only guitar factory making all of the Orville by Gibson and Orville guitars. The Orville by Gibson and Orville EB-3 SG Bass guitars which were priced at over 90,000 Yen were given G letter serial numbers by Terada. The lower priced (K) Orville guitars which were priced at 75,000 Yen and below were not given serial numbers by Terada. Serial numbers are not always essential when only one guitar factory is making all of the guitars, as the distributor (Yamano Gakki) knows exactly which guitar factory made the guitar even when the guitar has no identifiable guitar factory serial number. As Terada were the only guitar factory making all of the Orville guitars between 1989 and 1993, they did not need to serialize the (K) Orville guitars which were made more for the first time or intermediate player market.

 

When the (K) Orville guitars were released for retail sale between 1989 and 1993, Yamano Gakki applied a year dated (K) serial number sticker for warranty serial number tracking. The K serial number prefix letter stands for Kuramae which is where Yamano Gakki's wholesale division is located. The higher priced Orville by Gibson and Orville EB-3 SG Bass guitars were Yamano Gakki's and Terada's main priority in the early years and were made for the intermediate and professional player market and were therefore given serial numbers to be in step with Gibson's usual practice of using serial numbers on Gibson guitars. Different serial number letter prefixes are usually used when more than one guitar factory can be making the same brand and model of guitar at the same time. When Fuji-Gen joined together with Terada in making the Orville by Gibson guitars in late 1992 and the Orville guitars in 1993, serial numbers were used on all of the Orville guitars by both Fuji-Gen and Terada with Terada using a J letter serial number for all of the Orville guitars they made after the K Orville guitars ended in 1993. A 1993 75,000 Yen K Orville Les Paul and a 1996 75,000 Yen J letter serial numbered Orville Les Paul are basically the same guitars made by Terada.

 

The Orville by Gibson and Orville serial number format had 4 variations in the 10 years that they were produced. The Orville by Gibson guitars used ink stamped serial numbers and the Orville guitars used both ink stamped serial numbers and Yamano Gakki (K) serial number stickers.

 

Serial Number Format: 1988-1989.

 

From 1988 to 1989 a YYPPPP serial number format was used for the Orville by Gibson guitars and Orville SG bass EB-3 guitars.

 

YY is the production year, 88=1988, 89=1989.

PPPP is the production number.

For example G887013 is dated 1988 and was made by Terada.

 

Serial Number Format: 1989-1998.

 

Starting in 1989 a new serial number format of YMMPPP was used for the Orville by Gibson guitars and Orville SG bass EB-3 guitars.

 

Y is the production year, 0=1990, 1=1991 etc.

MM is the production month.

PPP is the production number.

For example G206135 is dated June 1992 and was made by Terada, J603523 is dated March 1996 and was made by Terada, 411264 is dated November 1994 and was made by Fuji-Gen. This format was also used for the ink stamped serial number Orville guitars from 1993 to 1998.

 

Reissue Serial Number Format: Late 1992-1995.

 

The Orville by Gibson 1957 and 1959 Les Paul reissue models (LPS-57C, LPC-57B, LPS-59R) and the Orville by Gibson 1961 SG reissue model (SG-61R) had two different serial number formats.

 

The first reissue serial number format was a YMMPPP format.

 

Y is the production year, 3=1993, 4=1994 etc.

MM is the production month.

PPP is the production number.

The second reissue serial number format was a YPPPP format.

 

Y is the production year, 3=1993, 4=1994 etc.

PPPP is the production number.

For example G3 6942 is dated 1993 and was made by Terada, 4 7345 is dated 1994 and was made by Fuji-Gen, G306385 is dated June 1993 and was made by Terada, 412562 is dated December 1994 and was made by Fuji-Gen.

 

The YPPPP Orville by Gibson reissue serial number format is the same format as the Gibson reissue serial number format. The reissue year is in the model number (LPS-57C = 1957) and the 1957 and 1959 Les Paul and 1961 SG reissue models were made from late 1992-1995 with some guitars having limited production runs.

 

K Serial Number Format: 1989-1993.

 

The Yamano Gakki K Orville serial number format is K 0YPPPP. The shortened K Orville serial number format is YPPPP, with the K letter and the first 0 having no year or date information.

 

Y=year with 9=1989, 0=1990, 1=1991 etc.

PPPP is the production number.

For example a K Orville serial number such as K 015113 = 1 5113 = 1991 and 5113 = the production number.

 

[edit] Retail Release History

Retail release information from Yamano Gakki catalogues [5].

 

The K Orville Les Paul Standard and Custom models originally retailed for 65000 Yen (Japanese) ? beginning in 1989 and in 1990 the Orville by Gibson and Orville model prices were increased. From 1990 to 1998 both the K Orville and ink stamped Orville Les Paul Standard and Custom models retailed for 75000 Yen. Orville photo flame models retailed for 80000 Yen. Orville signature models and Orville ebony fingerboard models retailed for 85000 Yen [6].

 

Orville by Gibson models retailed for over 90000 Yen and were introduced in 1988. The Orville by Gibson guitars featured nitrocellulose finishes and Gibson pickups. In 1995 the Orville by Gibson models were discontinued and only Orville models were continued until 1998. The Terada G, J and K serial number Les Paul guitars featured a mixture of medium, medium long and long tenon neck joints. The Fuji-Gen no letter serial number Les Paul guitars featured long tenon neck joints.

 

1989-1993: Terada K serial number Orville guitars with Yamano Gakki (K) serial number stickers.

1993-1998: Fuji-Gen no letter serial number Orville guitars.

1995-1998: Terada J letter serial number Orville guitars.

1988-1995: Terada G letter serial number Orville by Gibson guitars.

(Late)1992-1995: Fuji-Gen no letter serial number Orville by Gibson guitars.

1991-1993: Terada G letter serial number Orville by Gibson Acoustic guitars. Terada AG serial number, A = Acoustic.

[edit] Epiphone Japan

Epiphone Japan was first established by Gibson in the early 1970s with the dealership mostly being managed by Aria in cooperation with Gibson. The Matsumoku guitar factory in Japan was used to make the Aria Epiphone Japan guitars. In 1987 Yamano Gakki obtained the Epiphone Japan dealership and produced a limited range of Epiphone Japan semi acoustic models in cooperation with Gibson. The Terada guitar factory in Japan was used to make the Yamano Gakki Epiphone Japan guitars. After Gibson and Yamano Gakki ended Orville production in 1998, Gibson and Yamano Gakki produced an expanded Epiphone Japan model range including solid body as well as semi acoustic models.

 

Some of the Gibson/Yamano Gakki Epiphone Japan guitars were exported. The Epiphone Japan guitars that were intended for export do not have a Gibson style open book headstock. The Epiphone Japan open book headstock guitars were produced for the Japanese market only. The same Terada and Fuji-Gen guitar factories that made all of the Orville by Gibson and Orville guitars were used to make the Gibson/Yamano Gakki Epiphone Elite and Epiphone Elitist series with the Terada guitar factory mostly making the semi acoustic models and the Fuji-Gen guitar factory mostly making the solid body models. Gibson and Yamano Gakki ended their relationship in late 2006.

 

[edit] Epiphone Japan Serial Numbers

The Yamano Gakki Epiphone Japan serial numbers from 1998 onwards (after the Orville series was discontinued) are in a YMMPPP format.

 

Y=year.

MM=month.

PPP=production number.

The serial number letters used by the Terada and Fuji-Gen guitar factories are J = Terada, T = Terada, no letter = Fuji-Gen and F = Fuji-Gen. For example 903584 is dated March 1999 and was made by Fuji-Gen, J903584 is dated March 1999 and was made by Terada, F505693 is dated May 2005 and was made by Fuji-Gen, T505693 is dated May 2005 and was made by Terada.

 

For Yamano Gakki Epiphone Japan semi acoustic models from 1987 to approximately 1997, the serial numbers are in a YCPPP format. They were made by Terada and usually have an Orange Epiphone label.

 

Y=year.

C=model code.

PPP=production number.

Model Codes ©

 

1 = NVJ

2 = EMPEROR

3 = RIVIERA

4 = SHERATON

5 = CASINO

6 = Limited Edition

7 = EB-2

8 = ES-930J

9 = EMPEROR-J

For Example 34784 = 3 4784 = 1993 SHERATON.

 

The Aria Epiphone Japan models that were made by Matsumoku from the early 1970s and ending before 1987 do not have a reliable serial numbering system but can be approximately dated using their Epiphone label colours.

 

Blue label: early 1970s-1980

Light brown label: 1980-1985

Brown label: 1985-1987

[edit] Sources

Yamano Gakki Japan, Epiphone Japan, Orville by Gibson Catalogues.

 

[edit] References

^ The Gibson Les Paul Book by Tony Bacon and Paul Day (1993). GPI Books Miller Freeman Inc. ISBN 0-87930-289-5

[edit] External links

Terada Factory Tour

Fuji-Gen Factory Tour

Retrieved from "http://en.wikipedia.org/wiki/Orville_by_Gibson"

 

 

CB

Link to comment
Share on other sites

-Great info C.B. thanks,I'll let my buddy know about the info you posted,his is a 97 Fugi-Gen Les Paul Custom black with gold pups and hardware.we plugged it into my JCM 800 2204 Marshall and it tore the roof off,even when you rolled back the guitar's volume to 7 it still sounded raunchy.I had the Bass Mid Treble and Presence on 10 the volume on 10 and the master on 4 and it just sounded incredible.I don't believe the pups are potted as there was quite a bit of feedback when you got within 8 ft. of the amp,he's bringing her to his tech tomorrow for set up,I'll suggest he get the tech to check if they were potted or not.

------------------------------------------------------------------------

Link to comment
Share on other sites

Hey guys. I am the buddy that Bonzoboy referred to. I do have my Orville Les Paul Custom back from the shop!!!! The guitar tech I deal with was very impressed this morning when he first took the guitar out of the case, but was even more impressed when he started working on it...it set up easier than any new guitar he's worked on in a long time, it has a nice low action now without any fretting out whatsoever. He loved the sound of the pickups and the quality of the guitar. He told me that he then went to the internet and reserched these guitars and checked out the prices of them on everybody's favourite auction site. He then wondered why somebody would spend 3x as much for the name on the headstock when you could get one of these..."It's a no brainer!!!" I believe was his reply!!!

 

DSC00296.jpg

DSC00296.jpg

DSC00299.jpg

DSC00294.jpg

DSC00295.jpg

Link to comment
Share on other sites

Yeah, we have all mourned the loss, of the "Elitist" line! And, have said so, ad nauseam, on this forum,

since it happend. I...for one, was/Am hoping, they will get back to that kind of quality, for Epiphones,

at Qingdoa, eventually. There is NO reason, they couldn't...EXCEPT Gibson Corporate, not allowing it.

Chinese workers, like Japanese workers, can make as good a guitar, as any workers in the world.

They only have to have the right incentives, be allowed, and paid to do so, by whatever company

(American or not), they work for. IMHO, as always. ;>)

 

CB

Link to comment
Share on other sites

Yeah' date=' we have all mourned the loss, of the "Elitist" line! And, have said so, ad nauseam, on this forum,

since it happend. I...for one, was/Am hoping, they will get back to that kind of quality, for Epiphones,

at Qingdoa, eventually. There is NO reason, they couldn't...EXCEPT Gibson Corporate, not allowing it.

Chinese workers, like Japanese workers, can make as good a guitar, as any workers in the world.

They only have to have the right incentives, be allowed, and paid to do so, by whatever company

(American or not), they work for. IMHO, as always. ;>)

 

CB[/quote'] Amen to that !!!

Link to comment
Share on other sites

Thanks guys. I finally got a chance yesterday to take it for a good spin around the block. It just sounds fabulous!!! It is not potted though but that only seems to be a bit of a problem when running a lot of distortion. Put the amp(Roland Cube 30x) settings on classic stack and it really sings without much feedback at all.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...