I have a few set up at those specs. I usually adjust to a .000"-.005" neck relief. Two other factors I pay attention to are nut slot depth measuring the string height at the 1st fret and secondly I check for any high frets. One common problem I see in the modern Gibson acoustic guitars is after a truss rod tweak, area around the third fret rises and I have to address that. It's beyond my pay scale to figure that one out, but it's happened more than a few times. I currently have one (J160E) I have to address. As always, I tap down the fret and recheck before leveling it out.
Good luck!