Jump to content
Gibson Brands Forums

iluvcrap2000

All Access
  • Posts

    102
  • Joined

  • Last visited

Reputation

3 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Try looking on reverb or ebay for comparisons.
  2. Adjust the pickup heights, lower the bridge and raise the neck to your liking.
  3. Usually looking for parts for guitars made overseas you look for import parts based on metric specs, American made guitars usually use imperial measurements. Try lookng at https://www.guitarpartsfactory.us/index.php?route=common/home http://www.musiclily.com/ https://www.stewmac.com/ https://www.eyguitarmusic.com/ The interior pickup dimensions should be standard. or you can go on ebay or reverb and buy epiphone PU rings off of there too.
  4. You could also get a new harness put in in 50's style along with different caps to get the sound you want.
  5. What's the differeance between the 61 burstbucker compared to the BB 1,2,3, Pro/Pro plus? or are they the same as the 2018 61's that were on the 2018 SG's? Disappointed that the 19 Lp 60's don't have Locking tuners.
  6. it's it's a 2018, try adjusting the DIP switches, take the Treble bleed off. also adjust the pickup height as sugested. If it's too high it's more powerful, lowering it gets a more mellow sound. in the Neck if it's high it gets very strong but if you lower it you get a reall good tone. Check several classic LP's and see how their Neck PU are.
  7. Hi i'm Anna.

    I am looking for a gentle and SEXy man

    My photo hеrе https://sex-gibson.tumblr.com

    Kisses Iluvcrap2000

  8. Just plug all the plugs back into it, screw the ground wire down, that's it. Taking the speed knobs off and not yanking the shafts out as per their warning(on original board), was carefully done, otherwise it was fairly easy. no soldering required, no battery pack, done less then 10 minutes(had to adjust the pot nut base height to fit your own top width otherwise). I have to dig my amp out and crack it to see how this thing reacts, running it through amplitube/headphones doesn't give me the full tone.
  9. ok, had to pull the trigger, ebay had a 20% off deal so I got one of their mk2 JPM2 Black boards, https://reverb.com/shop/scriniaengineering for $148. Very fash shipping(helps if your in same city as well). Got it today and decided to put it in. Read the included instructions to not damage your shafts. The old PCB came out pretty easy and the new one was effortless to put in. Noticed a Huge Difference in tone. The old Coil taps were out(I couldn't hear much of a differance), now their are splits and are more noticable. the old bypass is now a seris/parallel. otherwise think it's more flexible then it was.
  10. I've gotten two harnesses from Jersey shore guitar garage, thanks http://jerseyshoreguitargarage.com/
  11. no I was browsing reverb for parts. Stumbled upon this, thought about upgrading my pcb with a aftermarket harness as I really don't use the true bypass and the pots aren't as sensitive as I'd like. I can't tell the differance with the coil taps and the out of phase isn't as keen. Interesting someone is making a aftermarket pcb with these features, would like to see if it's any good. Looks like some quality work from the pictures and info. The manufacturer says it's a true drop in to Gibson les paul with no mods for it to work so that's a relief. Would like to hear the true differance between the burstbucker coil splits vs the taps. anyway thanks for the opinions.
  12. like one of these https://reverb.com/item/7891531-gibson-or-epiphone-control-board-for-les-paul-jimmy-page-mk-2-major-upgrade-with-speed-knobs I've used a prewire aftermarket harness before, but these new pcb boards are new. Any thoughts?
  13. Is the Made to measure option still available? Which dealers have custom guitar runs out? Can somone go to gibson HQ and place a custom order for a guitar?
  14. I spoke to gibson rep he says all epiphone guitars no longer come with 1/4 cable. booo. My guitar is also setup wrong and didn't come with warranty card. otherwise got everything else.
×
×
  • Create New...