Jump to content
Gibson Brands Forums

mojoworking

Members
  • Posts

    213
  • Joined

  • Last visited

Reputation

5 Neutral

About mojoworking

  • Birthday 07/16/1950

Profile Information

  • Gender
    Male
  1. Yes, a J200 with an aftermarket Fishman pick-up
  2. Thanks Jeff, I'll look into that. Someone suggested the lack of "Made in USA" on the back of the headstock could mean the guitar was made for the Japanese market. As I said, there was evidence the guitar had spent time in Japan, judging by the items in the case. I was hoping the Gibson factory could tell me where the guitar had been originally shipped, or at least clarify the exact model run.
  3. Thanks. I think they transposed or messed up a couple of lines there. I'm sure it should read Top: Sitka spruce Back & sides: Mahogany Bracing: Traditional Hand Scalloped X-bracing
  4. Thanks Bob. I wrote to Gibson, hoping they could tell me where the guitar was originally shipped and/or how it was marketed, like a special run for a store etc. Andrew at Gibson Customer Service very kindly replied with a spec sheet, but it didn't really tell me much I didn't already know. This is what he sent me: · Series: Limited Edition · Body Style: Round Shoulder · Mahogany: Top · Bracing: Sitka spruce , Traditional Hand Scalloped X-bracing · Neck Profile: Round Profile · Neck: Mahogany · Neck width: 1.725’’ · Neckjoint: Compound Dovetail Neck-to-body · Fingerboard: Rosewood · Scale length: Short · Number of frets: 20 · Nut: Bone · Inlay: Mother-of-Pearl dot · Binding: Multiply top Single-ply Back · Bridge: Rosewood belly up, adjustable saddle · Tuners: Grover · Strap: Cream Button · Plating: Nickel · Electronics: None · Pickup: None · Case: Black Gibson Hardshell
  5. I recently picked up this J45 ADJ. From the serial number it's a 2013 model, but other than that I can find no info about it. The store had no idea either. Here's the specs: It's a Custom Shop guitar with no electronics It has a regular 8 digit serial number, not a Custom Shop number No "made in USA" on the headstock Cherry red finish with adjustable bridge and large pickguard (ie 60s appointments) "Only A Gibson Is Good Enough" banner logo (ie 40s headstock) I've searched the internet but found nothing. Any ideas? Was this a special order? The guitar seems to have spent time in Japan as some of the products in the case have Japanese writing.
  6. I wonder if that's a borrowed sunburst J-45 Ralph is playing in the Folk Cottage pic? He was only a year away from his first LP in 1967 by which time the guitar had been re-finished. In the UK Gibsons were the stuff of dreams in the 60s. Most people couldn't afford them and even if you had the money, they were hard to find, especially outside London. So cheaper brands like Harmony, Hagstrom and Levin were popular. They weren't nearly as good as Gibson or Martin, but they were perfectly serviceable for folk club use. Growing up in the UK in the 60s, I was always amazed and insanely jealous whenever I saw footage of American students on campus. Whenever a guitar appeared it was invariably a Gibson or Martin, something we could only dream of in Britain. It seemed like great guitars were cheap and freely available to 50s/60s kids in America.
  7. The last picture shows Wizz Jones (centre with glasses) playing an Epiphone Texan. As I've mentioned several times in this thread Wizz still uses Texans, although he favours natural finish examples these days. The picture was taken in 1967 at the Folk Cottage, a famous folk club in Cornwall http://kernowbeat.co.uk/folkcottage.html
  8. Not that short-lived. John Renbourn played his famous Gibson J-50 on all but the first of his solo LPs from 1967 up to "The Hermit" in 1976 and right though the first incarnation of Pentangle. It was retired only after being damaged by an airline. The J-50 was repaired and is still around today owned by a guitarist named Remy Froissart and can be seen at the annual John Renbourn Guitar Workshops, which have continued after John's death. Likewise Davy Graham used his J-50 on all his Decca LPs from 1964 to 1969. After playing a J-50 on his first LP in 1968, Ralph McTell STILL uses a modern custom shop J-45 or J-50 today. Wizz Jones has played Epiphone Texans from the 60s right through to the present day. Martin Carthy has always used small-bodied Martins, never Gibsons.
  9. Davy went off to North Africa in the early 60s and came back playing African and middle eastern music arranged for guitar, at a time when folk music was still rooted in the pre-Dylan three chord era. He's credited with introducing the DADGAD tuning into popular music, which was picked up by Jimmy Page and the like. His peak was 1964-69 and his records were patchy after that. But even in the late 70s Davy was recording albums of music from many countries on all kinds of instruments.
  10. Bert Jansch never played Gibsons. He was mostly associated with high-end Yamahas in recent years, while his early LPs were recorded on a small bodied Martin, possibly a 00028. In the early years he also used custom built guitars by John Bailey a British luthier. Bert is pictured onstage with a 60s sunburst Epiphone Texan in the booklet of the CD "Young Man Blues - Live In Glasgow 1962 - 1964" a collection of early live recordings, but it's thought that was a borrowed guitar.
  11. ...and the guy who literally inspired Renbourn and McTell to pick up those J-50s, Davy Graham. For those who don't know this guy, he's credited with starting the entire UK folk blues guitar movement, he virtually invented world music and influenced just about every player who came after. A poor singing voice and a debilitating drug habit seriously curtailed his success, but those who know about guitar will tell you Davy was THE man. His 60s Decca LPs (issued on the London label in the US) are unbelievable. In case of confusion, he later spelled his name Davey. Another much underrated UK folk guitarist is Wizz Jones. He's from the same folk blues generation as Bert Jansch, John Renbourn etc and has long been associated with 60s Epiphone Texans
  12. I paid AUD$2000 for the J15 (reduced from AUD$2300), while the J29 was AUD$3400
  13. Thanks Hollowdan. I actually tried out a J35 and a J29 in the store at the same time, but went for the J15 for two reasons. It played better than the others (their necks were too chunky for me) and it was at least a grand cheaper. No contest. The only quality control flaw I've noticed is that end of the fingerboard over the soundhole has not been varnished, otherwise I'm very happy with the J15
  14. And look at those other budget Gibsons that started out bottom of the range in the 50s & 60s: Les Paul Junior SG Junior Melody Maker Firebird I All of them are hugely collectable vintage instruments today (well, maybe not the Melody Maker so much, but you get the idea)
  15. That should be Gibson's new strapline for the J15 next time they take out a full page ad in the guitar mags. "The new Gibson J15 - one step up from firewood" I had a look at "quarter sawn" on Wiki and although it was complicated, it kind of made sense and I can see the advantages. But I'd still like to hear one of the experts here explain why flat sawn is so bad,
×
×
  • Create New...