Feddo

Thanks! I’ve seen a Special Faded with a 3way toggle, but not with extra knobs. I have no issue with these mods, if it’s an oem 3pup guitar. I can solder a 6-way rotary in, and 3 volumes seems like a good idea too. Kinda hard to put a price/value on it though, as it sits now.

Looking for help for identifying this (probably modded) SG. The current owner knows nothing about it. I want to assume it's a "Faded" SG3 from 2007 in white, as the serial number shows but also the fact the serial is still white and the guitar likely sanded back to mahogany and stained. Back of the neck has traces of white too. But the switch and 4-knob setup seems "off", nevermind the fact that as far as I know, all of the 2006-2008 Faded's had one volume, one tone, and a 6-way "chicken head" selector switch. Also, the pickup covers are wrong for that model but obviously an easy install at a later date. But check out the middle pickup, and the current owner has a Seymour Duncan in bridge position.

You need an 0.9mm Allen key to get that screw. It only serves to hold the "inners" to the post of the push/pull pot. The ring is only friction fit to hold the display down.

The screw is M2x4, and the Allen key that you need is 0.9mm. The screw holds the "inners" of the MCK onto the the push/pull pot post. The ring/knob that holds the led display into place is indeed friction fit, which is a useless design.