Jump to content
Gibson Brands Forums


All Access
  • Content Count

  • Joined

  • Last visited

Everything posted by fazeka

  1. Huh. I guess you're right. Had to put on the ol' specs so I could see up close... Wonder why they are doing that? I mean, they're "binding" it with wood, but... the originals never had ANY neck binding. Plus, it's more work than just simply installing frets, which I suppose means more expense?
  2. Another thing I noticed: no visible fret ends. They are apparently undercutting the fret tang upon install. Although not like the originals, I kinda like it! Check out the upper left corner on this vintage original (Crestwood, but you get the idea):
  3. Sorry, that is NOT a 1960 Gibson-made Epiphone. Gibson-made Epiphones were NOT using labels like that in 1960. The label would have been blue, as the labels on much of the Gibson-made Epiphones in the 1960s were. Here's a 1961 Casino: https://reverb.com/item/36496975-epiphone-casino-single-pickup-e-230t-sunburst-1961 Hard to see, but this is the label it should have if it were truly a 1960: https://i.imgur.com/8wCP9xT.png Enjoy it nonetheless.
  4. Actually, I just got the Wilshire today: no scarf! 😁 (at least, I can't see a scarf)
  5. Huh, that picture of your new Epiphone looks a lot like the photo I have in that other thread: Which came from this website: https://www.themusiczoo.com/products/epiphone-wilshire-p-90-cherry?variant=32733810819151 You bought the Music Zoo Wilshire?
  6. OK, I found it again: I think this will work for the bridge? https://www.philadelphialuthiertools.com/bridge-and-tailpieces/abr-1-bridges/abr-1-parts/import-conversion-posts-install-abr-1-on-epiphone-other-import-guitars-nickel/ I presume that the Epi posts are an M8x1.25 thread?
  7. Hi all, I asked in another thread but saw this thread here where it may be appropo to ask: does anyone know if these new Epis have scarf joints? I tried to look at some photos and it's a little difficult to see and maybe I'm fantasizing but... I can't see any?!? https://i.imgur.com/uv05VvU.png https://i.imgur.com/OkGXmjs.png
  8. Hi all, Looking to acquire the new Epiphone Wilshire. I basically am interested in modding it to use Gibson parts wherever possible and short of major surgery. I am hoping for "plug and play" and am mainly concerned about sizing of the various parts and what is available from third-party vendors. Just wanted to preface by saying I've never had a post-1970 Epiphone before and I've been trying to do research on these Asian Epiphones but different recent eras have different details about them and it gets difficult to keep everything straight. So I appreciate your time and knowledge
  9. Ya! Just like Lennon's first 325 (second one made out of a total batch of less than, what, 30?) without the f hole...
  10. OK, I did some research and the evidence is pretty clear. Gibson shipping records for June 1962 J160E's: George and John received 73157 and 73161. As typical with Gibson and other manufacturers, Gibson made guitars in batches. They had a whole batch of J160E's made, at least 10 that shipped 6/27/62 with one shipping 7/20/62. So, I was interested to see if others in that batch that had the one-screw truss rod cover. Sure enough, I found at least one from that batch with photos that are clear enough to show the one-screw truss rod cover, serial 73153: headstoc
  11. Hi, I have always wondered why the truss rod cover on the 2017 run of the 1962 J160E has only one top screw securing the truss rod cover. Anyone know? Was Lennon's/Harrison's like this? I never noticed this on any (vintage) Gibson, ever. Was it an error of the particular run? If I were to put on a two-screw truss rod cover, would it have wood there for the lower screw to bite into?
  12. Four sunburst, three natural: https://i.imgur.com/n4fWx5h.jpg
  13. I agree with bobouz. BTW, here's the link using the wayback machine: http://web.archive.org/web/20171225181207/https://www.epiphone.com/News/Features/2017/The-Long-and-Loud-History-of-the-Epiphone-Casino.aspx I don't see any evidence within that link of the Casino being designed pre-acquisition.
  14. The US made Casinos will be good. Teradas are good too.
  15. Source of info on this? His original '61 "Cavern" bass was a factory lefty AFAIK, and not a converted RH.
  16. Well, they're not made in the custom shop but on the regular production line. But they will be fine, I'm sure.
  17. Also to be clear, when I replied that John's Casino was "never refinished after he stripped it" in response to your original comment you said about John painted it psychedelic after he sanded it, what I meant was that he never refinished it in a non-clear coat post the stripping. IOW, the events went like this: original sunburst finish->"psychedelic" spray paint on rear with paint runs on interior cutaway rims->stripped finish.
  18. I don't know if George clear-coated his after he stripped it. I presume so as I think George was savvy enough to know that unfinished wood would stain/discolor due to sweat/oils etc. from handling. John, on the other hand, probably could care less and was more about function, with aesthetics taking a back seat. Look at his original 325 Rick after it was refinished black. Detailed photos of the time show various nicks/dents in the finish. Hell, the vibrato arm on his second 325 is bent in an unusual way, as well. I think I remember reading that when the Gibson rep inspected his Casino in '
  19. Hmmm... George indeed did scrape the finish off his Casino: https://2.bp.blogspot.com/-W1fvUtW48h4/WixZteVV4uI/AAAAAAAAB_4/Saq9IteMqcgtujAYhmrmRiZy77EbewsBQCLcBGAs/s1600/GH3.jpg John scraped/sanded the finish off his after his psychedelic finish attempt in '67 (I think this meant spraying the back?) http://www.thecanteen.com/casinoback.jpg https://4.bp.blogspot.com/-yJ8IqsbxlPA/XAexEZC_grI/AAAAAAAAP3M/R4RNq-mxELQQvrDtPNDpq7R7hreeAuoywCLcBGAs/s1600/JL%2B23.jpg Never was refinished after he stripped it. Here it is in '97 being measured for the 1999 reissue: htt
  20. One thing pointing to a summer release... there was another rumor that these USA Casinos at NAMM served as a preview to the summer NAMM... ??? ...which, if true, is kinda like a preview to the preview. 😕 Would explain why the USA Casino is not shown/marketed on the Epiphone site. On the other hand, someone else on another site said their friend that was a dealer is going to be ordering some soon. Best thing we can do is just hang tight, I guess.
  21. For the Casino, the rumor I heard was $2799. Summertime availability.
  22. There's a private forum I frequent that had a really great write up on the history of Epiphone in the '60s. It addresses especially the consideration of pricing and will be invaluable to those that weren't around or don't remember Gibson US-made Epiphones. I thought it was very well written and I wish I could just post a link to it. Failing that, here's the post: "That's why there WAS an Epiphone brand, so the parent company CMI could sell guitars to a second dealer when there was already a Gibson dealer in that territory. If a Gibson dealer had a territory, CMI could not sell Gibson
  • Create New...