Jump to content
Gibson Brands Forums

Tragic1281734187

Members
  • Content Count

    29
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Tragic1281734187

  • Rank
    Member
  1. You can do this. Worked for me. http://forums.epiphone.com/default.aspx?g=posts&t=14233
  2. So, replacing R22 would be more for 6V6's lifespan, correct? thanks
  3. Jaydodge, So, Replace the 10 watt 250 ohm to a 680 or 1K 10 watt (R22)? Are the Valve Seniors biased too high? Stock?
  4. Has anyone tried 6L6's in the Valve Senior? I have no idea if it can be done. Just asking.
  5. When I think of static, I think either a tube possibly dying, or a Cap or resisitor charging . My old Tweed amps and blackface amps do this when I have not played them in a long time. Leave the amp on for a couple of hours. If the static is is still happening, tap the hot tubes with a chop stick. That will lead you to a faulty tube. Hope this helps.
  6. I have been using a Visual Sound Open Road and Son of Hyde pedals with two Epi extention cabs. Sound's fine to me!
  7. A low watt celestion (greenback) will give more mid-range and quicker break-up. Can I have your Lady Luck when you replace it? haha
  8. I have done two rehearsals, and two gigs with this set up. I am ready to sell off my other amps (maybe not all of them). This Valve Senior set up, has proved its self.
  9. The ceiling fan in the room I was playing my amp was causing my Valve senior to crackle. Thought it was my pedalboard. After a few minutes of deducting, I turned the fan off.......crackle gone.
  10. No. Just two speaker cables. One cable out of the amp, and another cable out of the cabinet to the second cabinet. That would make it an eight ohm load, out of the amp.
  11. I switched out the Pre's. V1=Mullard, V2=JJ, V3=JJ 12AT7. The biggest change....The gain. Not input gain, but the overdrive. A little cleaner.
  12. Yeah, I am using two VJ cabinets (16ohm each). With both cabs plugged in, I would use 8ohm out of the Amp. Just a single VJ cab, I would plug into the 16ohm out of the amp.
  13. Thank you. Here are the pic's. This would be parellel, Correct?
  14. I am pretty sure it is Parallel. Grounds to grounds, Hot to hots. How do I post pic's?
×
×
  • Create New...