Jump to content
Gibson Brands Forums

i Can Tuna Guitar

  • Content Count

  • Joined

  • Last visited

Community Reputation

-2 Poor

About i Can Tuna Guitar

  • Rank

Profile Information

  • Gender
    Not Telling
  1. I'm fairly knowledgeable about guitars, but I made the same "mistake" thinking that replacing tuners would help. I replaced a set of no-name tuners with brand new Grovers, and it changed NOTHING. I've yet to determine what the problem is (the guitar itself may be just a bit more unstable than my others), but the tuning machines weren't it.
  2. The "Les Paul" type bracket should work fine.
  3. I don't know jack about effects processors and the like, but I do have something for you to consider regarding your desire to differentiate the Sheraton and the Dot, and that is P90 pickups in one of them. That would be a real and distinctly noticeable change, whereas different humbuckers will probably yield a much smaller, more subtle difference (and maybe not enough "improvement" to justify the cost and effort). I have GFS Mean 90s in my Dot - they are VERY different from the stock humbuckers, and to my ears they sound excellent.
  4. http://www.epiphone.com/default.asp?ProductID=76&CollectionID=9 That's it on the Epi site
  5. Fact: Genuine Epiphone factory seconds have "2ND" stamped on the back of the headstock, the serial number is NOT obliterated, the guitar is fully covered under the warranty for defects that affect playability. Fact: Guitars stamped "USED" are factory rejects/repaired items that are NOT covered by the warranty.
  6. Some..... For sure, it won't hurt to wait a bit. During that time, you can try to assess better what's causing the excessive fret buzz. Assuming there's nothing structurally wrong with the guitar (high frets, twisted neck), the causes of "abnormal/excessive" fret buzz may be any one or a combination of: - Action too low - Neck back-bowed or too straight (slight relief is commonly desirable) - Too-low nut slots (would mainly cause problems with open string buzz)
  7. There are multiple possible causes of fret buzz, so it's impossible at this point to advise you. But let's continue by asking you a question: What is the action at the 12th fret? Edit: If you haven't replaced the factory strings yet, you should oughta do that first.
  8. Loosen the strings before trying to adjust the bridge.
  9. ....because, like I've mentioned before, most Epi Electrics are simply minor variations of one another. I've played many Epiphone guitars, and the similarities far outweigh the differences, especially if they come from the same factory. Does anyone actually believe that Qingdao makes different necks for Les Pauls and Dots, for example? (the neck on my DW Dot Studio feels exactly like the neck on my friend's DW LP standard) So, what do you have - same neck, same electronics (OK, the LP has the hot bridge pickup), same hardware. The only real difference is the body, that's all. Believe what you
  10. Pots - CTS 500K Audio/Log taper (you'll need USA knobs) Switch & Jack - Switchcraft Caps - Orange Drop .022 The above list would probably be the most commonly recommended. The CTS pots have a bigger shaft than stock, so the holes in the top of the guitars (potholes?) must be reamed out a bit. The individual parts can be gotten for as little as $30-40; pre-wired assemblies can be over $100. AllParts, Stewart Macdonald, and other online retailers carry this stuff in stock. And here's a link to a handy how-to video: http://www.mojotone.com/iMojo-Videos/Installing-a-Mojotone-335-Asse
  11. The Epi website states, "3-piece maple". http://www.epiphone.com/default.asp?ProductID=8&CollectionID=1
  12. Seems to me that the neck needs to be shimmed for the proper angle, which is less drastic than grinding hardware. And I often suspect that many players have "experienced" intonation problems only after visiting guitar forums and seeing all the posts about intonation, how to check it, how to correct it, etc.. Then they buy themselves a high-end tuner and drive themselves crazy trying to get their guitar to intonate perfectly, WHICH IS VIRTUALLY IMPOSSIBLE. There are zillions of guitars that don't have adjustable bridge saddles, or even any bridge compensation, yet play perfectly fine.
  13. Why don't the British make computers? Because they couldn't find a way to make them leak oil. Honda!
  14. Regarding pickup height, here ya go: http://www.gibson.com/en-us/Lifestyle/Features/Tone%20Tips_%20Pickup%20Heights/
  • Create New...