Jump to content
Gibson Brands Forums

marco1996

Members
  • Content Count

    9
  • Joined

  • Last visited

Everything posted by marco1996

  1. hello, i would buy my first gibson sg guitar. I have seen two guitar the SGJ and the SG 60s tribute. I like the SGJ, but i have smallest hands so i need a slim neck. has The SGJ 60 slim neck? Gibson said that he is a 50s rounded, which are the different between the 50s rounded and the 60 slim neck? on Musiczoo they say that the guitar has a 60 slim neck (http://www.themusiczoo.com/product/16586/Gibson-SGJ-Electric-Guitar-White-Trans/) which site say the true?
  2. marco1996

    SGJ

    salve ero interessato all'acquisto della sgj, ma volevo sapere come qualita a che livello siamo e inoltre se è di gran lunga meglio (considerando che la cosa che mi interessa di più di una chitarra, l'estetica apparte) la sg 60 tribute considerando che tra le due vi è un sovraprezzo di circa 200€
  3. I have searched but i didn't found them. all pickup rings on ebay have 46 mm height. Instead the others that have 44.6mm height but have only 89 mm lenght, My pickup rings have 91 mm lenght. If i take the seconds, which have only 89 of lenght (are 2 mm smaller than the others), could they fit? (i contact the seller and he answered me giving me the distance between the four mounting holes, which is the same of mine).
  4. which are the dimensions of gibson pickup ring? this should fit? http://www.allparts.com/Humbucking-Pickup-Rings-Slanted-Black-Plastic-p/pc-0743-023.htm they are 1-3/4" and 3-1/2". (44,5mm X 89mm)the height is ok, but they are smaller than now for 2mm. if they are the same height but are less lenght should they fit?
  5. the maesurement of mine are 81mm X 37mm hole mounting space 92mm X 44,7 (about 45mm) external at gresygrover have a pickup ring for epiphon ebut the dimensions are too big. i have g400 pro, is possible that it has gibson pickup ring? which are the dimension of pickup ring gibson?
  6. I have on my G400 pro a broken pickup ring, so i would change it. Do gibson fit? Where can i find them? on allparts?
  7. 2-7/8 is 73,025, i think the distance of the posts is 2-29/32",like here, isn't it? the pickguard si very difficulty to found, beacause the productor given't you the specific so you don' know if it will fit on your guitar.
  8. I have an old G-400 SG epiphone, but i must repair it. The parts that i must change are: - Bridge (tune-o-matic and Tailpiece) - Turners - Mounting ring - Knobs - Pickguard For the bridge i must search a 2-29/32" (73.66) or a 2,913" (73.99 mm) Metric bridge? which is the correct? I have already found the turners. The gibson mounting rings and knobs doesn't fit. so i must search it online. I think i can found them on ebay. The principal problem is the pickguard, the gibson pickguard doesn't fit so i decide to have a personal pickguard made by a liuther. did you know if some shop have an SG G-400 Pickguard?
×
×
  • Create New...