Jump to content
Gibson Brands Forums

engenheiro5

All Access
  • Posts

    16
  • Joined

  • Last visited

Everything posted by engenheiro5

  1. Hi Guys, I measured the DC resistance and I got for the 490R 7.45 kO and 13.30kO in the 498T, I saw in the internet for the 490 R values should be 7.2 to 7.83, and the 498T 12.32 - 13.46 So it's all in the same parameters, any sugestions?
  2. thanks for the reply cjsinla and DiamondJig Going to measure everything. Hope I find the problem. I'l post the results thanks!!
  3. Also qualified tech's don't exist where I live :-):
  4. No way should a 498T be less output than the 490R. The 498T is a beast at 14+ ohms. Don't know what your true story is, did you just get this guitar or had it and this just happen or maybe your just troll'n and try'n to get hits on you link / Thanks for the reply. Man no kidding I normaly use the volume on the bridge at 10 alternating with the neck at 5, to get that dynamic shift. I got the guitar new a year ago, and the bridge pu never sounded that great, to the point that I now almost always use the neck pu. So I taught that it was the way it's supost to be, but recently it got lower and lower, so it must be a problem..
  5. Thanks m8 I'm going to check it, as soon as I know how. Yes they are covered. I'm starting to thing it might be related to sweat. I sweat a lot live, and I reck strings rapidly.
  6. Thanks for the reply 1.I checked the height of both pu's and regardless of the position the bridge is always lower 3.Stock pu's. The wiring is the new kind and it seems to be fine
  7. Hi Guys! first post here! I wonder if you guys could help me. The bridge pick up on my 2011 Standard SG has a much lower output (regardless of the height) then that of the neck. Can any one help. Thanks!!! http://www.youtube.com/user/selfassistance?feature=mhee
×
×
  • Create New...