Jump to content
Gibson Brands Forums

2000 lp classic

All Access
  • Posts

    12
  • Joined

  • Last visited

Everything posted by 2000 lp classic

  1. My 2000 les paul classic has a dark grey paste like substance over the wood,but only the bottom,and then there is a metal plate that the pots all are mounted too.Did Gibson use shielding or some type of paste or paint on the bottom of the control cavity?because its not bare wood and the sides are painted red like the color of the mahogany,or cherry sunburst.If I shield the plastic covers will it help with the crackling and pops?
  2. I have a 2000 Gibson Les Paul classic.Some posts say it was afer a certain year,but my axe is a 2000,its 19 yrs old.Ive read that if its buzzing and you touch the tail peice,the bridge,the strings(because obviously they go thru the tail peice and ride on the saddles of the bridge that everything on the outside is grounded.(Does a abr-1 or nashville bridge make it different in anyway,I don't know because the way each are mounted differently)Also the tunner peg holes that the strings are wrapped around are grounded.I took it to gc and he ran a wire from one pot to the next type thing.In the store it was fine,at home it still humed,so i took a multimeter and touched the leads to the wires he soldied,and then unsoldierd each one,and it beeped the same,after desoldering all the wires everything was grounded good.WHY WOULDNT HE USE A MULTIMETER?He Didnt notice the plate each pot was on?He is the tech,not me.He made a quick $10.00 and now my wiring doesnt look original because you can see the difference in the soldier color and Now I need to get some wick to hopefully remove ugly left over soldier,also the tailpeice to the tunner peg holes all all beeped clearly. Ive also read that if there is a hum and you touch anything thats grounded and it silences the hum that its grounded good.Now with the crackle and pop noise from rubbing my hand over the rear covers,I have no idea what to do but maybe use shielding tape and maybe run a peice from the metal plate and run the shieldind around where the plate lays on and that would be grounded also then......will this help? Like the back of a strat pickgaurd? Im frustrated as many are.Some Gibsons didnt even have the plate obviously,so they needed each pot to be soldiered together,also some didnt have a ground going from one of the pots to the pressed in tailpeice bushing that the tailpeice studs screw into. Thru the years they changed it alot,now everyone has a different answer to questions that are still unknown.Ive heard that the nitro finish,or clearcoat builds up static and that causes the crackling and popping.IM FRUSTRAITED,I COULDA GOT A FENDER,A PRS,OR A CUSTOM BUILT GUITAR,BUT I CHOSE THE GIBSON.MY DADS FRIEND BOUGHT IT IN 2001,AND IVE HAD IT FOR ABOUT 3 YRS,BUT NEVER NOTICED THIS.WHY IS IT DOING IT NOW?deoxit d5 didnt help,I cleaned the jack of guitar and amp,I cleaned the pots on the guitar and amp.Im lost,I LOVE MY LESTER๐Ÿ˜”
  3. Hello there, ive also joined just to have conversations about Gibsons,and all thoughts on guitars and guitar parts. I hope everyone has a rockin day......๐ŸŽธ๐Ÿ”Š๐ŸŽต while playing a Gibson๐Ÿ˜‚๐Ÿ‘Œ
×
×
  • Create New...