Search the Community
Showing results for tags 'volume knob'.
Found 4 results
-
Hi. I made an schematic image that illustrate a 1 pickup, 1 Volume diagram for a guitar in that style, eg. almost a Jr. except for the absence of the Tone knob. 1. Add a capacitor to convert the Vol. pot to a Tone Pot. Which lugs should be soldered? 2. Treble Bleed, cap + resistor. Which lugs should be soldered? For either 1. & 2. , should the wirings be modified?
-
Hi everyone! First of all apologies if the section is wrong, wasn't sure where to post. I have this weird problem with my Gibson LP standard 2017. Apparently the neck volume has some weird issue. When I turn the knob down to 9/9,5, it starts buzzing and the volume itself drops dramatically. As I keep turning down, this stops from happening (please see the video below, it is clearer). Did anyone experience something similar before? Any ideas of what the problem could be and how to solve it? I’m literally crapping myself, as if there’s a problem with the push-pull board, it’s £300 flying away.... Here’s a video: https://streamable.com/v0iyp -
Hi everyone! First of all apologies if the section is wrong, wasn't sure where to post. I have this weird problem with my Gibson LP standard 2017. Apparently the neck volume has some weird issue. When I turn the knob down to 9/9,5, it starts buzzing and the volume itself drops dramatically. As I keep turning down, this stops from happening (please see the video below, it is clearer). Did anyone experience something similar before? Any ideas of what the problem could be and how to solve it? I’m literally crapping myself, as if there’s a problem with the push-pull board, it’s £300 flying away.... Here’s a video: https://streamable.com/v0iyp
-
I just purchased a 2006 Epiphone G400 Custom. One of the volume knobs was cracked, so I am trying to find replacements. I know Epiphone uses the metric 18 coarse-spline split shaft pots, and that is the case with this guitar. They are not the imperial 24 fine-spline pots. The amber knobs I purchased are consistent with that - 18 coarse-spline - but won't fit past the very top of the pot. One of the pots already had the shafts pushed together, so that's already been tried. The original black knobs still go on and off every pot interchangeably with no fuss. Any ideas?
