Help with quick connect

[Wynken d' Wilde]

I have a les Paul with a quick conect PCB with coil tap, and a three wires connector, how i solder the pickup cables to the connector, in wich order, its the gibson 57

[cjsinla]

Is it three or four wires? They do make Classic 57's with quick connect if you don't want to solder.

[GibSinCity]

http://store.gibson.com/quickconnect-trade-pickups/

 

[cjsinla]

http://store.gibson....-trade-pickups/

 

 

Look at that, only two wires!!

[Wynken d' Wilde]

sorry i dint explain correctly, my humbeckers has 4 wires, plus the ground, and the PCB only has a 3 wires connector, i attach the pictures

[Greg Jacob]

Assuming it is Red, Green, White and Black... The green and white go together for the coil tap plug, the red is hot and the black is ground.

 

http://www.stewmac.com/freeinfo/Electronics/Color_codes/i-gibson.html

[Wynken d' Wilde]

And the order in the connector? how can a i know the right order

[Greg Jacob]

And the order in the connector? how can a i know the right order

 

Follow the circuit board. The hot should go to the tone cap/volume, the coil tap goes to the push-pull and ground goes to common ground.

 

Also, look at the pickup you took out. I doubt Gibson is going to change the colors.