Jump to content
Gibson Brands Forums
Sign in to follow this  
djmatzlo

Problem with Microphone and Tone

Recommended Posts

Hello,

 

The stantondj homepage says, that the technical specification for the DJC.4

have an "1-Balanced (1/4" TRS) Microphone Input w/ volume & tone control"

 

But i don't find a tone control for the mic and nothing read about

in the manual :( How can i use the high, mid and low equilizer on the mic

or where can i find the tone control?

Share this post


Link to post
Share on other sites

Hello,

 

The stantondj homepage says, that the technical specification for the DJC.4

have an "1-Balanced (1/4" TRS) Microphone Input w/ volume & tone control"

 

But i don't find a tone control for the mic and nothing read about

in the manual :( How can i use the high, mid and low equilizer on the mic

or where can i find the tone control?

 

You should be able to route the input of the 1/4" Mic on the front (which has gain) to Channel 2 (and switch the input from the sofware audio signal to the hardware - microphone) so you can have tone controls.

Now depending on what software you have you can also route this differently and not have to worry about the physical channel input switch.

 

Hope this helps,

GPA~DJ

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...