Jump to content
Gibson Brands Forums

Blueshawk Problem


donsturdy

Recommended Posts

Can anyone give me any explanation and possible fix for Fret Buzz on the following strings:

 

-Low E string-major buzz whether playing soft of hard with and without fretting.

-A string only when fretting. Soft or hard playing no difference.

-G string when fretting to a lesser extent than the other 2 strings.

 

Any suggestions or fixes would be most appreciated.

 

Thanks in advance for reading and hopefully replying.[/size]

Link to comment
Share on other sites

First you need to check the neck to see if the truss rod needs adjusted. Hold your E string down at the first and last frets. Should have about .015" (1/64") of clearance over the middle of the neck (about the thickness of a credit card). If it's touching the frets then the truss rod needs adjusted. If it's buzzing only on certain frets then you need to take a ruler and lay across the buzzing fret and see if it is higher than the surrounding frets.

Also, are you tuned to standard 440 or tuned lower? It makes a difference on how much tension is exerted on the neck.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...