mking Posted May 5, 2014 Posted May 5, 2014 I have a 2007 J-45 TV with the K&K mini pups installed and I'm going through a Baggs Venue DI. If any of you have this same configuration I would like to know what settings you have on your DI. I would appreciate it. Michael
craig_no Posted October 9, 2014 Posted October 9, 2014 Just saw your post while doing a search and thought maybe it would help, even though it is for a different pickup ... I read this advice somewhere for Baggs Lyric and the Venue. I am planning to put a K&K in my J-45 in a couple of days, and have a Venue too, so we'll see. "Bass knob roll off to about 10 o'clock. The two mid knobs down to 9 o'clock centered around 400Hz and 600Hz respectively. The Presence and Trebles were up to around 1 o'clock." Good luck!
ServantOfGod Posted October 9, 2014 Posted October 9, 2014 I'm also using the Venue with the L.R Baggs on my J-45 and Hummingbird, and I am happy with the sound. I've been reading about how well K & K and hummingbird works together. So maybe install this in the future. It would be nice if you can post some audio clips. Thanks!
Jeremy Morton Posted October 9, 2014 Posted October 9, 2014 Start out with setting the gain properly, then start with the EQ knobs at 12 o clock (flat). I will adjust a little up or down depending on what is happening in the room. As far as the notch filter below the EQ I always have that off unless I have feedback issues. rule of thumb is that it is better to take away a little in EQ'ing rather that adding, adding adding. Setting the bass and mid at 9 & 10 makes no sense to me? too much cutting. Venue DI is a great pedal!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.