Mezzamort Posted January 4, 2017 Share Posted January 4, 2017 Will P-90s from a 2116 LP studio fit in a 2011 LesPaul Mahogany Exclusive with 490r and 498t PU's ? Link to comment Share on other sites More sharing options...
american cheez Posted January 4, 2017 Share Posted January 4, 2017 with a hammer, screwdriver, and duct tape, you can make almost anything fit Link to comment Share on other sites More sharing options...
Rabs Posted January 4, 2017 Share Posted January 4, 2017 If only it were that easy we would all do it :) Link to comment Share on other sites More sharing options...
jaygl Posted January 4, 2017 Share Posted January 4, 2017 The answer to your question is no. P90,s have a smaller route than the full sized hum buckers. Link to comment Share on other sites More sharing options...
pippy Posted January 4, 2017 Share Posted January 4, 2017 It should be perfectly possible to adopt the 'Goof- (or Boo-Boo) Ring' solution chosen by Gibson themselves many decades ago when they had 'bucker-routed LP bodies which they wished to equip with P-90s (and the Epi mini-hums to create the DeLuxe). http://home.earthlin...r-pickguard.jpg http://photos.imagee...ebsize/face.jpg There was a thread many moons ago where it was mentioned that All-Parts had them but after a (very brief, admittedly) look I couldn't see any being offered. Still; they don't look too difficult to fabricate for anyone with a bit of gumption and some spare sheets of plastic... Just a thought! Pip. Link to comment Share on other sites More sharing options...
Paul001 Posted January 5, 2017 Share Posted January 5, 2017 google Link to comment Share on other sites More sharing options...
merciful-evans Posted January 11, 2017 Share Posted January 11, 2017 with a hammer, screwdriver, and duct tape, you can make almost anything fit You've seen my Lescaster then? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.