SteveFord Posted July 4, 2017 Share Posted July 4, 2017 My Lucille has a problem with how the Varitone/stereo is wired up. There's two input jacks and when I use the lowest jack the Varitone and bridge controls work perfectly. The neck pick up is inoperable. When I use the top jack the bridge pick up volume knob works like a half assed tone control, the neck pick up works perfectly. There's a wire hooked up wrong but I don't know which it is. After poking around a bit, maybe what I really need is some advice on stereo to mono cables/boxes to use this guitar properly with a single amp. Link to comment Share on other sites More sharing options...
charlie brown Posted July 4, 2017 Share Posted July 4, 2017 Hmmm, with mine, the bottom jack is mono, and the Varitone, and Both pickups work, as with any other mono guitar. A stereo, or "split" cord is needed to use the upper input correctly. IF you're saying that a mono cord, into the lower mono jack, still doesn't give you all access, to both pickups, and Varitone use, there's something "amiss!" I'd take it to a good Luthier, along with the proper schematic, and have him check it out. Unless, you are very familiar with electronics schematics, and can do the trouble shooting/repair yourself. Good Luck, Steve...hope you find the problem and get it resolved! CB Link to comment Share on other sites More sharing options...
SteveFord Posted July 4, 2017 Author Share Posted July 4, 2017 The more I mess around with plugging the cord in half way into the jacks the more convinced I am that this one is wired for stereo only. Retired said that he tried one and couldn't get things to work properly, I wonder if he didn't get one wired without mono capability as well. Link to comment Share on other sites More sharing options...
charlie brown Posted July 4, 2017 Share Posted July 4, 2017 The more I mess around with plugging the cord in half way into the jacks the more convinced I am that this one is wired for stereo only. Retired said that he tried one and couldn't get things to work properly, I wonder if he didn't get one wired without mono capability as well. Interesting! I've owned my Lucille since 2002, and previously I owned a ES-355 Stereo (1968 model), and my "Lucille" works identically, to my old '68 ES-355 Stereo. So, either Gibson changed "spec's" that way (which they've been known to do), or previous owners, changed things around, themselves? Was your's purchased new, or used? Was the one that "Retired" played, a new one, or used? Even my Ric's, which are "Stereo," have a mono plug, as well. So...??? CB Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.