slk Posted April 29, 2018 Share Posted April 29, 2018 Does any know if the 2 bridge post with the thumb wheel that go into the body of an Epiphone would be the same as a Gibson? Reason for asking is that I have an Epiphone that the bridge post slotted head was buggered up. I called Epiphone and they sent me 2 new ones but they are not slotted and are allen heads. These are the small post that go into the body. The guitar is setup great right now but will change out the parts when a setup is needed again. I just wanted to make sure the threads were the same so I do not have to change out the knurled plug that goes in the body. So I am not quite sure if Epiphone and Gibson use the same threads (SAE or Metric) Thanks Steve Link to comment Share on other sites More sharing options...
Megafrog Posted April 29, 2018 Share Posted April 29, 2018 They are different Link to comment Share on other sites More sharing options...
captainjack Posted April 29, 2018 Share Posted April 29, 2018 The Epiphone ones are metric. Link to comment Share on other sites More sharing options...
slk Posted April 30, 2018 Author Share Posted April 30, 2018 I did check the new ones and they are in fact metric. 4 X.07 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.