Jump to content
Gibson Brands Forums

Toggle switch washer HELP


ShimJim
 Share

Recommended Posts

I just bought the rhythm-treble toggle switch washer for my 2017 Tribute and it wont fit because the plastic washer is too thick and the . Any thoughts on how I can make it fit? I was thinking of using sandpaper to thin it out but it might ruin the finish once i put it on.

Link to comment
Share on other sites

open the back toggle switch cover..

you should see a nut on the inside that is the adjustment height of the threads on the top side.

take the top nut off.. semi-remove the switch from the cavity , "lower" the inside nut which should expose more threads of the switch.. reinsert and add your poker chip and top side nut.

repeat as needed

 

I just bought the rhythm-treble toggle switch washer for my 2017 Tribute and it wont fit because the plastic washer is too thick and the . Any thoughts on how I can make it fit? I was thinking of using sandpaper to thin it out but it might ruin the finish once i put it on.

Edited by Eracer_Team
Link to comment
Share on other sites

open the back toggle switch cover..

you should see a nut on the inside that is the adjustment height of the threads on the top side.

take the top nut off.. semi-remove the switch from the cavity , "lower" the inside nut which should expose more threads of the switch.. reinsert and add your poker chip and top side nut.

repeat as needed

Alright will do. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...