Jump to content
Gibson Brands Forums
Sign in to follow this  
Damocles

Wiring; help with Buzz!

Recommended Posts

I recently built myself an "Epiphone Casino" using a bolt on neck from an early 70s Japanese Epiphone acoustic and a blank ES335 style body. I decided to make it real simple and gave it one pickup with one volume and one tone pot. The pickup is a Kent Armstrong slimbucker (two terminals which, according to the instructions can be either hot or ground). Once I got it all wired up it played great and sounded good but I found that it was buzzing. Not when I touched the jack plate or the metal Q-Part control knobs. In fact, that's when the buzzing stopped. That's the key; it doesn't buzz when I touch metal but stops buzzing when I do).

 

I grounded the pickup and the jack plug to the back of the volume pot. I also ran a ground wire from there to the bracket that holds the pickguard figuring that would be my body ground. The bridge is not grounded so there is no buzz canceling when it, the strings or tuners are touched. Someone suggested I ground the bridge and so I experimented by running a temporary jumper from the bridge to the pickguard mount but it made no difference. Should I disconnect the pickguard mount and run that ground to the bridge and how would that cancel the buzz? That would also involve removing the bridge to drill a hole to channel the wire so I'd like to know if that should cure the problem before I undertake such a task...

 

Just wondering if anyone could tell me what I might be doing wrong?

 

IMG32222.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...