charlie brown 775 Report post Posted October 8, 2018 Hi All, My "Lucille" pickguard has come apart! That is, the multi-ply binding on the outside edge, as come completely off! This occurred, while stored in it's original case. Last time I had it out, it was "fine!" When I went to get it out, to play it, a few days ago...I opened the case to find the pickguard's binding, down on top of the body's lower bout. So, I need a replacement, as I live (in the "sticks), and hours from the nearest Gibson dealer or repair facility. I've notified Gibson's CS, and the Repair/Restoration folks, but...as of yet, no response. HELP!!! :unsure: CB Quote Share this post Link to post Share on other sites
charlie brown 775 Report post Posted October 10, 2018 Which color do you have? Mine is the red one. I hated the tortoise one that came with it and replaced it with an black aftermarket one I got of I believe Angela's Fender site. https://i.imgur.com/7EojopJ.jpg Mine is the standard "Ebony"= Black! :) CB Quote Share this post Link to post Share on other sites
kaicho8888 34 Report post Posted October 10, 2018 (edited) http://www.youtube.com/watch?v=mqQU15J8GXU If the 5 ply binding strips are still in good shape, you could re-glue them. I don't know if you can still buy Ambroid cement in the US. I've used Duco cement in my younger days building RC planes, etc. I'd better check my Lucille... been years since I've opened the case... Edited October 10, 2018 by kaicho8888 Quote Share this post Link to post Share on other sites
kaicho8888 34 Report post Posted October 10, 2018 (edited) Here is one place I found that looks like the original with the thick 5 ply bindings around the edges. Didn't see any black pickguard; but it appears you can custom order. Good luck and please post your source. My link Edited October 10, 2018 by kaicho8888 Quote Share this post Link to post Share on other sites
charlie brown 775 Report post Posted October 10, 2018 (edited) Thanks, ALL, for your suggestions. I have several options, at this point. And, some good folks, I know, looking into a possible replacement, from Gibson. So, we'll see what happens? Appreciate the continuing feedback! Cheers, CB Edited October 10, 2018 by charlie brown Quote Share this post Link to post Share on other sites
kaicho8888 34 Report post Posted October 10, 2018 Cases are for transport. Why is that guitar not in your hands. too many guitars; too little time! Quote Share this post Link to post Share on other sites
charlie brown 775 Report post Posted October 11, 2018 Just found out, that Gibson will replace my pickguard, under warrantee! Many Thanks, to Gibson Repair/Restoration! CB Quote Share this post Link to post Share on other sites
kaicho8888 34 Report post Posted October 12, 2018 Just found out, that Gibson will replace my pickguard, under warrantee! Many Thanks, to Gibson Repair/Restoration! CB That is good to know. Quote Share this post Link to post Share on other sites