justtryme Posted February 28, 2019 Share Posted February 28, 2019 To upgrade or not to upgrade on your custom shop guitars. Chime in. JTM Link to comment Share on other sites More sharing options...
deeman Posted February 28, 2019 Share Posted February 28, 2019 You're free to do what you like, but if I were spending that much for a guitar, it better not need new pickups or anything. Hard no. Link to comment Share on other sites More sharing options...
justtryme Posted February 28, 2019 Author Share Posted February 28, 2019 You're free to do what you like, but if I were spending that much for a guitar, it better not need new pickups or anything. Hard no. Oh this ones needs new pickups burstbuckers are way too bright in this guitar and it will sound better with a darker set that I have Link to comment Share on other sites More sharing options...
kidblast Posted February 28, 2019 Share Posted February 28, 2019 There are no rules here. If you can make it more what YOU want, do it and no looking back. I had the first gen Burst Buckers in one of my LP Standards, I put a set of Duncans in there, a better fit for me. I'm considering going in there again, but this time, classic 57 and 57+. I like that set up. My only advise, which is rather obvious; SAVE everything you swap out. if ever you need restore it back if you someday, aka decide to move on from it. I sold the burst buckers, and later, wished I had not. too late now! Link to comment Share on other sites More sharing options...
arcticsg Posted February 28, 2019 Share Posted February 28, 2019 1551381765[/url]' post='1980293']There are no rules here. If you can make it more what YOU want, do it and no looking back. I had the first gen Burst Buckers in one of my LP Standards, I put a set of Duncans in there, a better fit for me. I'm considering going in there again, but this time, classic 57 and 57+. I like that set up. My only advise, which is rather obvious; SAVE everything you swap out. if ever you need restore it back if you someday, aka decide to move on from it. I sold the burst buckers, and later, wished I had not. too late now! Good call! Link to comment Share on other sites More sharing options...
NighthawkChris Posted February 28, 2019 Share Posted February 28, 2019 Oh this ones needs new pickups burstbuckers are way too bright in this guitar and it will sound better with a darker set that I have Like kid said, and be careful soldering! Nothing worse than a hack job. Not saying you will do this as you may be very proficient with the iron and know exactly what you are doing, but again, nothing worse than a hack solder job and melted wire insulation in a nice guitar... Link to comment Share on other sites More sharing options...
rct Posted February 28, 2019 Share Posted February 28, 2019 How can a Historic, more accurately historically accurater than ever before, as they get every single year since they started doing them, not sound like a 58? The actual guitars that these are supposed to be so incredibly accurate reproductions of weren't too bright, at least, not the ones I played. rct Link to comment Share on other sites More sharing options...
justtryme Posted February 28, 2019 Author Share Posted February 28, 2019 How can a Historic, more accurately historically accurater than ever before, as they get every single year since they started doing them, not sound like a 58? The actual guitars that these are supposed to be so incredibly accurate reproductions of weren't too bright, at least, not the ones I played. rct This one is. clearly. I have played 3 real 59's. I know what I want. Its not that. They have a really fizzy top end that does not sound like the originals in this particular guitar as well as another Historic I own. Link to comment Share on other sites More sharing options...
NighthawkChris Posted February 28, 2019 Share Posted February 28, 2019 http://www.youtube.com/watch?v=lNbkSgEaDZ4 Link to comment Share on other sites More sharing options...
Black Dog Posted February 28, 2019 Share Posted February 28, 2019 There are no rules here. If you can make it more what YOU want, do it and no looking back. I had the first gen Burst Buckers in one of my LP Standards, I put a set of Duncans in there, a better fit for me. I'm considering going in there again, but this time, classic 57 and 57+. I like that set up. My only advise, which is rather obvious; SAVE everything you swap out. if ever you need restore it back if you someday, aka decide to move on from it. I sold the burst buckers, and later, wished I had not. too late now! +1 on all that. Link to comment Share on other sites More sharing options...
JSW Posted March 1, 2019 Share Posted March 1, 2019 On a Historic? Hell no. It comes down to value. As soon as you make the change you loose monetary value. IMHO. On a custom shop I might. As stated above, keep the old pickups and go carefully. You’ll alter the value but not as much as you would if it was Historic. My two cents. Jim Link to comment Share on other sites More sharing options...
Black Dog Posted March 1, 2019 Share Posted March 1, 2019 On a Historic? Hell no. It comes down to value. As soon as you make the change you loose monetary value. IMHO. On a custom shop I might. As stated above, keep the old pickups and go carefully. You'll alter the value but not as much as you would if it was Historic. My two cents. Jim I hear ya, but what is the value of the guitar if he doesn't like way the way it sounds? Link to comment Share on other sites More sharing options...
bigtim Posted March 1, 2019 Share Posted March 1, 2019 So what would happen if the OP does change it out for himself and keeps the original stuff in a box somewhere if the guitar will sound better after the alteration? It is his guitar and if he is planning on keeping it what difference does it make? I am thinking of putting an upgraded pre wired set of emerson pot harness in mine with different caps. I do not see the big deal if the OP is going to keep the guitar. Link to comment Share on other sites More sharing options...
Black Dog Posted March 1, 2019 Share Posted March 1, 2019 I am thinking of putting an upgraded pre wired set of emerson pot harness in mine with different caps. I have Emerson Pro pots in a couple of my guitars. There are good quality but I don't like the taper they use. I believe it is a 30/50 taper. That is 30% max output at 50% rotation. That's almost linear. I like a deeper taper. I think the Gibson historic's pots are a 10/50 taper. It doesn't matter as much for the bridge p/u for me because I keep that up pretty high, usually 7-10 range and the higher you crank it the less of a difference there is. But, for the neck p/u which is much more sensitive it really makes a difference. On my Emerson guitars I usually have the neck volume pot on 2-ish where for my Gibson pot guitars are around 4- ish for the same output. Look at the different resistance tapers on the CTS site: https://www.ctscorp....ploads/450G.pdf Link to comment Share on other sites More sharing options...
bigtim Posted March 1, 2019 Share Posted March 1, 2019 I have Emerson Pro pots in a couple of my guitars. There are good quality but I don't like the taper they use. I believe it is a 30/50 taper. That is 30% max output at 50% rotation. That's almost linear. I like a deeper taper. I think the Gibson historic's pots are a 10/50 taper. It doesn't matter as much for the bridge p/u for me because I keep that up pretty high, usually 7-10 range and the higher you crank it the less of a difference there is. But, for the neck p/u which is much more sensitive it really makes a difference. On my Emerson guitars I usually have the neck volume pot on 2-ish where for my Gibson pot guitars are around 4- ish for the same output. Look at the different resistance tapers on the CTS site: https://www.ctscorp....ploads/450G.pdf Thanks for sharing. But since you have said your not thrilled with the performance.....what alternative would you recommend? I am not very familiar and I would like a quick swap. I know how to solder the stuff in but prewired one seems really tempting. Link to comment Share on other sites More sharing options...
Black Dog Posted March 1, 2019 Share Posted March 1, 2019 Thanks for sharing. But since you have said your not thrilled with the performance.....what alternative would you recommend? I am not very familiar and I would like a quick swap. I know how to solder the stuff in but prewired one seems really tempting. Well, even with a "pre-wired" harness there's still a fair amount of soldering. It doesn't really save you much. As for a recommendation, you'll have to look around. On the link to the PDF I posted it shows the tapers and also gives the code to read the pots. Not all pots have the codes though. The Gibson historics don't. Link to comment Share on other sites More sharing options...
arcticsg Posted March 1, 2019 Share Posted March 1, 2019 Totally your call... if what you've got is not working then go for it. ....or buy another Guitar! That's usually my plan of attack! ;) Link to comment Share on other sites More sharing options...
IanHenry Posted March 1, 2019 Share Posted March 1, 2019 Why not try using the tone controls on your guitar and amp? It's better to have some brightness on a guitar than non at all (I have played Les Paul's that were muddy on the neck pickup, if there is no brightness there at all your stuck with that!). The more variety of tone's you can call up the better. Regarding effecting the value of your guitar, I have a friend who makes his living out of dealing high value & vintage guitars (nothing below Custom Shop) and he always checks the solder joints to see if they've been disturbed, so even if you restore the original electronics, to him it still detracts from the value. Having said all that, it's your guitar. Ian Link to comment Share on other sites More sharing options...
pippy Posted March 1, 2019 Share Posted March 1, 2019 ...what is the value of the guitar if he doesn't like way the way it sounds?... ...Why not try using the tone controls on your guitar and amp?... Both of the above. I really couldn't possibly agree more with both points raised. I'm sure the OP knows what he is doing and if he really cannot dial-in the guitar with the hardware he has to hand then by all means swap them out but if it's just a case of the p'ups being too bright then I would have thought judicious use of the volume and tone control(s) would be sufficient in the treble-taming stakes. As far as what the original 'bursts sounded like? I won't post it yet again but I heartily recommend the April 2008 edition of ToneQuestReport to anyone curious enough to get an insight into the independent evaluation of six all-original '59s and how they sound. The evaluation was extremely thorough and well-conducted. The conclusion was that there is not one Absolute, Definitive tone. Les Pauls vary. They did so back then(*) and they still do today. Here are just a couple of quotes from the text to give you a general idea; "We all agreed that if we had heard (......) on a recording 'blind' we would incorrectly assume that we were listening to a semi-hollow body guitar...". "...a thin, penetrating and incredibly powerful treble presence far more likely to be associated with a vintage Telecaster...". So there you have it. A 1959 Les Paul sounds like an ES-335. Or, perhaps, an old Telecaster... Pip. (*) Without getting in to the interminable 'Do solid-body guitars improve with age?' argument Link to comment Share on other sites More sharing options...
kidblast Posted March 1, 2019 Share Posted March 1, 2019 Thanks for sharing. But since you have said your not thrilled with the performance.....what alternative would you recommend? I am not very familiar and I would like a quick swap. I know how to solder the stuff in but prewired one seems really tempting. Just another voice in the wilderness here; When I removed the BBs in my LP, and replaced them with Duncan's, the change in pickups, somehow changed how the stock volume pots behaved. I lost a lot of the response / control I was used to getting with the stock pickups. I replaced the pots w/Audio Taper CTS 500k and that restored the control I had before the pickup swap. Technically, the new pickups had everything to do with this but why, I just don't know. Link to comment Share on other sites More sharing options...
justtryme Posted March 1, 2019 Author Share Posted March 1, 2019 I can see the point of the originality and would have to agree. Iknow guys that if there are any disturbed solder joints, they dont want anything to do with it. They want an untouched all original guitar I get it. These days I have been going for guitars thats are keepers. slowly but surely. So Im not worried about the ones that I have swapped out. Although I keep them, I dont ever plan on selling the guitar. I supposed I have an oversensitive ear. I have sat in my studio with some colleagues and I tried to remove out the frequencies that I didnt like in the burst buckers. When I did the track sounded great. This is a personal preference. So ask yourself. How much is your guitar worth? Are you keeping it? Will you swap out the electronics and or pickups? To each their own. I have a historic with a boutique set of pafs. This guitar has never sounded this good ever. I would never take out this set of pickups in this guitar. It sounds magical. I have had close friends trying to convince me, dont change the pups. They are voiced for that guitar, and you should never change them. Then I let them hear in my recording what I hear. There response? I get it. Link to comment Share on other sites More sharing options...
Big Bill Posted March 1, 2019 Share Posted March 1, 2019 If that's your justification, sounds cool to me. My vote is to go for it. Link to comment Share on other sites More sharing options...
pippy Posted March 1, 2019 Share Posted March 1, 2019 If that's your justification, sounds cool to me. My vote is to go for it. Yep. I agree, too. You have obviously gone in to this in some detail so swap away. After all; it's just a guitar - not a Faberge egg. Pip. Link to comment Share on other sites More sharing options...
justtryme Posted March 1, 2019 Author Share Posted March 1, 2019 But at the same time I do laugh at myself. Because truly I sound the same through every guitar lmao. Its my ear that chooses what I pleasure. So with that in mind, and your swapping out.............. What pickups? and What harnesses, has anyone had excellent experiences with. Link to comment Share on other sites More sharing options...
kidblast Posted March 1, 2019 Share Posted March 1, 2019 Because truly I sound the same through every guitar lmao. well we ALL do.. so nothing of a mystery there. We're all trying to achieve the sound that's in our head.. {As long as I can keep those voices quiet long enough... :unsure: } Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.