Jump to content
Gibson Brands Forums
Sign in to follow this  
proceedeth

Problems with the Lee Malia Artisan series - seeking other's experiences

Recommended Posts

I spent a few weeks deliberating a purchase of the Lee Malia RD Artisan and eventually made the purchase. It's one I've come to regret somewhat; I've had two returns of the guitar. Has anyone had a positive experience or opinions they can share on the Les Paul, Explorer, or RD models?

 

The first RD came with barely functional tuners but the primary concern was a very high hum neck p90. The guitar is advertised as having a dummy coil so I felt sort of slighted when it was noisier than any of my other guitars when I A/B'd with the same amp settings. Epiphone directed me for a warranty repair to a local respect luthier; the luthier directed me to return the guitar in agreement the dummy coil was non-functional. Other issues were very scratchy frets and a pretty bad route job of the pickguard under the neck pickup with jagged edges and shards remaining from the cut. This guitar was returned and replacement sent. I don't feel I was too picky - I could of worked with the minor flaws but didn't want to attempt my own troubleshooting of the non-functional dummy coil and void the warranty.

 

The replacement guitar came with a tuner snapped in half (plastic shaft) and the same high hum situation. I've referenced another post on the forum and some had advised it came with a functional hum killing dummy coil or of further repairs that made it work. I'll be sending this one back in but now I'm nervous about receiving a 3rd and it's sort of killing the vibe and not sure I'm looking forward to the guitar anymore.

 

Can anyone chime in on the Artisan series and the dummy coil? I know the Les Paul is without but maybe other issues were experienced.

 

I also want to say this is my first import guitar and I really came to the conclusion to purchase with an open mind. I still have it but just getting bummed out, really (was) looking forward to rocking with this one.

 

Thanks!

Share this post


Link to post
Share on other sites

I'd like to update that I received a Lee Malia RD that I'm happy with but the issue still stands; it appears the dummy coil is non-functional. Can anyone chime in about their experiences or possible solutions? I do have a soldering iron and wouldn't mind trying a DIY fix! Thank you!

Share this post


Link to post
Share on other sites

There was a les Paul on the local Craigslist and that was the first I heard of the guy.

 

I had considered the explorer, because it was the same price as the regular epiphone.

 

My only hesitation is the fake p90 in the neck.

 

Dummy coils don't appeal to me, but a non functioning one sounds worse.

 

I have never had a qc problem with epiphone and if hate to start now.

Share this post


Link to post
Share on other sites

I'd like to update that I received a Lee Malia RD that I'm happy with but the issue still stands; it appears the dummy coil is non-functional. Can anyone chime in about their experiences or possible solutions? I do have a soldering iron and wouldn't mind trying a DIY fix! Thank you!

 

The Lee Malia RD and Explorer use the same electronics with Gibson USA P-94 and 84T-LM humbucker with coil-splitting, so you may also want to note what the "Lee Malia Explorer" owners are saying.. There have been reports of wiring mistakes which caused problems, usually in the form of noise.

 

I have 2 Blueshawks, one Gibson and one Epi, which are where the Dummy Coil was first introduced. The function of the Dummy Coil is to reduce hum when you are in single pickup mode, so when you have your neck P94 selected you should not hear a lot of noise because of hum canceling. The coil produces a field opposite the P94 effectively turning it into a really large humbucker, while still getting a P90 style sound and wide range of usable tone..

 

If you are getting a lot of noise when the neck P94 is selected, that would indicate that the dummy coil may not be wired in correctly..

Edited by mihcmac

Share this post


Link to post
Share on other sites

The Lee Malia RD and Explorer use the same electronics with Gibson USA P-94 and 84T-LM humbucker with coil-splitting, so you may also want to note what the "Lee Malia Explorer" owners are saying.. There have been reports of wiring mistakes which caused problems, usually in the form of noise.

 

I have 2 Blueshawks, one Gibson and one Epi, which are where the Dummy Coil was first introduced. The function of the Dummy Coil is to reduce hum when you are in single pickup mode, so when you have your neck P94 selected you should not hear a lot of noise because of hum canceling. The coil produces a field opposite the P94 effectively turning it into a really large humbucker, while still getting a P90 style sound and wide range of usable tone..

 

If you are getting a lot of noise when the neck P94 is selected, that would indicate that the dummy coil may not be wired in correctly..

 

I have a feeling there is a wiring issue. I wish I could find a schematic or reference pictures for how to double check! The hum goes from silent with the bridge pickup, to hum city in the middle position, to chernobyl melt down with the neck p90. I'd like to add that I typically like to play high gain amplifiers and the P90 hum is going to be amplified; I get it.... it's part of the package for having a P90. When turning the gain down to a clean sound the hum is still present and amplified partially in the middle and highly in the p90 position. Love this guitar so going to troubleshoot it all the way through!

Edited by proceedeth

Share this post


Link to post
Share on other sites

I have a feeling there is a wiring issue. I wish I could find a schematic or reference pictures for how to double check! The hum goes from silent with the bridge pickup, to hum city in the middle position, to chernobyl melt down with the neck p90. I'd like to add that I typically like to play high gain amplifiers and the P90 hum is going to be amplified; I get it.... it's part of the package for having a P90. When turning the gain down to a clean sound the hum is still present and amplified partially in the middle and highly in the p90 position. Love this guitar so going to troubleshoot it all the way through!

 

Annother thread on the Lee Malia Explorer.... Lee Malia dummy coil problems?

 

Megafrog also had issues at first with his Lee Malia RD, he may be able to help.....

 

 

Edited by mihcmac

Share this post


Link to post
Share on other sites

Thanks man. I messaged the OP for information or possible control cavity picture. Appears he and Megafrog have been inactive for quite a bit however. I'm determined to figure this one out!

Share this post


Link to post
Share on other sites

Did some messing around and I believe I found a fix or at least a drastic improvement.

 

Turning the dummy coil around, as in making what was facing towards the front/string side face towards the rear/control cavity sound, really decreased the hum.

 

For reference, the dummy coil is located in a cavity in the rear side of the guitar and is positioned in similar mounting and direction as the P90. Could someone who is more experienced than myself advise if this could be a potential fix or perhaps the theory behind how this worked? Thanks!

Edited by proceedeth

Share this post


Link to post
Share on other sites

Back to the drawing board.... I was using a Line 6 Helix on a few different settings and concluded it was fixed in my previous post (turning dummy coil around) but it's not the case!

 

I played the RD just now through some hi gain settings on a Sunn Beta Lead and an OR15. The hum of the P90 neck is audible to the same extent of the bridge humbucker when coil split; there's almost no difference between the two. Using anytype of OD with the humbucker is fine but using the p90 neck is the exact same unusable hum as the humbucker split.

 

Any advice on troubleshooting would be appreciated! Also, if anyone is familiar with this guitar or the Explorer, did the dummy coil cause hum cancellation for the bridge when split? thank you.

Edited by proceedeth

Share this post


Link to post
Share on other sites

Hi there. I had a similar problem with a new ESP LTD Viper 256p. The neck P90 was supposed to be hum cancelling but it hummed to my ears worse than a standard P90.

 

I read somewhere on the Internet, was actually a cached Musicians Friend page for my model with reviews. One of the reviews mentioned the hum and they swapped a couple of wires in the control cavity. I reversed two wires and the hum was gone.

 

I cannot access that MF page as I am in the UK and MF has blocked access to my country due to trading restrictions. I will look inside my Viper tomorrow to try remember which wires I swapped. This was a mistake in the wiring at the factory so there were more than a few guitars affected.

 

The noiseless P90s have two coils in series like a humbucker. There should be 4 wires plus maybe a bare screen. One wire goes to hot terminal on the volume pot or sometimes the switch, one wire goes to earth usually on the pot casing together with the bare wire if present and the other two wires are soldered together to make the series connection. It was one of these wires which were joined together that I swapped with the hot wire.

Share this post


Link to post
Share on other sites

FYI..... The Artisan series uses a 2 wire Gibson USA P-94™ Single Coil in the neck position with a separate Dummy coil for hum cancelling mounted in the back of the guitar between the pickups.. There have been reports of Dummy coil or P94 wiring problems on both the RD and Explorer models..... The P94 and the Dummy coil both use 2 wires, if either ones wires get reversed it will cause problems..

 

LEERD5.jpg

Edited by mihcmac

Share this post


Link to post
Share on other sites

Sorry, I was confusing my ESP pickups which are stacked P90s like Gibson P100. Now I understand the Lee Malia wiring.

 

It must be the dummy coil is wired in series and should be out of phase. In that case the problem could be the dummy coil is in phase so not cancelling out the hum. Could be worth a try to reverse the connections on the dummy coil and see if it improves the signal.

Edited by mirrorboy

Share this post


Link to post
Share on other sites

Still having an issue after having a few techs look into it. The dummy coil and p90 hot wires (white) are wired together, the dummy coil ground is soldered to the volume pot, and the p90 ground is soldered to volume pot lug #3. 

I'm thinking about rewiring it myself but I don't want to get in over my head and screw it up. I've built a few guitar pedals but haven't worked on guitar wiring before.

iQrfR1k.jpg

 

I did come across two examples of why I feel this may be a defect in the factory wiring; I have a similar thread posted to TheGearPage and a user posted a tech advised the fix included wiring the P90 hot to the Dummy Coil ground: https://www.thegearpage.net/board/index.php?posts/28531187/

 

I've found a post on Seymour Duncan forums involving wiring a dummy coil with a P90: https://www.seymourduncan.com/forum/showthread.php?291812-Pickup-Wiring-quot-Gods-quot-need-your-help-re-Wiring-a-P90-Dummy-Coil-in-Series (Pat 1) https://www.seymourduncan.com/forum/showthread.php?292335-PART-2-gt-Pickup-Wiring-quot-Gods-quot-gt-help-please-re-Wiring-a-2P-DPDT-for-P90-Dummy-Coil (Part 2). The OP posted a diagram in Part 2 with the black to white connection. 

 

Do yall think Epiphone would release a wiring diagram or schematic if I asked?


 

 

Share this post


Link to post
Share on other sites
On 5/21/2019 at 4:47 PM, mirrorboy said:

It must be the dummy coil is wired in series and should be out of phase. In that case the problem could be the dummy coil is in phase so not cancelling out the hum. Could be worth a try to reverse the connections on the dummy coil and see if it improves the signal.

 

On 5/25/2019 at 9:10 AM, proceedeth said:

Still having an issue after having a few techs look into it. The dummy coil and p90 hot wires (white) are wired together, the dummy coil ground is soldered to the volume pot, and the p90 ground is soldered to volume pot lug #3. 

I'm thinking about rewiring it myself but I don't want to get in over my head and screw it up. I've built a few guitar pedals but haven't worked on guitar wiring before.

iQrfR1k.jpg


I did come across  a user posted a tech advised the fix included wiring the P90 hot to the Dummy Coil ground

I've found a post on Seymour Duncan forums.... The OP posted a diagram in Part 2 with the black to white connection. 

 

 

Hey there Pro,

 

you've found the fix, the appears to have been a colour coding issue with the Dummy coil, just follow the advice you found/were provided. Just swap the connections on the dummy coil and problem solved. Piece of cake.

Have a good one.

 

Johnny 
 

 

 

Share this post


Link to post
Share on other sites

Johnny, thanks for update! I did so many swaps I lost track! but I do have good news:

Gibson provided the schematic! Epiphone Lee Malia RD Custom Wiring Diagram

I wired my guitar back to the factory spec (white to white leads)  and can summarize my wiring issue now to this:

  • non-functional dummy coil with 60 cycle hum- connecting the Neck PU shield wire to ground introduces hum into the signal equivalent to the bridge humbucker in coil split (typical 60 hz hum)
  • functional dummy coil with grounding issue - disconnecting the Neck PU shield wire from ground drastically lowers the audio signal (in between humbucker quiet and single coil noise) but creates the grounding hiss issue resolved by touching strings/bridge


The functional dummy coil wiring is much much prefered and it sound great when playing - but the grounding issue is creating another type of noise issue to work on. Any suggestions on the grounding for this?

Johnny - whats your take on the white to white sounding good but with the Neck PU shield grounding/hum issue?

DIA-LEE MALIA RD CUSTOM-r3_compressed (1).pdf

Edited by proceedeth

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...