Jump to content
Gibson Brands Forums
MHargis

*Lets talk* 1st run Gibson Chet Adkins Country Gent! What do you have? No Gretch Please

Recommended Posts

*Lets talk*

I am looking for more info on the 1st run  Gibson Chet Adkins Country Gent. Looking for the changes that where made at the factory and the Mods you did.

I know Gretsch has wonderful CGs but please, Gibson only on this thread.

Here is my 1989 Gibson Chet Atkins Country Gentleman w/OHSC Highly Moddified by Hot Rod Hargis
I recivied this with shipping damage along with years of abuse so it got some mod's
Has wear on the gold plating.
Has some checking , scratches and scuffs.Front & back.

Body size at lower bout: 17". Scale length: 25 1/2" Nut Width: 1 3/4" Body depth: 1 3/4" 

Cosmetic Condition: Very Good,  Various minor nicks, chips, dents & dings; surface scratches & some finish wear with some buckle rash
 through the finish to the wood on the back. 
 There's a professionally repaired headstock crack that is stable with no movement & does not affect playability or sound quality, original owners children
 said it was repaired by Gibson in Nashville, Nice job!

Neck:  Medium profile maple neck with ebony fingerboard.  Red & white block fret markers starting at the 3rd fret (Rare). 
 Frets show little wear and have plenty of life in them. Neck is straight & truss rod is in good working condition.

Body: Semi-hollow maple body with single rounded cutaway.  Multi-bound top & back.ating ebony  Tortoise pickguard with 5-ply binding.  Guitar weighs 10.60 lbs.

Materials: Maple laminate body; solid 3 piece maple neck; solid ebony fingerboard; thumbprint fingerboard inlay and thistle peghead inlay; 7 ply top binding,
 5 ply back binding, bound soundholes.

Hardware: Original gold hardware includes Gibson Schaller 'Crank Winder' tuners with tulip keys, Gibson tuners are in perfect working condition.
 Tunematic roller bridge with inlaid ebony base with mother of pearl inlays.; Gibson 492R neck and 490T bridge humbucking pickups; 5 ply bound tortoise pickguard.

Notes: Some three decades after Nashville superstar Chet Atkins debuted his original Country Gentleman model from the Gretsch company,
 he approached Gibson with some design refinements for a new version of the legendary model. The new instrument would be shallower in depth to
 make it easier to hold, have wider spaced pickups to facilitate fingerstyle play, and have a lighter weight body block to add sustain and curb feedback.
 A handily placed master volume knob, classic Bigsby, and generous 1 3/4" neck all ensured that the player had everything right at the fingertips.
 The result was the Gibson Chet Atkins Country Gentleman.

This striking guitar has been highly Moddified by Hot Rod Hargis, with 100% original gleaming cherry finish.
 Original gold hardware is in place, including Gibson's exclusive Shaller 'Crank Winder' tuners, each with a small lever that folds out from the tuning key
 to increase turning leverage, greatly increasing the speed of re-stringing. The neck has a gentle shallow D neck profile specified by Chet,
 and flawless action over excellent original medium jumbo frets.

Case: Original deluxe Gibson arched plush Pink lined hardshell case.


Moddified by Hot Rod Hargis 1/1/19
Gold Bigsby vibrato tailpiece with custom Fixed Chet handle;

Twin volume, master tone and master volume controls;
 Custom Made coin barrel knobs; 3 way p/u control switch.
Mud Switch;
Reversed Contact 3 way Toggle, north toggle .047 Audio Capacitor
south toggle .022 Audio Capacitor
Middle, switch bypass.

Varitone 6 position Rotary Switch, shortening, 
Position 1, .001 NOS Vintage Ceramic Capacitor
Position 2, .01 NOS Vintage Ceramic Capacitor 
Position 3, .015 NOS Vintage Ceramic Capacitor 
Position 4, .022 NOS Vintage Ceramic Capacitor 
Position 5, .033 NOS Vintage Ceramic Capacitor
Position 6, .047 NOS Vintage Ceramic Capacitor 

Redundant ground wires.

IMG_5199.JPG

IMG_5143.JPG

Share this post


Link to post
Share on other sites
On 5/29/2019 at 1:18 PM, Dave F said:

No mods. One of the last of the Gibson run.

 

IMG_0285_zps0b2dadff.jpg

Can't see the picture

Share this post


Link to post
Share on other sites

640071553_ScreenShot2019-06-17at3_31_58PM.png.dd6e114ef571eadf1e1ebd0f411c136f.png

1987 Gibson CG / L5 early production years.  Plays and sounds like a dream !

Custom built at the Gibson factory by Jim Hutchins.   There seems to be a size limit to 105 KB so I am having to reduce the resolution of the images to be able to upload them here.

Edited by DJR

Share this post


Link to post
Share on other sites

My previous link got broke while I was doing some housekeeping

Here's my '04 with my '66. Sorry for the Gretsch content (not really)

chet%20gc%20grtsch%20gibson_zpsprsisr6h.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...