Jump to content
Gibson Brands Forums

keeping fretboard clean


Slash_is_a_ho

Recommended Posts

I used Lemon Oil forever. But this last time I cleaned my Fretboard, I decided to use the "Valve, Slide, & Key" oil that I use to keep my Trumpet in Playing Conditon (not that I play it). It took the Grime right off and worked right into the wood without much Excess to wipe away.

 

I'm using it on a MIM Deluxe Players Stratocaster and an old '95 Nighthawk, not a Jimmy Page Les Paul, so you might not want to try something so untested.

 

Maybe a Shamwow! [-(

Link to comment
Share on other sites

A good oil to use (sparingly) is Boiled Linseed Oil which can be purchased at most hardware stores. This is what Taylor has recommended for their acoustic guitars. I find that the ebony boards on my Taylors need it maybe once every couple years but my Gibson AJ's rosewood board requires it about once a year.

 

What I do is usually clean the board during a string change. I pull all the old strings off, cover my soundhole to mask off any electronics with magnets, hit the frets with 0000 steelwool which also cleans off any gunk, then if needed I can use some Naptha (lighter fluid) to get any greasy spots, wipe down the board with only a couple drops of the boiled linseed oil, let it sit for a few minutes (smoke break), wipe off the excess, re-string and I am good to go for another year or two.

 

Boiled Linseed Oil is also regularly used by gun owners to oil and clean their beautiful wood gunstocks.

Link to comment
Share on other sites

Is gibson fretboard conditioner "oil" I have used it once because my fretboard seemed a bit dry when I got my LP. It worked great from what I can tell, the fretboard looks "alive" now, and feels great. If it is oil, I get the once a year or so deal, but if it is not, how often is good for the conditioner, and do I really need to use some sort of oil in addition to it?

Link to comment
Share on other sites

 

So this stuff is safe on any guitar?

 

I've seen them around the place but never really knew what they were...

 

I can say it's safe on maple, rw or ebony boards as well as very expensive mop and paua inlay work and binding. I've used it for over 10 years now with no problems or complaints. Great for a clean-up after playing and when re-stringing.

Link to comment
Share on other sites

Is gibson fretboard conditioner "oil" I have used it once because my fretboard seemed a bit dry when I got my LP. It worked great from what I can tell' date=' the fretboard looks "alive" now, and feels great. If it is oil, I get the once a year or so deal, but if it is not, how often is good for the conditioner, and do I really need to use some sort of oil in addition to it?[/quote']

 

I don't know what it's made from but I figure I can't go wrong if Gibsons sez so. I use it and nothing else, put it on once or twice a year. No issues with it - ever.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...