Jump to content
Gibson Brands Forums
Sign in to follow this  
dreamingGibson

Just In! I love Florentine Cutaways! NGD!

Recommended Posts

I think I’m done. I dont need anymore guitars. This new one brings it up to three, and I certainly cannot handle any more than that. Ive had 5 and it became problematic. Lol.
 
After falling in love with Florentine Cutaways, specifically the ES-125TDC, I searched high and low for an affordable, yet built solidly, and has quality feel to it.
 
The new 2019 Epiphone George Thorogood ES125 was a surprise, I was really thinking of buying it, but I have my hesitations, especially after having a Casino made in the Epiphone Factory in China, that has some issues I cannot get over with, I’m afraid that I might receive another guitar I will not be happy with. So I kept looking..
 
This leaves me with plenty more choices, but some are even harder to find. The only things I want are 2 P90s, Florentine Cutaway, With/without Bigsby, must be made in Korea or Japan. I’ve found a few new production guitars from Japan made in Terada Factory, but it would require me to sell my telecasters to fund it, and I dont want to do that. I also found a vintage Es-125TDC in players grade condition, but it would also require selling of my guitars plus additional luthier fees for checking, maybe resetting of the neck, and other various issues that a vintage guitar has.. so I passed on it.. I also want it in the same exact shape of an ES-125TDC. Maybe a little variation of the cutaway but not too much.
 
All the waiting and searching paid off. Finally I was able to track down one guitar in my list and in the color that I want. A Peerless Factory made 1996 Epiphone Sorrento
 
 
49715857711_7c34102a51_k.jpg
 
 
49716173282_bbeaddde39_k.jpg
 
 
The quality is very nice. If you’ve ever had the newer Gretsch Electromatic (5xxx) from Korea, it has the same quality feel to it. Solid and not flimsy. Good weight and The neck, even if it’s slim, feels stable. The nut width isnt as narrow as I was expecting it to be; making it a pleasant surprise as it is close to my vintage spec teles (42mm nut width), so very little adjustment when switching between guitars.
 
 
49716173432_d30e4e85c3_k.jpg
 
 
But there are tons to do. Since my luthier’s shop is closed, this will be my first ever guitar that I will perform some minor fretwork. The frets are tarnished and I just need to remove that greeny stuff and polish it again without changing the fret level. I dont want to risk removing any fret material. I just want to enjoy playing it and do some bends without the scratchy feeling frets. Then setting this up with 11’s and tweaking the pickup, specifically the pole pieces to get that sweet spot!
 
The nut looks good, and the fretboard feels nice! It doesnt feel like cheap rosewood. It actually feels like an old growth rosewood and it isnt even dry! Its dark chocolate looking and little streaks. Maybe put some wood conditioner after I’m done with the frets.
 
 
 
49716170912_c0d21feec6_k.jpg
 
 
 
49703038321_6610b66a55_k.jpg
 
 
Came in a good time before the really strict quarantine rules get implemented. I’ll have no problem staying at home with this one.
 
Keep safe y’all.
Edited by dreamingGibson

Share this post


Link to post
Share on other sites
My first ever minor fret work polish..
 
There are some fret wear on the first few frets, but nothing deep..
 
The tarnish is so hard, scotch brite didnt work.. its not removing anything so had to use steel wool
 
49718842441_198931c517_b.jpg
 
Before and after!
 
49703352267_68d3160dda_o.jpg
 
49719154867_1271e9dbce_b.jpg
 
 
then a little bit of Australian Orange Oil Wood conditioner
 
49718842456_ae95c9f842_b.jpg
 
49719154877_2789ee212d_b.jpg

Share this post


Link to post
Share on other sites
Initial set up done.. Still waiting for the neck to react/move to the higher tension of 11s.. So I didnt touch the truss rod at the moment..
 
49720329022_e56584f45c_b.jpg
 
Feels pretty good under the fingers.. as expected, narrow string spacing.. I think I'll let my luthier tweak that to Fender-ish specs.. My telecasters' frets have been professionally levelled, and I was able to set it up in the same action as my Telecasters.. pretty amazing and no fret buzz!
 
although I'm concerned about the height of the frets.. Frets 1,2,3 and 4 have varying degrees of fret wear/indentation.. Im sure it has not been touched at all, so hopefully there's enough height left when my luthier levels it.
 
49720328572_a39a639c5d_b.jpg
 
49720329042_c17a3d7a8a_b.jpg
 
I also reversed that G string-saddle.. ALL 24.75 scale guitars I have encountered that has this stock bridge is problematic with 11 gauge strings.. and this is always my solution.. I'm planning to replace this bridge with a Gotoh that has an extended range.. OR probably take out the studs, fill it with a dowel and run with a floating bridge ala ES-125TDC like what [USER=21835]@charlie chitlin[/USER] did on his..not sure yet on what to decide on, but definitely gonna replace the hardware with better ones.. those tuners arent nice!
 
49720328562_6017652d67_b.jpg
 
Anyway, very happy how it all turned out.. This is definitely what I have been looking for in an affordable price, with decent quality and solidly built hollowbody with P90s and Florentine Cutaway!
 
49719476808_823c1c137d_b.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...