Phenderphreaque Posted March 7, 2008 Share Posted March 7, 2008 The LP DC faded I just bought had an SD P-90 stack installed in the bridge, when I went to reinstall the original p'up the little brass nuts that hold the p'up into the body had poped out, they won't stay in, what would you suggest to keep the nuts in place? Will wood glue work? Any help would be great. Thanks, Lloyd Link to comment Share on other sites More sharing options...
AXE® Posted March 7, 2008 Share Posted March 7, 2008 I've always used a epoxy resin with spruce sawdust mixed in . ... Not too much dust or it will be crumbly ... Link to comment Share on other sites More sharing options...
retrosurfer1959 Posted March 7, 2008 Share Posted March 7, 2008 wood glue nope Like above epoxy or if the gap is too small good old Superglue. I am always amazed on how many times superglue works I even use it mixed with sawdust to fix gaps around inlays and nicks stuff even sands well. Link to comment Share on other sites More sharing options...
Phenderphreaque Posted March 7, 2008 Author Share Posted March 7, 2008 Thanks guys I appreciate the fixes. Lloyd Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.