RvrDxn Posted February 5, 2022 Share Posted February 5, 2022 Could that be a variation of a plate mate? https://www.stewmac.com/luthier-tools-and-supplies/tools-by-job/tools-for-bridges/plate-mate/ 1 Quote Link to comment Share on other sites More sharing options...
jchabalk Posted February 5, 2022 Share Posted February 5, 2022 6 hours ago, Boyd said: I wonder if it's some kind of electromagnetic sheilding to prevent the sort of problem I described in this post? That'd be my guess too Quote Link to comment Share on other sites More sharing options...
2penny_hangover Posted February 6, 2022 Author Share Posted February 6, 2022 On 2/5/2022 at 1:19 PM, Boyd said: I wonder if it's some kind of electromagnetic sheilding to prevent the sort of problem I described in this post? I don't believe so, since the pickup in my guitar is active. I will remove this foil and check if I'm getting interferences though Quote Link to comment Share on other sites More sharing options...
2penny_hangover Posted February 6, 2022 Author Share Posted February 6, 2022 (edited) 20 hours ago, RvrDxn said: Could that be a variation of a plate mate? I don't think it would do anything to support the bridge as it's super thin and wimpy. My guess is that it's an insulation layer for the pickup Edited February 6, 2022 by 2penny_hangover Quote Link to comment Share on other sites More sharing options...
fortyearspickn Posted February 6, 2022 Share Posted February 6, 2022 40 minutes ago, 2penny_hangover said: I don't think it would do anything to support the bridge as it's super thin and wimpy. My guess is that it's an insulation layer for the pickup My vote is with RvrDxn - a "do it yourself" plate mate, installed after market to reduce or prevent the string end balls from chewing up the bridge pin holes. Possible the holes are a little too close to to the other holes in the bridge to locate the bolts, which we've seen occurred in prior years at Bozeman. Quote Link to comment Share on other sites More sharing options...
62burst Posted February 6, 2022 Share Posted February 6, 2022 (edited) 1 hour ago, fortyearspickn said: My vote is with RvrDxn - a "do it yourself" plate mate, installed after market to reduce or prevent the string end balls from chewing up the bridge pin holes. Possible the holes are a little too close to to the other holes in the bridge to locate the bolts, which we've seen occurred in prior years at Bozeman. That's what I thought when when I replied soon after 2Penny_ first mentioned it, . . . and he used the word "plate" in his post. A luthier once thought he was doing me a favor, and installed a PlateMate on my guitar, and that .032" plate is fairly thick, and definitely tearing one like the OP's is torn would be unlikely. But seeing the copper color, knowing copper's use as e shielding, and having a look at how thin and torn it was on his HB, and that if this was a TV-HB, then the onboard electronics would've been an aftermarket add-on which might've brought on some buzz issues. But OP 2Penny_ also mentioned buzz between the nut and fretted note, which might mean making sure humidity level is ok, and/or taking a closer look at the ramping of the nut. Edited February 6, 2022 by 62burst Quote Link to comment Share on other sites More sharing options...
Boyd Posted February 6, 2022 Share Posted February 6, 2022 (edited) Sure looks like thin foil to me. Look at the area around the holes, where it's curled up, as though it was just "poked" through. The "plate mate" is much thicker, squared-off and has drilled holes with smooth edges. Might also be brass shim-stock which is thin metal, like a heavy foil. Edited February 6, 2022 by Boyd Quote Link to comment Share on other sites More sharing options...
62burst Posted February 6, 2022 Share Posted February 6, 2022 13 minutes ago, Boyd said: Sure looks like thin foil to me. Yes. I hope my last two posts communicated that. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.